lock n200 nhờ ae xem giúp

máy lên trắng treo ,flash = phonix thế này , rồi khởi động không cần sim treo
đây là lock ae xem giúp



Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Download files list initiated
Waiting for USB device...
Booting...
Sending EBL loader...
Sending EBL...
Boot successful
Downloading file: rm761__11.56.mcusw
Erasing 131070 bytes...
Total progress: 6%
Sending data...
Total progress: 13%
Erasing 131070 bytes...
Total progress: 20%
Sending data...
Total progress: 26%
Erasing 1048574 bytes...
Total progress: 29%
Total progress: 31%
Sending data...
Total progress: 40%
Erasing 25165822 bytes...
Total progress: 42%
Total progress: 44%
Total progress: 46%
Sending data...
Total progress: 48%
Total progress: 50%
Total progress: 52%
Erasing 262142 bytes...
Total progress: 60%
Downloading file: rm761__11.56.ppm_v
Erasing 6437614 bytes...
Total progress: 62%
Total progress: 64%
Total progress: 66%
Total progress: 68%
Sending data...
Total progress: 71%
Total progress: 74%
Total progress: 78%
Downloading file: rm761__11.56.image_v_059K957_003
Erasing 15335422 bytes...
Total progress: 80%
Total progress: 82%
Total progress: 84%
Total progress: 86%
Sending data...
Total progress: 88%
Total progress: 90%
Total progress: 93%
Erasing 917502 bytes...
Total progress: 95%
Total progress: 98%
Total progress: 100%
Resetting device
Mobile device flashing completed.
Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Doing factorysets
Doing factorysets
Verifying communication to product (before flash finalizing)
Communication verified
Doing factorysets
Doing factorysets
All operations completed
Firmware updating failed.

http://vietfones.vn/forum/clear.gif Sửa Bài Viết http://vietfones.vn/forum/clear.gif Trả lời http://vietfones.vn/forum/clear.gif Trả Lời Với Trích Dẫn http://vietfones.vn/forum/images/but...iquote_40b.png

Firmware updating failed.
load ver cao nhất vè chạy bằng usb by mx box rồi quằng cái log lên xem sao

thanks bác , e đang flsh = mx báo lại sau ạ

đây là lock flash =mx ae xem giúp , máy vẫn lên rồi treo

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 1], SN: C084A96B
Using device: USB ROM and HTI, FW ver: 00.50, SN: 000160C3
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14195(13-07-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.46
EBL version: Quantum_Bootloader_10.46_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35825904821314
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD_35825904821314_ back.RPL)
Processing file: rm761__11.81.mcusw
Downloading item CODE:rm761__11.81.mcusw_ebl_psi.fls, num block: 4, size: 25.25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.375 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.359 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.890 s
Erasing area 0x40280000-0x41A7FFFE ...OK
Programming completed in 37.407 s
Checksum verified (0xBACD)
Processing file: rm761__11.81.ppm_v
Downloading item CUST:package_v.ppm_ebl_psi.fls, num block: 1, size: 6.35 MB
Erasing area 0x41A80000-0x420D8E5E ...OK
Programming completed in 8.656 s
Checksum verified (0x1EBF)
Processing file: rm761__11.81.image_v_059J5N5
Downloading item CUST:package_v_059J5N5.image.fls, num block: 1, size: 15.63 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 21.140 s
Checksum verified (0x7C42)
Total time for flashing process(boot+erase+write) was 7 min 50.516 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...
Phone not found, retrying ...
Warning: Phone did not reboot to normal mode.



FULL FACTORY... Failed! (0003)
Completed in 0.016 s