N202 flash ok..

ae gặp cứ múc nhá/....


MXKEY [MxKey Team HTI PLUS Flasher Interface 3], SN: C087246F
Using device: USB ROM and HTI, FW ver: 00.50, SN: 01008C27
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.75
Module ver: 1.0.0.20814(05-05-2012), Library ver: 1.0.0.14060(05-05-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.47
EBL version: Quantum_Bootloader_10.47_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 00EC 3012 - 23280002 [Samsung ]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35166805455272
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_35166805455272_ back.RPL"
Processing file: rm834__20.37.mcusw
Downloading item CODE:rm834__20.37.mcusw_ebl_psi.fls, num block: 4, size: 28 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.359 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.375 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.547 s
Erasing area 0x40280000-0x41D3FFFE ...OK
Programming completed in 36.781 s
Checksum verified (0x0119)
Processing file: rm834__20.37.ppm_v
Downloading item CUST:package_v.ppm_ebl_psi.fls, num block: 1, size: 5.81 MB
Erasing area 0x41DC0000-0x4238D646 ...OK
Programming completed in 8.203 s
Checksum verified (0xECEB)
Processing file: rm834__20.37.image_v_059P2P4
Downloading item CUST:package_v_059P2P4.image.fls, num block: 1, size: 12.75 MB
Erasing area 0x424C0000-0x43E1FFFE ...OK
Programming completed in 17.640 s
Checksum verified (0x8854)
Total time for flashing process(boot+erase+write) was 4 min 23.953 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia USB Phonet, PORT_ID: 111BA6BA
Verifying communication to device OK.



Phone type: RM-834 (202)
SW version: V 20.37 31-05-12 RM-834 (c) Nokia
Imei plain: 35166805455272-3
Product code: 059M6F5
Language Pack:
- not available.

Imei net: 35166805455272
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

mxkey thì đời mới ok hết mà

là sao ta ????????????????????

bên nghean cung thấy đó nha hoạt động nhìu nghê ta

Cái này có gì đâu ! mxbox xanh & cam chiến những em này = usb ngọt như mía ấy mà. Dù sao cũng Thanks

dù sao cũng cảm ơn bạd9a334 chia sẻ