Update cyclonebox anh em vui long post ở đây nhé

Angry Cyclone Ioioio! FREE Blackberry Logger/Calculator, FREE DCT4 RPL for Asics 2,5,6,7,11
Hello, New update for Cyclone Box is Ready.

What is new?
- Blackberry Module added, support all latest 210 MEPs. Unlock is free, and uses server to calculate Unlock Codes.
- If Logger fails somehow, you might still use manual mode (if you know IMEI and MEP)
- All DCT4 RPLs are free now (Included ASICs: 2,5,6,7,11)
- Skin changed back to white one (too many users complained)
- Improved mode transition between Main/Boot (timeout increased)
- Fixed problem when upon adding "New Path" in "Paths" module Root directory was empty
- CBUS stack improved, if box is disconeected during work, it tries to connect it again instead of "CBUS ERROR"
- Minor changes and bugfixes

How it works?
1. Run Blackberry Module
2. Install drivers (skip this if done already)
3. Click "Read Phone"
4. Connect phone to computer
5. Unlock using calculated codes

Here is example BB8310 Unlocked by Cyclone:

Trích:

---

Waiting for new Blackberry USB Device (timeout 30 seconds)...
New device attached, checking if it's Blackberry...
Blackberry Found!
PIN: 208B60F9
Opened Channel "RIM CalTask", Proceeding...
IMEI: 358516020462712
HWV-16835-001-1
ASY-15714-005
MEP-06424-002
VSM-17713-001
CFG-10695-065
SFI-15771-033
APP-21301-001
Calculating Codes using Fetched Data...
Handling device: [Cyclone Team], [Cyclone Box]
Service Tag: 6F1079DB8ADD083018BB1FB147B8DEE6
Cyclone Server (1.0.0.598), Cyclone Box Team 2008, 2009, 2010 - Ready.

Please wait...
Codes received: 1
MEP-2 Code: 4910403860764705
All Done!

---

Where to download?
RapidShare: 1-CLICK Web hosting - Easy Filehosting

Please do not forget also to install Blackberry drivers! You can download latest drivers from here:
RapidShare: 1-CLICK Web hosting - Easy Filehosting

!!! CYCLONE - STOP ME IF YOU CAN !!!

Best Regards,

v01.38 Nokia Firmware is uploaded to server

Changes:
- Fixed problem when Nokia correct BB5 NCKs was calculated only for levels +1,+2,+3, codes +4,+5,+6,+7 was wrongly calculated due to memory leak of calculation routines.
- Minor (or non enveloped yet ) changes and bugfixes

This is server-side update only, don't ask for "exe" file because new "exe" is not released at moment, just use Maintenance Tool and upgrade your box.

Every box have 3 tries of upgrading firmware, please be patient during upgrade process because it may take some time and if you will cancel it (When software will act as a "hangup") you will lose upgrade logs and will need ask us for adding another credits...



Best Regards,
Cyclone Team

Hi to all
New Cyclone Box Installer, Firmware, Bootloader, is ready!
Most important changes:

=====================
Installer v1.07
30.06.2010
=====================





Maybe some movie, how to use it?
Youtube: YouTube - Cyclone Box used as Clip with latest addon

Where to get clip hardware?
You can ask any of Cyclone Box distributor/reseller.
Hardware is relative cheap - 15 usd (end-user price).
We will update clip soon with other functions.
It's first official Cyclone Addon.
Keep note it is CYCLONE ADDON, and same Clip Adaptor - it's just adaptor and still Cyclone Box is needed to work!

Where from download?
RapidShare: 1-CLICK Web hosting - Easy Filehosting

Please don't forget to upgrade box using new EXE file. New firmware v01.41 is needed to run latest Application.

