xin dúp 3110c bật nguồn chớp tắt liên tục vài lần rồi tắt nguồn chậy jaf báo log

on 1.98.65 beta1
Detected PKEY: 9000B4CA
P-key nokia module version 01.02
Detected version: 01.B4, Driver version: 0, Library version: 0
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.31.0
Changing mode...Done!
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101001101
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 12F0011145137F563ECD264E8F0738FCD8DE3352
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 191EC665DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\UFS\rap3gv3_2nd.fg
Loader version: 01.10.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 89810089 <=> INTEL -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\UFS\RAP3Gv3_algo_fps8.fg
Loader version: 01.0C.05 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Done!
Restarting phone...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 07.21
05-11-08
RM-237
(c) Nokia.
HW version: 5008
PCI version:
RFIC version:  17211721
DSP version: 
ICPR61_08w10
PPM version: V 07.21
05-11-08
RM-237
(c) Nokia.
V
BT MCM version: 06cc-P9.1
Retu version: 32
Tahvo version: 53
Production serial number: MLH470771
Product code: 0552816
Module code: 0203291
Basic production code: 0542523
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 354206036510050
IMEI spare to net: 3A 45 02 06 63 15 00 05
IMEI SV to net: 33 45 02 06 63 15 00 25 F5

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-237.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0552816
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-237\

Searching for default location of ini...
Checking path: \Products\RM-237\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-237\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-237\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-237\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.ppm_v
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.image_v
APE Variant file: NONE
Languages in ppm: English,Chinese T,Vietnamese
Done!
Backing up CRT data...
Setting FLASH MODE
Loader version: 01.10.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 89810089 <=> INTEL -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\UFS\RAP3Gv3_algo_fps8.fg
Loader version: 01.0C.05 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Reading CMT NPC certificate...
NPC crt not available...
Reading CMT VARIANT certificate...
VARIANT CRT not available...
Reading CMT CCC certificate...
CCC not available...
Reading CMT HWC certificate...
HWC not available...
Saved to C:\Program Files\ODEON\JAF\ProgData\12345678901234_CRT_backup _74311.rpl
Backup CRT OK!
Backing up SIMLOCK data...
Setting local mode...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\354206036510050_CRT_backu p_74311.pm
Done!
Backup LCK OK!
Reading SW version...07.21
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101001101
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 12F0011145137F563ECD264E8F0738FCD8DE3352
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 191EC665DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\UFS\rap3gv3_2nd.fg
Loader version: 01.10.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 89810089 <=> INTEL -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\UFS\RAP3Gv3_algo_fps8.fg
Loader version: 01.0C.05 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 6 seconds...
Sending CRT data...
Error in RD cmd...
Error preparing flashing...
Backing up CRT data...
Setting FLASH MODE
Loader version: 01.10.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 89810089 <=> INTEL -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\UFS\RAP3Gv3_algo_fps8.fg
Loader version: 01.0C.05 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Reading CMT NPC certificate...
NPC crt not available...
Reading CMT VARIANT certificate...
VARIANT CRT not available...
Reading CMT CCC certificate...
CCC not available...
Reading CMT HWC certificate...
HWC not available...
Saved to C:\Program Files\ODEON\JAF\ProgData\12345678901234_CRT_backup _74411.rpl
Backup CRT OK!
Backing up SIMLOCK data...
Setting local mode...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\354206036510050_CRT_backu p_74411.pm
Done!
Backup LCK OK!
Reading SW version...07.21
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101001101
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 12F0011145137F563ECD264E8F0738FCD8DE3352
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 191EC665DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\UFS\rap3gv3_2nd.fg
Loader version: 01.10.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 89810089 <=> INTEL -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\UFS\RAP3Gv3_algo_fps8.fg
Loader version: 01.0C.05 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 6 seconds...
Sending CRT data...
Error in RD cmd...
Error preparing flashing...

thay cáp khác, nâng ver 7.30 hoặc chạy chế độ die USB đi bạn

Dòng flash INTEL chạy bằng UFS hơi chuối,lấy box JAF chạy đi anh

không thể chạy bằng usb được vì nó chớp 3 cái rồi tắt nguồn mà thử cáp rồi không biết còn cách nào khong ?
'

Trích:

---

Được post bởi nhuphanmobile

không thể chạy bằng usb được vì nó chớp 3 cái rồi tắt nguồn mà thử cáp rồi không biết còn cách nào khong ?
'

