7100s cần ae giúp....

mình nhận cây 7100s , khách nói có rớt nước nhưng xài dc khoảng 30s thì máy trắng màn hình tự reset , mình đã luộc kỹ và nạp pm rồi vẫn not ok ae cho ý kiến , thanks all

lắc upp cho nó cái coi sao

Đóng vào BOX rồi boot cái Log lên cho anh em xem với nhé !

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C085E6B5
Using device: HTI, FW ver: 00.50, SN: 00015258
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7601.17514
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
ASIC ID: 0x3168 [UPP_8M ver: 6.4]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61B 2310 0340 C605 E401 20A2 0000
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00172A5F:3B8ADA60
ASIC type: 11
UEM Imei: 35679102596751
Flash Imei: 35679102596751
MasterCode: 0003516605
RPL saved to "C:\mobileEx\3.5\data\backup\35679102596751_BACK.r pl"

Phone type: RM-438 (Nokia 7100s-2)
SW version: V 06.31 24-03-09 RM-438 (c) Nokia
Imei plain: 35679102596751-8
Imei OTP: 35679102596751
Product code: 0569301
Cellular system: GSM
ASIC ID: 0x3168, type: 11
Ppm Id: V
Language Pack:
- not available.

Master code: 3315247032

Imei net: 35679102596751
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
mình đóng cpu lại rồi vẫn ko hết và đây là log bus của e nó , ae xem giúp nha

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C085E6B5
Using device: HTI, FW ver: 00.50, SN: 00015258
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7601.17514
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\35679102596751_BACK.r pl).
Processing MCU file: rm438__06.31.mcusw
[DCT4,DCT4 ALGORITHM] size: 12.02 MB
Supported Ids: 3160, 3161, 3162, 3164, 3166, 3168
ASIC ID: 0x3168 [UPP_8M ver: 6.4]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 2310 0340 C605 E401 20A2 0000
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00172A5F:3B8ADA60
Area [01000000-0101FFFF] erased in 1.196 s
Area [01020000-01C1FFFF] erased in 1 min 54.855 s
Flash programming ...
Programming completed in 1 min 34.023 s
File processed in 3 min 37.070 s
Processing CNT file: rm438__06.31.image_v
[DCT4,DCT4 ALGORITHM] page size: 128 K size: 7.75 MB
Supported Ids: 3160, 3161, 3162, 3164, 3166, 3168
ASIC ID: 0x3168 [UPP_8M ver: 6.4]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 2310 0340 C605 E401 20A2 0000
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00172A5F:C5A4DA78
Area [021A0000-02E7FFFF] erased in 2 min 2.083 s
Area [02E80000-02FBFFFF] erased in 11.902 s
Converting UCP blocks to 128 K.
Flash programming ...
Programming completed in 1 min 3.883 s
Extracting Content Pack, (c) Nokia File Server
Content Pack extracted successfully in 0.052 s
File processed in 3 min 47.595 s
Processing PPM file: rm438__06.31.ppm_v
[DCT4,DCT4 ALGORITHM] size: 4.99 MB
Supported Ids: 3160, 3161, 3162, 3164, 3166, 3168
ASIC ID: 0x3168 [UPP_8M ver: 6.4]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 2310 0340 C605 E401 20A2 0000
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00172A5F:2984DA60
Area [01C20000-0219FFFF] erased in 53.250 s
Flash programming ...
Programming completed in 39.051 s
File processed in 1 min 39.291 s
Total time for flashing process(boot+erase+write) was 9 min 3.967 s


Phone type: RM-438 (Nokia 7100s-2)
SW version: V 06.31 24-03-09 RM-438 (c) Nokia
Imei plain: 35679102596751-8
Imei OTP: 35679102596751
Product code: 0569301
Cellular system: GSM
ASIC ID: 0x3168, type: 11
Ppm Id: V
Language Pack:
- not available.

Master code: 3315247032

Imei net: 35679102596751
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
mình đóng cpu và flash lại giờ thì máy hiện contact service luôn, ae xem giúp cái thanks all

ae đâu hết rồi ko ai giúp hết vậy

cái này khả năng dea upp nhiều bạn nè.như 1202 á.vô nước rất hay dea bật 1 lúc trắng treo luôn.nhưng dù sao cũng nên đóng lại hết tất cả các ic nếu có thể đi bạn

mình đã đóng flash , nguồn , cpu , rồi vẫn vậy , chắc phải thay cpu rồi , ae cho mình hỏi luôn cpu con này dùng chung những dòng nào vậy ?

Trích:

---

Được post bởi sang_apple

mình đã đóng flash , nguồn , cpu , rồi vẫn vậy , chắc phải thay cpu rồi , ae cho mình hỏi luôn cpu con này dùng chung những dòng nào vậy ?

---

chua có dịp mần con này nên cũng o biết nữa.nhưng mà id này

Trích:

---

3168

---

thì khả năng chung với 2760 hoặc những máy tuơng tụ chức năng như thế.nếu sai thì ae đừng chém nhé.vì cũng chưa có mần nó