5130 khởi động Nokia >> trắng màn hình rồi tắt

Trích:

---

Được post bởi HTFONE_KRONGPA

được chứ anh đánh dấu vào mục factory set luôn nha. nếu có cáp ốp lưng thì good hơn

---

em vừa chạy xong huynh à.Máy mất nguồn luôn rồi .giúp em với




JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: Can't read USB Cable Driver version!

Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.ppm_v
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.ppm_v
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.image_v_red
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 09.07.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting.......................................... .....................................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 1445, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.mcusw...
Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
Erasing cmt zone 00040000 - 000BFFFF ... Erase result: 0000
Erasing cmt zone 000C0000 - 0013FFFF ... Erase result: 0000
Erasing cmt zone 00140000 - 0137FFFF ... Erase result: 0000
Erasing cmt zone 01380000 - 0151FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.ppm_v...
Erasing cmt zone 01520000 - 01DBFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.image_v_red...
Erasing cmt zone 01DC0000 - 0215FFFF ... Erase result: 0000
Erasing cmt zone 02160000 - 03FBFFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.mcusw...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.ppm_v...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.image_v_red...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Setting test mode...
Failed! Aborting!
Done!

Các huynh xem giúp em Log này với , tình trạng máy ,khởi động lên Nokia >> trắng màn hình mất nguồn.E chạy Ver 7.91 not ok .Tiếp tục chạy 7.96 mất nguồn luôn ..hix.em chạy bằng USB





JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: Can't read USB Cable Driver version!

Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.ppm_v
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.ppm_v
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.image_v_red
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 09.07.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting.......................................... .....................................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 1445, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.mcusw...
Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
Erasing cmt zone 00040000 - 000BFFFF ... Erase result: 0000
Erasing cmt zone 000C0000 - 0013FFFF ... Erase result: 0000
Erasing cmt zone 00140000 - 0137FFFF ... Erase result: 0000
Erasing cmt zone 01380000 - 0151FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.ppm_v...
Erasing cmt zone 01520000 - 01DBFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.image_v_red...
Erasing cmt zone 01DC0000 - 0215FFFF ... Erase result: 0000
Erasing cmt zone 02160000 - 03FBFFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.mcusw...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.ppm_v...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-495\RM-495\5130 RM-495\7.96\rm495__07.96.image_v_red...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Setting test mode...
Failed! Aborting!
Done!

em ko biết phải bắt đầu từ đâu nữa .mong được ace 4r giúp đỡ

anh thử bỏ 2 dấu backup đi chạy lại xem có dc ko nhé rồi tính tiếp

bạn đang có những box gì
nếu jaf crack thì không ỗn rồi cho qua HWK chạy lại đi hoặc MXkey chạy ché độ USB sẽ ok hơn
nếu không có mxkey lấy tool phoenix crack về chạy USB
dowload phoenix http://www.4s.io/f/eLzXCmwb

kiếm cong cáp,va chọn file chuẩn cho qua mxkey ok

Trích:

---

Được post bởi ThanhHai_GSM

bạn đang có những box gì
nếu jaf crack thì không ỗn rồi cho qua HWK chạy lại đi hoặc MXkey chạy ché độ USB sẽ ok hơn
nếu không có mxkey lấy tool phoenix crack về chạy USB
dowload phoenix Phoenix_Service_Software_2010.12.11.42838_Cracked. exe - 4shared.com - chia sẻ và lưu trữ - tải xuống tập tin trực tuyến

---

cảm ơn huynh , em đang load về chạy thử.

Trích:

---

Được post bởi minhchienmobi

cảm ơn huynh , em đang load về chạy thử.

---

em load về rồi anh ơi. nhưng khi chọn File chạy thì phoenix báo : neither DP1.0 nor DP2.0 was found for the Product ,or the product cannot be identified . Vậy là bị làm sao anh ?.trình tự sử dụng em làm theo đúng link dưới
http://www.4shared.com/file/nPOrR7X0...g_phoenix.html

Dùng Navifirm down về cho chuẩn anh à

Trích:

---

Được post bởi trantukiet1008

Dùng Navifirm down về cho chuẩn anh à

---

ace nào có phoenix chuẩn cho em xin với .