Cyclone Box Firmware v01.66 Released
Hi, this is server-side update only, upgrade your box using Box Maintenance.
- MEP-31845-002 - added
- MEP-41261-001 - added
- MEP-42517-001 - added
- MEP-08589-001 - fixed NCK length
- Changed default SX4 Emulation Serial Number due to blacklist by Nokia in latest PA_SD. Now SX4 serial is calculated using box unique OTP Area, so quite randomfull and further blacklist not possible too.
- Minor Changes and bugfixes
Best regards N Stay Tuned,
Cyclone Team
Hi, new firmware for Cyclone Box is ready.[/COLOR]
Signature: Cyclone Nokia/Blackberry Application v01.71, (Sep 11 2011 17:49:29, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
What's new ?
- MEP-04104-008 added
- MEP-42490-002 added
- Optimizations in TX2 data shifting
- Fixed problems with resuming device from Static (sleep) mode on some configurations
- Fixed some variants of JCOP31 handling
- Minor changes and bugfixes
This is server-side update only, just do Box Maintenance and your box will be updated. Keep note that new major installer is still not ready yet (many internal changes related to engine, etc), however it should be ready within next week, so be prepared http://forum.gsmhosting.com/ubb/wink.gif
Best Regards,
Cyclone Team
CycloneBox Installer v1.16 (Black Edition)
MAJOR FUNCTIONS ADDED
- New BB5 FBUS/USB Loaders v11.24.00 Introduced
- Added Dead USB Flashing for RAPIDO and other FUR-over-USB operations (DO NOT USE FOR CERTIFICATE READ/WRITE!), still "old method" avaiable in connection tab.
- Certificates operations for Rapido FBUS-OVER-USB disabled, because is not supported by loaders ( it will fail without any attempt )
- Rapido Alive FUR-over-USB flashing not supported, flash those phones by Dead variant instead (Switch to RAW mode problem in this models..), or "Old USB Flashing Method"
- "Use OLD USB FLASHING METHOD" moved to BB5/Flashing tab
- "Settings" tab renamed to Connection
- TX2 settings removed from BB5 Flashing Tab
- RAPU Flashing/Booting Improved
- C2-02 XGold2 Flashing "Added" Cyclone has flashing compatibilty for this model, but MassMemory file couldn't be handled becasue too big. Fixed.
- BB5 Mass Memory Flashing Tested Cyclone SW has this posibility from long time ago...
- Added "Read Unique Data" button. Use to boot phone by Flashbus directly, and dump Unique Data (for Simlock,SD,...) when phone doesn't have correct BSI resistors value. Dumped unique data might be lately used for USB operations if still FBUS operations fails.
- Old DCT4 Asic 2,5,6,7 Direct Unlock/Relock/Autolock Introduced, finally
- Standalone DCT4 RPL Calculation Introduced, supported Asics: 2,5,6,7,11
- Added support for DCT4 (7250i, 6610i, 2125i, 2865i, 6275i) Product Data RPL Entity Writing for fixing CS
- Added support for generating extended DCT4 RPL with Product Data for above models (CS problems)
- Alcatel Calculator added to gui
- PMM Protection Checkbox added upon PM write. Use to protect PM security fields.
- Diagnostic Module Added
- Selftests moved to new "Diagnostic" module
- Vibra Tests Added
- Backlight Tests Added
- "Autodetect" added for DCT4 Unlocking. Unique method non ASIC dependand (i.e. avoids RM-189 2310 problems avaiable on all boxes right now). If there is problems with autodetection user still can select unlocking method manually.
- Removed DCT4 ASK-RPL From Credits Manager
- Removed SuperDCT4 Activation from Credits Manager
- StatusBar messages are more accurate now
- Added "Auto-Rebuild IMEI" checkbox for "Read UEM IMEI" function. Used to automatically generate FLASH IMEI DATA and programm it one-click REPAIR ??????????????4.
