C2-03 buss check được nhưng bật không lên nguồn xin mấy huynh chỉ Giáo thank Múc,

em nhận con C2-03 khách bảo là do rơi đất , em tháo máy ra thì đã qua thợ làm Cpu rồi bật nguồn không có dao động , em tháo ra làm lại thì co dao động đúng như máy lên nguồn , nhưng thay mấy cục pin , tahy cáp cũng bật không lên nguồn , tức quá bỏ Vào Mx Key Bus = USB thi nó ra cái này xin các huynh chỉ giáo Thank :MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C08598C8
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.70
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: EAC265
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.37
EBL version : Quantum_Bootloader_10.37_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbps
Flash ID: 0089 8982 [Intel NU48F512,512 Mbits]
Waiting for device boot up ...
Device connected: nmwcdc\Nokia USB Phonet, PORT_ID: 54DC510
Verifying communication to device OK.


Phone type: RM-702 (C2-03)
SW version: V 06.97 20-09-11 RM-702 (c) Nokia
Imei plain: 35903504238782-2
Product code: 059L5S8
Battery voltage: 3927 mV, current: 105 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
Camera config: 06150123007025, ver:

Imei net: 35903504238782
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

lấy phoenix múc thử cái đi ơi không hết lấy mx box cái nhé anh

nâng ver lên cao nữa đi bạn.

đẹp thế kia còn gì nữa..chạy đụng nóc xem sao.mà hình như Ver đó là cao nhât rồi.
bạn tes thử cái cáp khác xem sao

em thay cáp rồi , thay cả pin , đây là ver em vừa chạy mx key nè :MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C08598C8
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.70
Module ver: 1.0.0.19228(10-11-2011), Library ver: 1.0.0.13150(10-11-2011)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: EAC265
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.37
EBL version : Quantum_Bootloader_10.37_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbps
Flash ID: 0089 8982 [Intel NU48F512,512 Mbits]
Processing file: rm702__06.97.mcusw
Downloading item CODE:rm702__06.97.mcusw_ebl_psi.fls, num block: 4, size: 28 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.407 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.391 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.672 s
Erasing area 0x40280000-0x41D3FFFE ...OK
Programming completed in 39.812 s
Checksum verified (0xA701)
Processing file: rm702__06.97.ppm_v
Downloading item CUST:package_v.ppm_ebl_psi.fls, num block: 1, size: 5.26 MB
Erasing area 0x41DC0000-0x42300772 ...OK
Programming completed in 7.844 s
Checksum verified (0x5007)
Processing file: rm702__06.97.image_v_059D470
Downloading item CUST:package_v_059D470.image.fls, num block: 1, size: 11.75 MB
Erasing area 0x424C0000-0x43E1FFFE ...OK
Programming completed in 16.281 s
Checksum verified (0xB8B2)
Total time for flashing process(boot+erase+write) was 7 min 35.890 s
Waiting for device boot up ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: EAC265
Verifying communication to device...
ERROR: Could not verify communication !

Phone type: RM-702 (C2-03)
SW version: V 06.97 20-09-11 RM-702 (c) Nokia
Imei plain: 35903504238782-2
Product code: 059L5S8
Battery voltage: 3867 mV, current: 105 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
Camera config: 06150123007025, ver:

Imei net: 35903504238782
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
Completed in 1.328 s
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 0.578 s

C2-03 RM-702 v07.48.rar