7230 contact service

Bản in

28-10-2013, 17:52
hoanganht

7230 contact service

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 1], SN: C087AC4F
Using device: USB Phonet and HTI, FW ver: 00.50, SN: 000161EC
Connection status: UHCI:HUB::USB 2.00 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.75
Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000010000022600000001020C192102044100 [RAPS2 ver: PA 4.x]
CMT EM0 ID: 00001040
CMT EM1 ID: 00001030
CMT PUBLIC ID: 08300102D3D01049542F2BFB60165B786D52D8DE
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
CMT ROM ID: 67E82268F29CEA60
Loading CMT secondary boot code
SecondaryBoot: RAP3Gv40_2nd.fg [BB5] version: 11.14.0 revision: 3.0 size: 0x3AC0
Supported Ids: 0203192102004000, 020C192102004000, 0203192102024000, 020C192102024000, 020C192102004100, 0203192102004100, 020C192102014100, 0203192102014100, 020C192102014000, 0203192102014000, 020C192102034000, 0203192102034000, 0203192102024100, 020C192102024100, 0203192102034100, 020C192102034100, 0203192102054100, 020C192102054100, 0203192102044100, 020C192102044100
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0000 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 0098 0030 - 0000 0131 [Toshiba NAND-1G] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.6
Loading CMT update server data
Algorithm: RAP3Gv40_XSR17_alg.fg [XSR 1.6] version: 11.14.0 revision: 3.0 size: 0x91BD2
Supported Ids: 0203192102004000, 020C192102004000, 0203192102024000, 020C192102024000, 020C192102004100, 0203192102004100, 020C192102014100, 0203192102014100, 020C192102014000, 0203192102014000, 020C192102034000, 0203192102034000, 0203192102024100, 020C192102024100, 0203192102034100, 020C192102034100, 0203192102054100, 020C192102054100, 0203192102044100, 020C192102044100
Update server code loaded.
Waiting for USB device removal ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 2772F953
FUR: Adding Asic CMT as client OK.
CMT PAPUBKEYS HASH: 4431C834027BBA0D18A5ED745CAFA04BA679A74A
Selected firmware certificate matched.
Original Imei: 35825804523169
Original Product code: 059B1T3
Bluetooth ID: AC81F3EE0082
SIMLOCK PA identifier:
[0] PA_SIMLOC30

Reading CMT NPC (0x168 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
Reading CMT R&D (0x0 bytes).
Reading CMT MDM_KEYS (0x0 bytes).
Reading CMT PARTNERC (0x0 bytes).

Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 2772F953
Waiting for USB device removal ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 2772F953
Open device failed: FFFFFFFF (4) The system cannot open the file
Warning: Phone did not reboot to normal mode.
28-10-2013, 17:53
hoanganht

các bác xem hộ e con này bị sao với ạ.
đấy là log check bằng MX box.
28-10-2013, 17:59
hoanganht

máy đã qua cửa hàng khác rồi. khách nói lúc mang đi máy vẫn lên nguồn nghe gọi đc. cho người ta chạy xong bị vậy.
giờ bật nguồn lên nokia rồi chớp contact service
28-10-2013, 19:10
Trường_Mobile

đưa qua box khác không thì phoenix flash lại cho nó.đổi cáp khác thử xem
28-10-2013, 19:28
manhdung81mobile

bạn tháo camera ra chạy xem= cáp đa năng
28-10-2013, 19:54
duykhanh_gsm

quất cái ver đụng nóc lại coi sao ? nô ok liên hệ CH trước coi có backup dc pm ?
nếu k thì đi 1 cặp rồi ... mất simlock
28-10-2013, 22:19
hoanghau123456

Khách nói là một chuyện thôi. Vì nếu tự rưng không ai đem máy ra hiệu cả bạn ạ ! Bạn thử bằng phoenix hoặc beet tool xem bạn nhé ! Nếu không được thì phải kiếm fbus mới sử lý được bạn ạ ! log ở trên là bạn chạy USB phải không ?
29-10-2013, 09:48
hoanganht

em thử phoneix trước xong mí dùng mxbox. để e thử best tool vơi jaf.
khách nói là chạy sang tiếng việt thôi.
29-10-2013, 09:49
hoanganht

Trích:

Được post bởi manhdung81mobile

bạn tháo camera ra chạy xem= cáp đa năng

bác ơi con này chạy cáp đa năng chân nào vậy. e tìm hoài k thấy
29-10-2013, 09:50
hoanganht

Trích:

Được post bởi hoanghau123456

Khách nói là một chuyện thôi. Vì nếu tự rưng không ai đem máy ra hiệu cả bạn ạ ! Bạn thử bằng phoenix hoặc beet tool xem bạn nhé ! Nếu không được thì phải kiếm fbus mới sử lý được bạn ạ ! log ở trên là bạn chạy USB phải không ?

log này e chạy USB bác ạ.
29-10-2013, 10:06
hoanganht

e vừa chạy = best tôl nó k bi contac nữa mà lên nokia chớp trắng màn hình mấy lần rồi tắt
bác nào có cao kiến xin chỉ giúp
log best tool
DLL not found...
BB5 Easy Service Tool v1.14.1 (c) Infinity-Box Team Ready

Connect phone on selected interface...

