Unlock user code trên FPT 2sim chip Spreadtrum done
http://cB9.upanh.com/22.636.29642998.r2M0/fptgf.jpg
Unlock user code trên FPT 2sim chip Spreadtrum done
http://cB9.upanh.com/22.636.29642998.r2M0/fptgf.jpg
hehe ủng hộ ếch thêm con zte X670 unlock done! super hot :cool:
Initializing...
DA_LIB_VER_3.6.0.0
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=22 TXD=23
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
checking network/sp/sim lock status...
Unlock done.
unlock xong sẽ banh imei , để thì cũng ko sao nhưng nổi cái chữ " imei ko hợp lệ" chà bá kỳ quá muốn repair cũng ok luôn
http://upnhanh.sieuthinhanh.com/tmpi...znw428375.jpeg
Ủng hộ Smod con nửa nè,repair MOBISTAR B129 (2sim) oki mã bảo vệ.
Initializing...
DA_LIB_VER_3.6.0.0
It is sensing the pinout fast...
RXD=19 TXD=18
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100026A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 230400 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 240189
Privacy protect: 0000
Done.
ủng hộ 1 em qmobile F368 mã bảo vệ
Initializing...
DA_LIB_VER_3.6.0.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=22 TXD=24
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6235, HardwareVer:8A01, SoftwareVer:8A04
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=19950511
http://nc9.upanh.com/b4.s15.d2/8d9fe...407289.anh.jpg
qmobile Q24i mã bảo vệ
Initializing...
DA_LIB_VER_3.6.0.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=24 TXD=22
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=0000
Code=9224