---

thế mới chạy chế độ Dead usb bằng tool jaf hay Phoenix cũng đc

mình thủ dùng JAF nhưng nó không kêt nối được với điện thoại usb chi chậy được khi có nguồn mà ? xinh dup

bạn chạy bằng jaf qua cổng usb flash ngọt luôn. mình làm mấy chú lên nguồn chớp trắng 3 lần rùi tắt dều ok lụm lúa.

nâng ver 7.30 đi bạn. ko được chạy bằng USB ở chế đọ die.

hướn dẩ dúp mình mình cắm cáp vào mà info nó không nhận không chạy được xin dúp

Trích:

---

Được post bởi nhuphanmobile

hướn dẩ dúp mình mình cắm cáp vào mà info nó không nhận không chạy được xin dúp

---

vào đây tham khảo http://saigonmobile.vn/forum/j-f/272...usb-o-jaf.html

thanks bạn mình thử đây

vấn dề nằm ở dây bạn à

CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

máy bị banh CONFIG KEY: 0000000000000000 bạn write vào thử có phải faild pm1 và pm 309 không 100% là như vây..nếu có mx_key sx4 phát là ok.vì sever auth sx4 của jaf bi dóng cửa rồi giờ ai củng xài mx_key hết giá khoảng 550-600/cái.xài tiện lắm free log dct4 nửa hii.

thanks bạn nhé mình đã làm thành công log nó đây F DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.29.0
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Fast phone flashing selected.
Fast phone flashing disabled.
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\

Searching for default location of ini...
Checking path: \Products\\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90007BF6
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.mcusw
PPM Flash file: C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.ppm_v
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.mcusw
PPM Flash file: C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.ppm_v
CNT Flash file: C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.image_ora_pl_games_128
APE Variant file: NONE
Backing up CRT...
Detected P-KEY: 90007BF6
P-key nokia module version 01.02
Init usb communication...
Failed to backup CRT...
Detected P-KEY: 90007BF6
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Not found!!!
Backing up CRT...
Detected P-KEY: 90007BF6
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
Failed! Aborting!
Failed to backup CRT...
Detected P-KEY: 90007BF6
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Error reading phone init data...
Backing up CRT...
Detected P-KEY: 90007BF6
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
Failed! Aborting!
Failed to backup CRT...
Detected P-KEY: 90007BF6
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 02.33.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting.......................................... .......................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 1520, APE blocks: 0
Erasing cmt...
Processing C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.mcusw...
Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
Erasing cmt zone 00020000 - 0007FFFF ... Erase result: 0000
Erasing cmt zone 00080000 - 000DFFFF ... Erase result: 0000
Erasing cmt zone 00100000 - 001FFFFF ... Erase result: 0000
Erasing cmt zone 00200000 - 0031FFFF ... Erase result: 0000
Erasing cmt zone 00320000 - 0105FFFF ... Erase result: 0000
Erasing cmt zone 01060000 - 01067FFF ... Erase result: 0000
Erasing cmt zone 01068000 - 0107FFFF ... Erase result: 0000
Processing C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.ppm_v...
Erasing cmt zone 01080000 - 0151FFFF ... Erase result: 0000
Processing C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.image_ora_pl_games_128...
Erasing cmt zone 01520000 - 01FDFFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.mcusw...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Sending CMT HASH for PMM_CONF
Sending CMT HASH for SBIF_CONF
Processing C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.ppm_v...
Processing C:\Documents and Settings\Admin\Desktop\3110c_7.30_TV_OK\3110c_TV_O K.image_ora_pl_games_128...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
Phone not found...
Second try...
MCUSW: V 07.30
07-05-09
RM-237
(c) Nokia.
APESW: (null)
VariantSW: (null)
Prodcode: 0552816
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 0 seconds...
Done!
DCT4/BB5 counter: 1
Done!

mình thanks mợi người

đấy, chạy 7.30 ok ngay mừ

Trích:

---

vấn dề nằm ở dây bạn à

CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

máy bị banh CONFIG KEY: 0000000000000000 bạn write vào thử có phải faild pm1 và pm 309 không 100% là như vây..nếu có mx_key sx4 phát là ok.vì sever auth sx4 của jaf bi dóng cửa rồi giờ ai củng xài mx_key hết giá khoảng 550-600/cái.xài tiện lắm free log dct4 nửa hii.

---

potay toàn nói lung tung. muốn chạy usb trên jaf bạn phải cài nokia pc suite nữa. nếu chạy mà không hết bạn tháo ic thẻ nhớ ra xem thử có hết không