c2-01 rm 721 nhờ các bác xem giúp cái log

Insert USB Cable to Switched OFF Phone and Power ON
USB BOOT : 60,07 [Rm-721] [2.2.0.0]
CMT ASICID: 000000010000022600000001020C192102044100
EM 1 ID : 00001051
EM 2 ID : 00001060
CMT PUBID : 0DE00119394F1449F5EB8BC4AC7A7C2C18FEA070
CMT MODE : 00
CMT HASH : 7B045400E1752022F9EB80B0DEA9C65D
CMT ROMID : 67E82268F29CEA60
CMT 2ND Bt: RAP3Gv40_2nd.fg, Ver: 11.16.0
CMT 2ND Bt: SILO OK
CMT RMID0 : 00000000-00000000
CMT MCID0 : FFFF0000-00000000
CMT FLID0 : 00EC0030-00000431, Sam OneNAND-1G
CMT RQALG : XSR 1.6
CMT 2ND Boot OK
CMT ALGO : RAP3Gv40_XSR17_alg.fg, Ver: 11.16.0
CMT KSIG0 : 8443ECD57D2EDADDAADBAD248F1B3B559E14D184
CMT ALG Boot OK
IMAGE : rm721__11.40.mcusw
CMT NAND Erase Area: 0x00020000-000203FF
CMT NAND Erase Area: 0x00060000-0009FFFF
CMT NAND Erase Area: 0x000A0000-0025FFFF
CMT NAND Erase Area: 0x003E0000-005DFFFF
CMT NAND Erase Area: 0x005E0000-010DFFFF
CMT NAND Erase Area: 0x01EC0000-01EDFFFF
CMT NAND Erase Area: 0x027C0000-02CBFFFF
CMT NAND Erase Area: 0x077C0000-07B3FFFF
CMT NAND Erase Area: 0x010E0000-01EBFFFF
CMT NAND Partition Format
CMT NAND Partition Format
CMT NAND Partition Format
CMT FLASH ERASE OK, Time: 00:00
Written: 12 Certificate(s)
CMT FLASH WRITE OK, Time: 00:57
IMAGE : rm721__11.40.image_a_059D690
CMT NAND Erase Area: 0x02CC0000-077BFFFF
CMT NAND Partition Format
CNT FLASH ERASE OK, Time: 00:00
CNT FLASH WRITE OK, Time: 00:35
IMAGE : rm721__11.40.ppm_a
CMT NAND Erase Area: 0x01EE0000-027BFFFF
PPM FLASH ERASE OK, Time: 00:00
PPM FLASH WRITE OK, Time: 00:11
Flashing Completed, Rebooting Mobile

máy tự dưng bị mở nguồn lên hiện chữ nokia rồi lại tắt

quăng cái log buscheck nên xem sao
trắ lại ko đồng bộ được rồi..kiếm file chuẩn cao nhất rồi flash lại xem
not ok chuyển box khác or dùng best crack hay phonix flash cũng dk ;)

bạn chuyển qua box khác flat lại coi thế nào

em chỉ còn n-box này thôi mx-key hỏng rồi navifim thì ko dùng dc bác nào có file chuẩn cho em xin với

mở navifime ấn CTRL +F RỒI nhập mã code sau lưng máy vào khung đó để load file muốn nhanh nữa thì cứ google seach

lấy file cao nhất đập với phonix là ok
hoặc chạy tool crack best là ok miễn cần hôp

bác co file cho em xin luôn đi em ko vào dc navifim nó báo lỗi em download Microsoft-NET-Framework-2-0.exe về cũng ko vào dc

lấy file cao nhất đập với phonix là ok
hoặc chạy tool crack best là ok miễn cần hôp

http://www.mediafire.com/download/cr...721+V11.40.exe

nokia c2-01 rm-721

Trích:

---

Được post bởi binhokls

nokia c2-01 rm-721

---

file đó rồi còn sao nữa.lấy vèchwyj bằng phoenix hay best crak đèu ok hết

hôm nay mất điện nên giờ mới vào dc vẫn ko chạy dc và đây là log của em nó

DLL not found...
BB5 Easy Service Tool v1.14.1 (c) Infinity-Box Team Ready
Connect phone on selected interface...
Connect phone on selected interface...
Selected FlashSettings : Dead-Test
Check FlashFiles, Please, wait...
Files Set for Flashing :
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102044100
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 0DE00119394F1449F5EB8BC4AC7A7C2C18FEA070
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg Rev : 3.0 Ver : 12.2.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg Rev : 3.0 Ver : 12.2.0
Boot Done! :)
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 354647052453149
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\Documents and Settings\cttKP\My Documents\Downloads\Compressed\Nokia Best (BB5 Easy Service Tool Crack) by Sniper_04\Backup\Cert\354647052453149_CRT_2nd.rpl
ADL: Close_Session
Content: 000300000000030000000300000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:00
Reboot phone now...
Afterflash not selected, skip
Done!
Elapsed: 00:00:14
Connect phone on selected interface...

Trích:

---

Được post bởi binhokls

hôm nay mất điện nên giờ mới vào dc vẫn ko chạy dc và đây là log của em nó

DLL not found...
BB5 Easy Service Tool v1.14.1 (c) Infinity-Box Team Ready
Connect phone on selected interface...
Connect phone on selected interface...
Selected FlashSettings : Dead-Test
Check FlashFiles, Please, wait...
Files Set for Flashing :
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102044100
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 0DE00119394F1449F5EB8BC4AC7A7C2C18FEA070
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg Rev : 3.0 Ver : 12.2.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg Rev : 3.0 Ver : 12.2.0
Boot Done! :)
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 354647052453149
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\Documents and Settings\cttKP\My Documents\Downloads\Compressed\Nokia Best (BB5 Easy Service Tool Crack) by Sniper_04\Backup\Cert\354647052453149_CRT_2nd.rpl
ADL: Close_Session
Content: 000300000000030000000300000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:00
Reboot phone now...
Afterflash not selected, skip
Done!
Elapsed: 00:00:14
Connect phone on selected interface...

---

chạy bằng usb by phoenix or dùng hwk là box kết nối mượn toll best crack để chạy hoặc dùng dây usb múc bằng best cũng ok

chủ thớt chạy băng best rồi đó bác. bây giờ qua phenix xem có khả quan hơn ko nếu ko được thì bung máy thôi

chạy đến đây thì bị dừng lại

DLL not found...
BB5 Easy Service Tool v1.14.1 (c) Infinity-Box Team Ready
Connect phone on selected interface...
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm721__11.40.mcusw
PPM : rm721__11.40.ppm_v
CNT : rm721__11.40_006.image_v_telecom_vn_9g7x7
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102044100
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 0DE00119394F1449F5EB8BC4AC7A7C2C18FEA070
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg Rev : 3.0 Ver : 12.2.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg Rev : 3.0 Ver : 12.2.0
Boot Done! :)
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 354647052453149
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\Documents and Settings\cttKP\My Documents\Downloads\Compressed\Nokia Best (BB5 Easy Service Tool Crack) by Sniper_04\Backup\Cert\354647052453149_CRT_2nd.rpl
===Flashing [MCU]===
Erase : Processing rm721__11.40.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm721__11.40.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 134 blocks
TIME : Write time : 00:00:58
MCU Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000
===Flashing [PPM]===
Erase : Processing rm721__11.40.ppm_v
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm721__11.40.ppm_v
Total writen 31 blocks
TIME : Write time : 00:00:15
PPM Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000
===Flashing [CNT]===
Erase : Processing rm721__11.40_006.image_v_telecom_vn_9g7x7
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm721__11.40_006.image_v_telecom_vn_9g7x7
Total writen 77 blocks
TIME : Write time : 00:00:39
CNT Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000
ADL: Close_Session
Content: 000300000000030000000300000000
ADL: Reboot
Flashing done!
Total flash time : 00:01:57
Reboot phone now...

best ko dk thì chuyển qua phoenix..múc cả bộ file xem có tiến triển gì ko

máy mình ko cài dc phonenix

Trích:

---

Được post bởi binhokls

máy mình ko cài dc phonenix

---

sao lại ko cài được lỗi gì bạn nói xem có giúp được gì ko

nó bắt down Microsoft .NET Framework Version.exe mình down về rồi mà vẫn ko cài dc

cài netdram 4. trở lên nhé bạn

ko được nửa thì xúc cứng