- CacheV2 Introduced
- XGold1/2 Flashing Routines rewritten to be more memory effective
- Dead-erased XGold2 flashing improved, plus added some messages regarding to reviving dead XG2
- USB Connection Type is now selected automatically when XGold2 platform found
- The supported MEP List are now acquired from box once Blackberry Tool launch
- Moved UEM stuff to new "ASK/RPL Tool"
- XGold2 MassMemory flashing added
- Remaining XGold Credits are now shown upon launching of Nokia Tool (Those one used for XGold1 LBF, Blackberry Codes Service, etc)
- Default Security Area XGold Service count increased from 50 to 100 (100 phones limit between SA updates for Blackerry,XGold1,...)
- XGold/Blackberry service is now also checked upon Blackberry tool startup, also after each Code calculation remaining Calculation Limit is displayed
- Relock files updated for DCT4
- AutoUpdater Introduced
- USB Flashing Solved due to wrongly installed Flashing Cable Drivers on some configurations (i.e. Virgin PC)
- Database Unlock Introduced
- RPL Write revised
- PARTNERC certificate support added for Certificate Read
- PARTNERC certificate support added for Certificate Write
- PARTNERC certificate support addef for RPL Operations
- Erase files support added
- DCC configuration for NIMMIIIIRRFF06150000 added
- DCC configuration for NIMMIIIIRRFF095A1F05 added
- DCC configuration for NIMMIIIIRRFF095A1F04 added
- DCC configuration for NI00IIIIRR0306150018 added
- DCC configuration for NIMMIIIIRRFF095B1F05 added
- DCC configuration for NIMMIIIIRRFF0102F201 added
- DCC configuration for ISL2TI0200000103B840 added
- DCC configuration for 8600030001040A021001 added
- DCC configuration for 860003000104094B2F01 added
- DCC configuration for 86000300010401035424 added
- DCC configuration for NI00BC000003095B1F00 added
- DCC configuration for NI00BC0000030102F203 added
- DCC configuration for NI00BC0000030102F202 added
- DCC configuration for NI00BC000003095B1F05 added
- DCC configuration for NI00BC000003095B1F01 added
- DCC configuration for NI00IIIIRR030C213402 added
- DCC configuration for NI00IIIIRR030C213401 added
- DCC configuration for NI00IIIIRR030C20C605 added
- DCC configuration for NI00IIIIRR03094B2F01 added
- DCC configuration for NI00IIIIRR0301022E05 added
- DCC configuration for NI00IIIIRR0301022E01 added
- DCC configuration for NIMMIIIIRRFF0C206C02 added
- DCC configuration for NI00IIIIRR0301035602 added
- DCC configuration for NI00CS0000040C213402 added
- DCC configuration for NI00CS00000401022E05 added
- DCC configuration for NI00BC0000040F03F802 added
- DCC configuration for NI00BC0000040A4E2000 added
- DCC configuration for NI00BC000004095B1F01 added
- DCC configuration for NI00BC000004095B1F00 added
- DCC configuration for NI00BC0000040103B904 added
- DCC configuration for NI00BC0000040102F201 added
- DCC configuration for NI00BC00000401022C00 added
- DCC configuration for 0A4E2007 added
- DCC configuration for 0103B904 added
- SX4 Virgin PMs database updated, added RM-256, RM-497, RM-528V, RM-584, RM-586, RM-609, RM-612, RM-626, RM-638, RM-707, RM-712
- HWC/CCC Templates added for products RM-469, RM-540, RM-566, RM-528V, RM-596, RM-609, RM-614, RM-645
- Models.ini refreshed
- Skin Stack Updated
- Previous updates included
- Nokia Connectivity Cable Drivers updated to v7.1.42.0
- Box Firmware v01.73 Released
BUG FIXES & IMPROVEMENTS
- Afterwards DCT4 Erase All chips, the Permanent Data aren't restored anymore
- Fixed DCT4 RPL Write problem when only DATA2 exists in RPL file
- Fixed problems with handling RAPIDO > v11.16.00 loaders over FBUS (FUR control Add Problem)
- Check flashing Bus for WD2 fixed
- Read UEM Imei for WD2 Fixed
- Read ASK for WD2 Fixed
- Write RPL for WD2 Fixed
- Fixed lots of Access Violatios after closing up Nokia Tool
- Fixed bug with disappearing Tray icon after Minimize to Tray
- Bruteforce between NCK Fixed
- PM Write bugs fixed (Access Violation)
- Fixed bug with Broadcom Read Info
- Fixed spurious XGold2 product to be displayed in XGold1/DCT4 tab
- Fixed product mismatch on XG1/XG2 autodetection
- Fixed invalid Calculation of Mastercode
- 6230 Flashing Fixed (Given Image not maches with readen UPP Id or Image problem). If problem still exists select all flashing files _MANUALLY_ don't use INI based (because there exists two HW versions E and M autoselection is HWID based and may fails anytime).
