UNLOCK 6131 = BB5BOX không được xin chỉ giáo
6131 chip spansion mình dùng BB5BOX làm trên 3 con nhưng không đc con nào hết,có thử ở VER 5.50 ,6.10 rồi .nó báo vậy nè
Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-115
Version: V_05.50_20-09-06_RM-115_(c)_Nokia.
IMEI: 359374006666412
SP LOCK status:
Config Key: 5050200000000000
Block 1: CLOSED Type 5 Data: 50502F
Block 2: CLOSED Type 5 Data: 50502F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Skip autobackup of PM 308
Autobackup file:
RM-115_359374006666412_Locked_Keycnt_0_Fbuscnt_0__V_0 5.50_20-09-06_RM-115_(c)_Nokia..bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest counters ...
Finded backup file: RM-115_359374006666412_Locked_Keycnt_0_Fbuscnt_0__V_0 5.50_20-09-06_RM-115_(c)_Nokia..bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 5050200000000000
Block 1: CLOSED Type 5 Data: 50502F
Block 2: CLOSED Type 5 Data: 50502F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try unlocking using keyboard codes ...
Try number (Keyboard): 1
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number (Keyboard): 2
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number (Keyboard): 3
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Unlock using keyboard codes fail.
Try unlocking using cable codes ...
Try number (Cable): 1
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number (Cable): 2
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number (Cable): 3
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number (Cable): 4
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number (Cable): 5
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number (Cable): 6
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number (Cable): 7
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number (Cable): 8
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number (Cable): 9
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number (Cable): 10
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Unlock using cable codes fail.
Reading again SP Locks ...
ERROR: 11160001
ERROR: 30020091
Xin các anh em chỉ giúp