Best Regards,
Stay Tuned,
Cyclone Team

Hi to all
New Cyclone Box Installer, Firmware, Bootloader, is ready!
Most important changes:

=====================
Installer v1.07
30.06.2010
=====================
- New FBUS Loaders v10.18.00 introduced (new protocol, for RAPIDO,RAPU,ST,etc)
- New FBUS Lodaers v10.16.00 introduced (old protocol, for RAPv3)
- Added support for Infineon X-Gold phones flashing. Phones supported: 1661 RH-111, RH-125, etc.
- XGold: Support for dead phones flashing
- XGold: Support for cross flash (we have tested 1616 flashing with 1800 firmware and seems works. Anyway YOU are responsible for any damages. Make sure PM is being backed-up before cross-flash. You also can't flash phones with difrent platform (i.e. RH111 <> RH125). Too diffrent CPU, LCD...,etc...)
- XGold: Supports bauds 115200,230400,460800,921600
- XGold: You don't need to know which phone is UPP or Infineon based. Just select model and Cyclone will detect it automaticly - wil select corect falshing method.
- XGold: Supports for changing phone PPM/CNT or/and MCU
- XGold: Support for latest 2010 PBL/EBL Loaders
- Added "Flash Language Only" checkbox for DCT4/XGold mobiles. Use only if MCU version installed in phone matches PPM/CNT version which going to be flashed.
- Cyclone Clip Diagnostic module added. This is used for testing additional Cyclone Hardware (Clip).
- Clip Module Added into Main Firmware. This is used only with "Cyclone Clip" hardware. Clip Features:
- Clip: Can unlock any DCT4+ phone within 2 secs (without PC)
- Clip: Can repair Contact Service (if caused by damaged simlock)
- Clip: Can Rebuild Simlock Area
- Clip: Can reset security code of most DCT4/BB5 phones
- Clip: Can reset security code bad attempts counter of most DCT4/BB5 phones
- Clip: 100% Safe, fast and easy to use
- You need have Clip Hardware to use Clip Funcionality. Clip is very simple hardware attached together with batery to Diagnostic Port (and box could be used as clip without PC). We will update clip later for other funcionality.
- New Secure Bootloader Agent v3.00 Released
- Added Dead Boot Recovery mode (in case to do "Boot Recovery" (just in case) smartcard MUST be removed to launch Recovery Mode!)
- New Secure Bootloader v2.12 have been released
- Bootloader: Added Clip Detection
- Bootloader: Fixed floating (blinking) "VBAT" port
- Bootloader: Added support for some new types of smartcard
- Bootloader: Improved startup time
- Bootloader: Improved security
- Bootloader: Minor changes and bugfixes
- Added new messages to NCK Phone Respond parsing (added "Too fast between tries" and "Not locked on given locklevel")
- The +4/5/6/7 BB5 NCK passwords are now calculated correctly (memory leak during code calculation)
- Message "This will consume XX credits" removed while taking DCT4 RPL as long as they are free .
- Blackberry IMEI Check fixed
- Added "Skip CMT ID Check" for some BB5 phones (if you are trying to flash alien files or NMP made some mistake during building FIASCO images)
- Added Warning confirmation before Writing Alien SD Keys
- Error while RSA unlocking DCT4 phones fixed (Error 0x02). Error have occured when used bad cable.
- Main Firmware v01.41 Released
- Box HW Rev A11E Added
- Minor changes and bugfixes

How to run "Clip Mode"?
1. Attach Clip Adapter to box "Diagnostic Port"
2. Connect Clip Adapter "USB" cable to box USB Input
3. Connect 9V battery to Clip Adapter
4. Connect phone to "Service Port"

How to use "Clip Mode"?
Once Clip Mode is run, you need use S1 Button to change it's mode.
Default clip mode is:
RED (slowly blinking) - read phone info via FBUS
other modes you can select pressing S1 button:
GREEN - Unlock/Repair simlock
BLUE - reset securitycode/sec.code attempts

Once correct mode is assigned, you need push S2 button. Needed action will be taken, and GREEEN (success) or RED(failed) led will blink fast afterall. Clip will be ready to service next phone/select other mode/etc.

Maybe some movie, how to use it?
Youtube: YouTube - Cyclone Box used as Clip with latest addon

Where to get clip hardware?
You can ask any of Cyclone Box distributor/reseller.
Hardware is relative cheap - 15 usd (end-user price).
We will update clip soon with other functions.
It's first official Cyclone Addon.
Keep note it is CYCLONE ADDON, and same Clip Adaptor - it's just adaptor and still Cyclone Box is needed to work!

