Cứu giúp em con 2700 flash giờ không lên
Em có con 2700 cứ bật lên là nháy trắng màn rồi tắt. Em vừa Flash = ATF box tự nhiên giờ màn đen thui. Bây giờ chạy ver nào nó cũng báo thế này:
Processing Image File :
rm561__09.98.mcusw
CMT Type : BB5
CMT Algorithm : BB5 ALGORITHM
Secondary Sending Speed : 3250000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 1256
Entry Point: 0x5047
Page Format : -1
MAX PAGE : 0x00004000
Processing Image File :
rm561__09.98.ppm_x
CMT Type : BB5
CMT Algorithm : BB5 ALGORITHM
Secondary Sending Speed : 3250000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 442
Entry Point: 0x00B6
Page Format : -1
MAX PAGE : 0x00004000
Processing Image File :
rm561__09.98_008.image_x_ctv_id_v2_96897
CMT Type : BB5
CMT Algorithm : BB5 ALGORITHM
Secondary Sending Speed : 3250000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 912
Entry Point: 0x00C8
Page Format : -1
MAX PAGE : 0x00004000
AUTO SELECTED DEAD USB FLASHING...
If Phone Booting does not Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly...
AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
READING BOOTROM
BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 96 (0x60) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 030C1921
ID DWORD 4 : 01033000
2 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 23200216
ID DWORD 1 : 0ACA8B56
ID DWORD 2 : 6FA3A6E1
ID DWORD 3 : E43F0BA5
ID DWORD 4 : 37AF7EA1
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 273F6D55
CRC 1 : DFAAF68F
ADL_SERVER: PROCESSING rm561__09.98.mcusw
ADL_SERVER: ROOT_KEY_HASH MATCH FOUND
ADL_SERVER: PROCESSING rm561__09.98.mcusw
ADL_SERVER: CMT CERTIFICATE BLOCK FOUND
ADL_SERVER: CMT DATA BLOCKS FOUND
ADL_SERVER: CONSOLIDATING CMT BLOCKS
ADL_SERVER: PASUBTOC BLOCK FOUND
BB5 ADL Loader Start Up... (Please Wait...)
ERROR: ADL Loader was not accepted
PAPUB Key HASH is EMPTY or BLANK.
Try "Skip ADL Check" Option or use FBUS Flashing
Booting/Flashing Failed...
Please Try Again...
Cao thủ nào giúp em với.Thanks
