3110c cần giúp!

mình nhận cây 3110c chạy lại pm lúc đầu bus check không được nên mình vệ sinh main thì check được nhưng nạp flash vào thì bị treo luôn giờ thì mất nguồn,check lại thì nó

MXKEY Serial: [FT SCR2000 0] - C0817F31
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Driver: UFS2XX, ver: 1.6.6.0 , NTMP ver: 1.6.6.1
Module ver: 1.0.0.17602(14-06-2011), Library ver: 1.0.0.12920(08-10-2011)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
EM0 ID: 00000232
EM1 ID: 00000353
PUBLIC ID: 03100109F8450052D9A14A3CE0E968D373C85BF3
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
FlashID0: 0020 881C - 0000 6A21 [ST M58LR256JU,256 Mbits] type: NOR,CMT
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 1.40.0 revision: 0.0 size: 0x22C10
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS is blank/erased.
TransmissionMode: DDR&TX2
Original Imei: 00000000000000
Original Product code:

mong các sư huynh giúp đở vì khách đang hối lấy.

chạy lại bằng usb bạn hiền

Imei: 00000000000000

có lẽ file back up teo rồi,trc tiên gia cố lại ic và flash lại xem có tiến triển k?.nếu có file back up thì cứu nguy đc,k thì thay cặp thôi

file backup đây đúng không bạn< BB5_35697401760739_BACK.rpl>

đây chỉ là log check thôi.mang qua HWK Flast lại đi bạn hiền.chắc OK
nếu không ùng USB Flast lại bằng MX luôn rồi quang cái LOG Flast lên cho ae xem

Cái này cũng chưa nói lên được điều gì
bạn chạy lại bằng usb xem thế nào đã

MXKEY Serial: [FT SCR2000 0] - C0817F31
Driver: NMWCD, ver: 7.1.32.67
Module ver: 1.0.0.17602(14-06-2011), Library ver: 1.0.0.12920(08-10-2011)
Processing MCU file: 3110c_TV_OK.mcusw
[BB5,BB5 ALGORITHM] size: 14.49 MB
Supported Ids: 0103192101001101, 010C192101001101
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 472EEA3
CMT SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
CMT EM0 ID: 00000232
CMT EM1 ID: 00000353
CMT PUBLIC ID: 03100109F8450052D9A14A3CE0E968D373C85BF3
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID: 191EC665DFAAF68F
Flashing CMT Update Server Data, ULO: 0x38C0 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, UPDAPP: 0x3DFC0 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, PASUBTOC: 0x4BF80 bytes
Update Server code succesfully sent to phone.

nó tới đó là đứng luôn rồi bạn

check lại bằng usb nó báo

MXKEY Serial: [FT SCR2000 0] - C0817F31
Driver: NMWCD, ver: 7.1.32.67
Module ver: 1.0.0.17602(14-06-2011), Library ver: 1.0.0.12920(08-10-2011)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 472EEA3
CMT SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
CMT EM0 ID: 00000232
CMT EM1 ID: 00000353
CMT PUBLIC ID: 03100109F8450052D9A14A3CE0E968D373C85BF3
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID: 191EC665DFAAF68F
Flashing CMT Update Server Data, ULO: 0x38C0 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, UPDAPP: 0x3DFC0 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, PASUBTOC: 0x4BF80 bytes
Update Server code succesfully sent to phone.

Waiting for device boot up ...
Phone not found, retrying ...
Phone not responding !

thử box ATF đi cũng god lắm đó...................

nhờ ae xem lỗi gì vậy

MXKEY Serial: [FT SCR2000 0] - C0817F31
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Driver: UFS2XX, ver: 1.6.6.0 , NTMP ver: 1.6.6.1
Module ver: 1.0.0.17602(14-06-2011), Library ver: 1.0.0.12920(08-10-2011)
Processing MCU file: 3110c_TV_OK.mcusw
[BB5,BB5 ALGORITHM] size: 14.49 MB
Supported Ids: 0103192101001101, 010C192101001101
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
EM0 ID: 00000232
EM1 ID: 00000353
PUBLIC ID: 03100109F8450052D9A14A3CE0E968D373C85BF3
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
FlashID0: 0020 881C - 0000 6A21 [ST M58LR256JU,256 Mbits] type: NOR,CMT
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 1.40.0 revision: 0.0 size: 0x22C10
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS is blank/erased.
TransmissionMode: DDR&TX2
Storing certificate [NPC, VARIANT, R&D] ...OK
Erase size: 16.37 MB
CMT NOR area [00000000-000006BF] erased in 0.110 s

CMT NOR area [000006C0-0001FFFF] erased in 0.172 s

CMT NOR area [00020000-0007FFFF] erased in 0.203 s

CMT NOR area [00080000-000DFFFF] erased in 0.204 s

CMT NOR area [00100000-001FFFFF] erased in 0.343 s

CMT NOR area [00200000-0031FFFF] erased in 3.000 s

CMT NOR area [00320000-0105FFFF] erased in 8.032 s

CMT NOR area [01060000-01067FFF] erased in 0.156 s

CMT NOR area [01068000-0107FFFF] erased in 0.156 s

Flash programming ...
Error chk C7012D0103CD000090000000F1
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x00000400, Result: 0090
Task failed at (0800001C)!!!
Last RX buffer: C7 01 2D 01 03 CD 00 00 90 00 00 00 F1 72

Lắc lại 2 con nguồn và cặp chương trình
sau đó chạy lại ver cao hơn xem thế nào?