Where from download?
RapidShare: 1-CLICK Web hosting - Easy Filehosting

Please don't forget to upgrade box using new EXE file. New firmware v01.41 is needed to run latest Application.

Hi, new Cyclone Firmware is uploaded on server.

- Fixed particular problems with handling new loaders (10.18.00), however if you still having problems with flashing phones using new protocol no need to make headache - we though about it and left old protocols untouched, so in case just make bugreport in our subsection and meanwhile you can flash your unit by ticking "Use Old Protocol Loaders".
- Minor changes and bugfixes

Every box have 3 update credits, please be patient during upgrade.
No need to upgrade EXE - bug was inside box fimware, not in EXE, so just use Box Maintenance and upgrade box microcode.

Best Regards,
Cyclone Team

Hi, new Cyclone Firmware is uploaded on server.

- Fixed particular problems with handling new loaders (10.18.00), however if you still having problems with flashing phones using new protocol no need to make headache - we though about it and left old protocols untouched, so in case just make bugreport in our subsection and meanwhile you can flash your unit by ticking "Use Old Protocol Loaders".
- Minor changes and bugfixes

Every box have 3 update credits, please be patient during upgrade.
No need to upgrade EXE - bug was inside box fimware, not in EXE, so just use Box Maintenance and upgrade box microcode.

Best Regards,
Cyclone Team

Hi, new Cyclone Firmware is uploaded on server.

- Fixed particular problems with handling new loaders (10.18.00), however if you still having problems with flashing phones using new protocol no need to make headache - we though about it and left old protocols untouched, so in case just make bug report in our subsection and meanwhile you can flash your unit by ticking "Use Old Protocol Loaders".

- Minor changes and bugfixes

NOTE :
Every box have 3 update credits, please be patient during upgrade.
No need to upgrade EXE - bug was inside box firmware, not in EXE, so just use Box Maintenance and upgrade box microcode.


If you get this error when update your box FW :

Quote:
Handling device: [Cyclone Team], [Cyclone Box]
Firmware: Cyclone Nokia Application v01.42, (Jul 5 2010 20:38:02, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2010 wk23
Boot Agent: Cyclone Secure BootAgent Server v3.00 (C) KarwosSoft 2010 wk25
Cyclone Server Send Command Error -> Code: 500, Not allowed to Upgrade Bootloader

Failed to Upgrade Bootloader -> Server Transaction Failed
Secure Bootloader Update Skipped, Not allowed or not needed Disconnected from Cyclone Server
Box Maintenance finished successfull
Dont worry, it is NO Problem, your Box FW is OK, you get the error because your Box bootloader is already up to date.

Hi!
New update for Cyclone Box is Ready.

What's new?

Code:

---

=====================
Installer v1.09
02.08.2010
=====================
- New BB5 Loaders v10.22.00 Introduced
- SL3 Unlocking added, uses server and credits, supported models:

- 2700 Classic (RM-561)
- 2730 Classic (RM-57
- 2730c-1b (RM-579)
- 2690c (RM-635)
- 3600 Slide (RM-352) v56.26 – v57.23
- 3720 Classic (RM-51
- 5130 XpressMusic (RM-495)
- 5310 XpressMusic (RM-303) v58.58 – v59.42
- 5730s (RM-465)
- 6300 (RM-217) v57.20
- 6303 Classic (RM-443)
- 6500 Slide (RM-240) v59.60
- 6500 Classic (RM-265) v59.45
- N97 (RM-505/506/507)
- N97 mini (RM-555)

- When using New Protocol flashing, software reminds about correct TX2 cable and yellow adapter
- Added Manual Mode to retrieve SL3 NCK if you dont have phone in hand (just enter IMEI when asked)
- Added "Erase NCK Codes" - this should be used when phones needs to be factory-relocked (best to use with SL3 if you want to clear entered NCK codes). Work with SL2 too. Simlock area is untouched when Relocking to factory state, and warranty will still be ok. Seems first software on market with such funcionality.
- Fixed BlackBerry calculation problems, old version never closed TCP connection after success or non-success calculation
- Firmware v1.46 Released, Added SL3 Routines
- Minor changes and bugfixes

