cần giúp 5230 báo " Phone start-up failed. Contact the retailer"

mình có con 5230 rm-588 khách nói đang dùng bình thường do là nó đi hackphone và hack gần xong thì mất điện và bây giờ bật nguồn lên báo:Phone start-up failed. Contact the retailer.được 1 lúc thì màn hình lịm đi rồi mất nguồn.đem qua phoenix và tool best thì ko cho chạy,báo lỗi.chạy bằng mx qua usb thì ko đồng bộ được.chạy qua usb hwk thì báo done nhưng not ok,chạy ver cao nhất(ver 51.9.2) =hwk xong thì ko lên nguồn,bật chỉ rung cái rồi tắt.ver hiện tại nó là 51.0.2.vậy bác nào đã từng gặp thì xin đk giúp đỡ.thanks ....

nhờ ai có atf xem log ra sao bạn!

Đổi thiết bị chạy rồi quăng cái log lên xem nào
Dễ banh tè le hết rồi

Trích:

---

Được post bởi TÚ CÒI

Đổi thiết bị chạy rồi quăng cái log lên xem nào
Dễ banh tè le hết rồi

---

nhà chỉ có mỗi hwk+mx .con này ko backup đk rpl và pm,cáp đa năng con này mình ko có và đây là log chạy = usb:
MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C084BFA5
Using device: USB Phonet and HTI, FW ver: 00.50, SN: 0101280E
Connection status: EHCI:HUB:USB 2.00 (High-speed)
Driver: nmwcdnsuc, ver: 7.1.32.84
Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012)
Phone detected in ADL mode, flash backup skipped.
Processing MCU file: RM-588_51.0.002_prd.core.C00
[BB5,XSR 1.6] size: 106.66 MB
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: E12659F
CMT SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
CMT EM0 ID: 00000296
CMT EM1 ID: 00000B22
CMT PUBLIC ID: 1D800105ADAF0052E1ACB39852FA7F8764B9E504
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT ROM ID: 4B9B75103E691FF8
Loading CMT secondary boot code
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 11.14.0 revision: 2.0 size: 0x3B80
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0400 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0040 - 0000 0231 [Samsung 2Gb DDP OneNAND,2 Gbits] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.5
Loading CMT update server data
Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 11.14.0 revision: 2.0 size: 0x8798F
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
Update server code loaded.
FUR: Adding Asic CMT as client OK.
CERT backup skipped due to protocol limitation.
CMT PAPUBKEYS is blank/erased.
Storing certificate [NPC, CCC, HWC, R&D] ...OK
Partitioning....
Partitioning complete
Erase size: 158.19 MB
CMT FLASH,MuxOneNAND area [00040000-00082FFF]
CMT FLASH,MuxOneNAND area [00083400-003FFFFF]
CMT FLASH,MuxOneNAND area [00400000-007FFFFF]
CMT FLASH,MuxOneNAND area [00800000-00D5FFFF]
CMT FLASH,MuxOneNAND area [00D60000-09E5FFFF]
Formating partition ...
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT PASUBTOC block sent
Selecting first CMT PAPUB block with matching RootKey.
CMT PAPUBKEYS: 7DC72D3F [RAP Certificate version] sent
CMT SOS*UPDAPP block sent
CMT SOS*ENO block sent
CMT SOS*DSP0 block sent
CMT SOS*ISASW block sent
CMT SOS+CORE block sent
CMT SOS+ROFS1 block sent
Programming completed in 1 min 39.110 s
Processing PPM file: RM-588_51.0.002_prd.rofs2.V20
[BB5,XSR 1.6] size: 17.83 MB
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Erase size: 33.50 MB
CMT FLASH,MuxOneNAND area [06FE0000-0915FFFF]
Flash programming ...
CMT SOS+ROFS2 block sent
Programming completed in 17.187 s
Processing PPM file: RM-588_51.0.002_C02_prd.rofs3.fpsx
[BB5,XSR 1.6] size: 6.37 MB
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Erase size: 13 MB
CMT FLASH,MuxOneNAND area [09160000-09E5FFFF]
Flash programming ...
CMT SOS+ROFS3 block sent
Programming completed in 6.172 s
Processing CNT file: RM-588_51.0.002_000_001_U001.uda.fpsx
[BB5,XSR 1.6] size: 18.56 MB
Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Erase size: 86.12 MB
CMT FLASH,MuxOneNAND area [09E60000-0F47FFFF]
Flash programming ...
Programming completed in 18.969 s
Total time for flashing process(boot+erase+write) was 2 min 36.000 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: E12659F
Waiting for USB device removal ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: E12659F
chạy được đến đoạn đó thì nó dừng

vào đây nhập nhập roduc code rồi load đúng code nó flash lại coi sao
http://www.mrcrab.net/Nokia-Product-Code.html

Trích:

---

Được post bởi duykhanh_gsm

vào đây nhập nhập roduc code rồi load đúng code nó flash lại coi sao
http://www.mrcrab.net/Nokia-Product-Code.html

---

mình đã chạy theo đúng Product-Code cao nhất là 51.0.2 rồi nhưng vẫn vậy....