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm598__10.82.mcusw
PPM : rm598__10.82.ppm_sp
CNT : rm604__10.82_010.image_sp_movi_es_v3_96902
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102044100
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 08300102D3D01049542F2BFB60165B786D52D8DE
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg Rev : 3.0 Ver : 12.2.0
Processing RAWLOADER...
FLIC : 00300098
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg Rev : 3.0 Ver : 12.2.0
Boot Done! :)
TIME : Boot time : 00:00:04
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 358258045231695
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : F:\Tool chay phan men nokia\Best Tool Infinity Crack\Backup\Cert\358258045231695_CRT.rpl

===Flashing [MCU]===
Erase : Processing rm598__10.82.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm598__10.82.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 135 blocks
TIME : Write time : 00:00:47
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm598__10.82.ppm_sp
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm598__10.82.ppm_sp
Total writen 29 blocks
TIME : Write time : 00:00:11
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm604__10.82_010.image_sp_movi_es_v3_96902
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing rm604__10.82_010.image_sp_movi_es_v3_96902
Total writen 77 blocks
TIME : Write time : 00:00:31
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:36
Reboot phone now...

-> Flashing Failed! :( Maybee HW error, or Downgrade try???!
Anyway - try reinsert battery and PowerUp phone manualy

Connect phone on selected interface...

Done!

Elapsed: 00:03:51
Connect phone on selected interface...

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm598__10.82.mcusw
PPM : rm598__10.82.ppm_sp
CNT : rm604__10.82_010.image_sp_movi_es_v3_96902
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102044100
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 08300102D3D01049542F2BFB60165B786D52D8DE
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg Rev : 3.0 Ver : 12.2.0
Processing RAWLOADER...
FLIC : 00300098
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg Rev : 3.0 Ver : 12.2.0
Boot Done! :)
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 358258045231695
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : F:\Tool chay phan men nokia\Best Tool Infinity Crack\Backup\Cert\358258045231695_CRT_2nd.rpl

===Flashing [MCU]===
Erase : Processing rm598__10.82.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm598__10.82.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 135 blocks
TIME : Write time : 00:00:49
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm598__10.82.ppm_sp
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm598__10.82.ppm_sp
Total writen 29 blocks
TIME : Write time : 00:00:12
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm604__10.82_010.image_sp_movi_es_v3_96902
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing rm604__10.82_010.image_sp_movi_es_v3_96902
Total writen 77 blocks
TIME : Write time : 00:00:32
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:40
Reboot phone now...

-> Flashing Failed! :( Maybee HW error, or Downgrade try???!
Anyway - try reinsert battery and PowerUp phone manualy

Connect phone on selected interface...

Done!

Elapsed: 00:03:50
Connect phone on selected interface...
29-10-2013, 10:12
A & T Mobile

chưa đồng bộ dk thì dính contacr là đúng rồi
dùng cáp đa năng hoặc ống lưng cho vào box chỉnh bsi rồi fláh lại xem có đồng bộ dk ko
29-10-2013, 10:18
hoanganht

Trích:

Được post bởi A & T Mobile $\"Xem$

chưa đồng bộ dk thì dính contacr là đúng rồi
dùng cáp đa năng hoặc ống lưng cho vào box chỉnh bsi rồi fláh lại xem có đồng bộ dk ko

t con này dùng cáp nào bác ơi. đa năng e tìm k thấy chân. ốp lưng e lại k có
29-10-2013, 10:27
A & T Mobile

Trích:

Được post bởi hoanganht

t con này dùng cáp nào bác ơi. đa năng e tìm k thấy chân. ốp lưng e lại k có

p kiếm cáp rồi kẹp theo hìnhn này xem
[IMG]http://i1.upanh.com/2013/1029/03//57949471.untitled.jpg[/IMG]
29-10-2013, 10:32
hoanganht

Trích:

Được post bởi A & T Mobile

p kiếm cáp rồi kẹp theo hìnhn này xem
[IMG]http://i1.upanh.com/2013/1029/03//57949471.untitled.jpg[/IMG]

thank bac . để e thử kiếm
30-10-2013, 10:19
HUNGMOBILE195

chuyen qua atf dung cap da nang.
30-10-2013, 10:21
HUNGMOBILE195

chac banh simlock roy.