nokia n9 chạy chương trình báo lỗi nhờ anh em giúp
em mới nhận 1 cây nkia n9 mỡ nguồn chỉ rung 1 cái màn hình đen thui em chạy chương trình bằng ATF cứ báo lổi nhờ anh em giúp thank/./././
1. Turn OFF Phone and wait 10 Seconds...
2. Connect the USB Cable to the PHONE Micro USB Port
3. Connect the USB Cable to the PC USB Port
TIPS & INFORMATION:
1. To Turn OFF the Phone, PRESS and HOLD the POWER
button for at least 10 Seconds...
2. Battery Charging will still work on "DEAD" Phones.
3. Factory Reset will make Flashing 15 minutes longer
and it will Totally Erase the User Data and Remove
the Phone Lock + Security Code as well...
4. Skip ADL Chk will Cold Flash the Device.
================================================== ====
================================================== ====
Waiting For Phone on USB PORT/s...
REQUIRED MODE: BOOTROM MODE
Sending PRIMARY-BOOT: SUCCESSFUL!
Waiting For Phone on USB PORT/s...
REQUIRED MODE: BOOTROM MODE
Sending SECONDARY-BOOT: SUCCESSFUL!
================================================== ====
SECURE USER DATA ERASING IN PROGRESS
================================================== ====
Secure Data Erasing takes about 15 MINUTES...
DO NOT DISCONNECT THE PHONE!!! JUST WAIT...
Estimated time to Finish Erasing: 02:42:26 (24-h Time Format)
================================================== ====
Battery Voltage Test: PASSED
Ready to Flash Images to Device...
=========================================
ERROR: MEEGO Device Flashing Failed!
Booting/Flashing Failed...
Please Try Again...