---

Example SL3 unlocked by new update

Code:

---

BB5 Unlock Started...
MCU Version    V 07.95
MCU Date    03-02-10
Product        RM-495
Manufacturer    (c) Nokia           
IMEI        351538045311523
Mastercode    4612735731
Simlock Server    SIMLOCK SERVER
Simlock Key    2600300000000000
Simlock Profile    8000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: CLOSED    Type: MCC-MNC    Data: 26003F
Connecting to Cyclone Server...
Cyclone Server (1.0.0.632), Cyclone Box Team 2008, 2009, 2010 - Ready.
Checking job status...
Code Ready, Code: #pw+966057384237461+7#
Sending code via FBUS...
NCK[7] - ACCEPTED
Code Accepted! Unlocking Finished!

---

Where from download?
RapidShare: 1-CLICK Web hosting - Easy Filehosting

A firmware upgrade to v1.46 is needed to use this update!

Stay tuned,
Best Regards,
Cyclone Team

FAQ and important information about cyclone new update for SL3 unlock

Q : Is it stand alone salution or need internet connection?
A : Need internet connection.

Q : How much credits need to unlock one SL3 phone?
A : Need 50 cyclone credits to unlock one SL3 phone.

Q : How much time will take to unlock one SL3 phone?
A : Depends on how much server busy. maybe few minutes or maybe few days.

Q : do i need to update my box firmware to use this update?
A : Yes. upgrade to v1.46 is needed to use this update.

Q : Can we use usb cable for unlock?
A : NO. onlyy fbus cable supported.

Q : Can we reapir SL3 simlock cruppted phones with this update?
A : No. its not possible by any tool yet. only calculated rpl from nokia server is salution.

Q : Which SL3 phones are supported?
A : Bellow SL3 phones supported.

- 2700 Classic (RM-561)
- 2730 Classic (RM-57
- 2730c-1b (RM-579)
- 2690c (RM-635)
- 3600 Slide (RM-352) v56.26 – v57.23
- 3720 Classic (RM-51
- 5130 XpressMusic (RM-495)
- 5310 XpressMusic (RM-303) v58.58 – v59.42
- 5730s (RM-465)
- 6300 (RM-217) v57.20
- 6303 Classic (RM-443)
- 6500 Slide (RM-240) v59.60
- 6500 Classic (RM-265) v59.45
- N97 (RM-505/506/507)
- N97 mini (RM-555)

Q : Which providers are supported?
A : All providers of above models.

Q : From where i can download new cyclone installer?
A : Here is direct links for new installer

DOWNLOAD

ALL LATEST PHONES WITH NEW SECURITY ARE SUPPORTED NOW WITH CYCLONE BOX (BY IMEI AND CABLE)

