[Chia sẻ] fix camera x3 ok by best tool

mới thay cặp con x3,lỗi camera dùng phoenix,mxkey ko dc.nhịn ăn nhịn uống ra mua cái best tool.làm trong 1 nốt nhạc ok.info cho ae thấy.ae có cách nào nữa bổ xung thêm.đừng chém tội nghiệp
Get keys...
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_KEYBOARD_STUCK_TEST
MINOR | ST_CAMERA_IF_TEST
PASSED | ST_LCD_TEST
PASSED | ST_LPRF_IF_TEST
PASSED | ST_LPRF_AUDIO_LINES_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_RADIO_TEST
PASSED | ST_KELVIN_BATVOLTAGE_TEST
PASSED | ST_KELVIN_VIBRA_TEST
PASSED | ST_KELVIN_CAPACITOR_TEST
->ERROR | ST_KELVIN_MISC_TEST
->ERROR | ST_KELVIN_MIC_TEST
PASSED | ST_KELVIN_CHARGING_TEST
PASSED | ST_KELVIN_AUDIO_TEST
PASSED | ST_KELVIN_XEAR_TEST
PASSED | ST_INTERNAL_ANTENNA_TEST
PASSED | ST_HEADSET_AMPLIFIER_TEST
PASSED | ST_BACKLIGHT_TEST
PASSED | ST_SIM_LOCK_TEST
PASSED | ST_SECURITY_TEST
PASSED | ST_BT_WAKEUP_TEST
PASSED | ST_HOOKINT_TEST
PASSED | ST_TAHVOINT_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_MBUS_RX_TX_LOOP_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CDSP_SLEEPCLOCK_FREQ_TEST
NOT EXECUTED | ST_CDSP_RF_BB_IF_TEST
NOT RUN | ST_CDSP_GSM_TX_POWER_TEST
NOT EXECUTED | ST_CDSP_RF_SUPPLY_TEST
NOT RUN | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
NOT EXECUTED | ST_CDSP_PWR_DETECTOR_BIAS_TEST
NOT RUN | ST_CDSP_RX_IQ_TEST
SelfTests end
Done!

Elapsed: 00:03:48

Phone disconected!
Checking Camera Configuration...
Operating mode is OK, no need change...

CAM1 HW : NI00IIIIRR0301035420
CAM1 SW ver : XXXXXX [ SW damaged ]
Updating Camera #1 Configuration...
Upload done, checking...
CAM1 SW ver : 003008
Configuration Ok!

Secondary Camera #2 configuration info not exist

Done!

Initializing Tests...
IMEI : 359367039649405 , Phone : RM-540 Nokia X3-00
Get keys...
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_KEYBOARD_STUCK_TEST
PASSED | ST_CAMERA_IF_TEST
PASSED | ST_LCD_TEST
PASSED | ST_LPRF_IF_TEST
PASSED | ST_LPRF_AUDIO_LINES_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_RADIO_TEST
PASSED | ST_KELVIN_BATVOLTAGE_TEST
PASSED | ST_KELVIN_VIBRA_TEST
PASSED | ST_KELVIN_CAPACITOR_TEST
->ERROR | ST_KELVIN_MISC_TEST
->ERROR | ST_KELVIN_MIC_TEST
PASSED | ST_KELVIN_CHARGING_TEST
PASSED | ST_KELVIN_AUDIO_TEST
PASSED | ST_KELVIN_XEAR_TEST
PASSED | ST_INTERNAL_ANTENNA_TEST
->ERROR | ST_HEADSET_AMPLIFIER_TEST
PASSED | ST_BACKLIGHT_TEST
PASSED | ST_SIM_LOCK_TEST
PASSED | ST_SECURITY_TEST
PASSED | ST_BT_WAKEUP_TEST
PASSED | ST_HOOKINT_TEST
PASSED | ST_TAHVOINT_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_MBUS_RX_TX_LOOP_TEST
PASSED | ST_PWR_KEY_TEST
NOT EXECUTED | ST_CDSP_SLEEPCLOCK_FREQ_TEST
NOT EXECUTED | ST_CDSP_RF_BB_IF_TEST
NOT RUN | ST_CDSP_GSM_TX_POWER_TEST
NOT EXECUTED | ST_CDSP_RF_SUPPLY_TEST
NOT RUN | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
NOT EXECUTED | ST_CDSP_PWR_DETECTOR_BIAS_TEST
NOT RUN | ST_CDSP_RX_IQ_TEST
SelfTests end
Done!

Elapsed: 00:01:38

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Checking Camera Configuration...
Operating mode is OK, no need change...

CAM1 HW : NI00IIIIRR0301035420
CAM1 SW ver : 003008
Updating Camera #1 Configuration...
Upload done, checking...
CAM1 SW ver : 003008
Configuration Ok!

Secondary Camera #2 configuration info not exist

Done!

Try Read Camera Configuration to base...

Camera HW : NI00IIIIRR0301035420
Camera configuration exist, skip saving...

Camera HW : NI00IIIIRR0301035420
Camera configuration exist, skip saving...

Done!

Resetting selected items...
Check phone mode...
Phone in Normal mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:16

Phone disconected!

Connect phone on selected interface...