asha 303 flash lỗi gì đây anh em?
log đây nè giờ khởi động chỉ lên trắng rồi tắt ah
card found: A1B5CCE8
registered to: CycloneBox
Connect phone on selected interface...
Core : v1.51 , FlashEngine : v1.8
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm763__14.87.mcusw
PPM : rm763__14.87.ppm_a1
CNT : rm763__14.87.image_a1_059J6N3
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
-> Phone not found.. :(
-> Boot fail...
Flashing failed...
Core : v1.51 , FlashEngine : v1.8
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm763__14.87.mcusw
PPM : rm763__14.87.ppm_a1
CNT : rm763__14.87.image_a1_059J6N3
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007400C192103032108
CPU ID : RAPU v21 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 862E0000FFFB3C404303CF25AFD202802978D324
ASIC MODE ID: 00
ROOT KEY HASH: 3AB5DB70B45D23F1ADEEBB5734160706
ROM ID: 2CAC45E23BC33C8B
Use RAPUv21_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv21_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : ACE39760399CD7A3FE439DCC52111C24D435D533
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 351665052906737
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\nokia\Backup\Cert\351665052906737_CRT.rpl
===Flashing [MCU]===
Erase : Processing rm763__14.87.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.87.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [ISA+EXTDRV]
Total writen 291 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000
===Flashing [PPM]===
Erase : Processing rm763__14.87.ppm_a1
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm763__14.87.ppm_a1
Total writen 57 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000
===Flashing [CNT]===
Erase : Processing rm763__14.87.image_a1_059J6N3
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm763__14.87.image_a1_059J6N3
Total writen 367 blocks
TIME : Write time : 00:00:05
CNT Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000
ADL: Close_Session
Content: 000300000000030000000300000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:16
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 303
Software Info: V 14.87 17-10-12 RM-763 (c) Nokia
IMEI: 351665052906737
PPM version : V 14.87 17-10-12 RM-763 (c) Nokia A1
Product code: 059J310
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
Error When resetting FullFactory :( ...
Error When setting User Data defaults :( ...
Error When resetting Product Tune :( ...
Error When resetting SW upgrade Default :( ...
Resetting LifeTimer
Error check LifeTimer Data, break :(
Probably - will not exist, before phone start :|
AfterFlash operations done ;D
Done!
Elapsed: 00:01:01
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