HERE IS THE LIST OF SUPPORTED MEPS


MEP-16826-001
MEP-17232-001
MEP-17490-001
MEP-17568-002
MEP-18601-001
MEP-18637-001
MEP-10073-001
MEP-10129-001
MEP-10129-002
MEP-10129-003
MEP-10129-004
MEP-10129-005
MEP-11016-001
MEP-11139-001
MEP-11139-002
MEP-11139-003
MEP-11139-004
MEP-11139-005
MEP-04103-001
MEP-04103-002
MEP-04103-004
MEP-04104-003
MEP-04104-004
MEP-04104-005
MEP-04104-006
MEP-04104-007
MEP-04546-001
MEP-04598-003
MEP-04598-004
MEP-04598-005
MEP-04626-001
MEP-04626-002
MEP-04938-001
MEP-04938-002
MEP-05277-001
MEP-05277-002
MEP-05277-004
MEP-05277-005
MEP-06041-001
MEP-06041-003
MEP-06041-004
MEP-06041-005
MEP-06041-006
MEP-06041-007
MEP-06041-008
MEP-06041-009
MEP-06041-010
MEP-06068-001
MEP-06068-002
MEP-06259-002
MEP-06259-003
MEP-06423-001
MEP-06424-001
MEP-06424-002
MEP-06529-001
MEP-06529-002
MEP-06530-001
MEP-06530-002
MEP-06810-002
MEP-06811-003
MEP-06812-001
MEP-06812-003
MEP-06812-004
MEP-06813-001
MEP-06813-002
MEP-06814-001
MEP-06814-002
MEP-06814-004
MEP-06814-005
MEP-06849-001
MEP-06849-002
MEP-06893-001
MEP-06899-001
MEP-06899-002
MEP-07321-002
MEP-07484-001
MEP-07484-002
MEP-07484-003
MEP-07484-004
MEP-07484-005
MEP-07484-006
MEP-07484-007
MEP-07705-002
MEP-07705-003
MEP-07722-001
MEP-07722-002
MEP-07722-003
MEP-07723-001
MEP-07723-003
MEP-07723-004
MEP-07723-005
MEP-07723-006
MEP-07723-007
MEP-07754-001
MEP-08209-001
MEP-08209-002
MEP-08209-003
MEP-08318-001
MEP-08395-001
MEP-08448-001
MEP-08448-002
MEP-08589-001
MEP-08881-001
MEP-08882-001
MEP-08918-001
MEP-09004-001
MEP-09070-001
MEP-09149-001
MEP-09292-001
MEP-09292-002
MEP-09292-003
MEP-09292-004
MEP-09292-005
MEP-09293-001
MEP-09625-001
MEP-09667-001
MEP-09690-001
MEP-09747-001
MEP-09783-002
MEP-09783-003
MEP-09821-001
MEP-09821-002
MEP-09821-003
MEP-09917-001
MEP-09938-001
MEP-11139-006
MEP-11246-001
MEP-11246-002
MEP-11414-001
MEP-11414-002
MEP-11534-002
MEP-11534-004
MEP-11534-005
MEP-11534-006
MEP-11534-007
MEP-11534-008
MEP-12186-001
MEP-12209-003
MEP-12209-004
MEP-12209-006
MEP-12209-007
MEP-12209-008
MEP-12488-001
MEP-12565-001
MEP-12579-001
MEP-12579-002
MEP-12599-003
MEP-12622-002
MEP-12907-002
MEP-12978-001
MEP-12980-001
MEP-12980-002
MEP-13188-001
MEP-13188-002
MEP-13188-006
MEP-13188-007
MEP-13188-008
MEP-13188-010
MEP-13710-001
MEP-13928-001
MEP-13928-002
MEP-13988-001
MEP-13990-001
MEP-14052-001
MEP-14052-002
MEP-14074-001
MEP-14074-002
MEP-14074-003
MEP-14150-001
MEP-14260-001
MEP-14260-002
MEP-14896-001
MEP-14896-002
MEP-14896-003
MEP-14896-004
MEP-14896-005
MEP-15159-001
MEP-15159-002
MEP-15326-001
MEP-15326-002
MEP-15343-001
MEP-16272-002
MEP-16272-003
MEP-16272-005
MEP-16352-001
MEP-16419-001
MEP-16472-001
MEP-19322-003
MEP-19877-001
MEP-20099-002
MEP-20099-004
MEP-20099-009
MEP-20166-001
MEP-20454-001
MEP-20669-001
MEP-21545-001
MEP-21878-001
MEP-22793-001
MEP-23361-001
MEP-24124-001
MEP-24409-002
MEP-24660-001
MEP-24667-001
MEP-24667-002
MEP-24723-001
MEP-24723-002
MEP-26594-001
MEP-26900-003
MEP-27488-001
MEP-27501-003
MEP-28240-002
MEP-28364-001
MEP-28555-001
MEP-29080-002
MEP-29318-001
MEP-30218-001
MEP-30218-002
MEP-30638-001
MEP-30669-001
MEP-31845-001
MEP-33006-002

NOTE : This is sever side update , you dont have to download or do anything



br
CycloneBox Team