- OMAP Loaders Fixed
- Fixed some wrong FBUS implementation when Packet size mod 0x78 == 0
Downloads
LINK1
LINK2
LINK3
Still more to come so stay tune ;)
Best Regards,
Cyclone Team
Hi, new update for Cyclone Box BlackBerry Module is ready.
Added support for following MEPs:
MEP-06041-012
MEP-06041-013
MEP-14074-004
MEP-29080-003
MEP-34870-002
NOTE
Just update your box using Box Maintenance. Each box having 3 update credits.
Still alot more to come so stay tune ;)
Best Regards,
Cyclone Team
:cool::cool:
Hi, new firmware for Cyclone Box is just uploaded at server.
What's new?
- MEP-10129-006 added
- MEP-04626-001 fixed length
- MEP-06529-001 fixed length
- MEP-06529-002 fixed length
- MEP-06530-001 fixed length
- MEP-06530-002 fixed length
- MEP-07321-002 fixed length
- MEP-07723-001 fixed length
- MEP-08881-001 fixed length
- MEP-08882-001 fixed length
- MEP-09292-001 fixed length
- MEP-10073-001 fixed length
- MEP-18601-001 fixed length
- MEP-19877-001 fixed length
- MEP-24660-001 fixed length
- MEP-30218-001 fixed length
Update your box using box maintenance.
Best Regards,
Cyclone Box team
Hi,
Back Again
new firmware for Cyclone Box is just uploaded at server.
Added support for Blackberry MEP-29318-002. (248 MEPs Total)
Best Regards,
Cyclone Team
Hi, latest bomb for Cyclone Box is ready
Update is 100% free and standalone for CycloneBox users;-)
- Added FIRST IN THE WORLD, FREE, STANDALONE SL3 UNLOCK by BF FOR LATEST TI BASED NOKIA PRODUCTS (RAPUV2 CPU) this includes Nokia 500, Nokia 600, Nokia 700, Nokia 701 and probably more coming !!!!!! These products are 15 NCK chars so not to worry.
- Added FIRST IN THE WORLD, FREE, STANDALONE SUPERDONGLE REPAIR for RAPUv2 Based Phones
- Added FIRST IN THE WORLD, FREE, STANDALONE SX4 AUTHORIZATION for RAPUv2 Based Phones
- Added FIRST IN THE WORLD, FREE, STANDALONE "FULL RPL" BACKUP (include SUPERDONGLE) for latest RAPUv2 phones
- Added FIRST IN THE WORLD, FREE, STANADLONE DOWNGRADE CAPABILITY for latest RAPUv2 phones
- Added FIRST IN THE WORLD, FREE, STANDALONE Full Security analysis for RAPUv2 phones
- Supported interfaces: USB and FBUS
- Small bug fixes, i.e. PM protection is now unticked by default
Nokia 701, reading sl3 log file
Nk701 detailed security analysisCode:[Nokia USB Phonet]: Port opened OK!
Reading SL3 LOG File...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 79u_11w31.4
MCU Date 16-08-11
Product RM-774 (Nokia 701)
Manufacturer (c) Nokia
IMEI 358272040230347
Mastercode 752474040
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
WARNING: "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 3BC33C8B
CMT Ready!
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.16.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC006000000032, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.07 (C) 2011 KarwosLabs
Custom loader running OK! Working...
If phone doesn't powering into Local Mode now for some reason do following:
1. Re-insert battery
2. Power it on, when asked use Ovi/Pc Suite Mode
Readed OK, Saving to "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC "
Success!
Nk 701, full RPLCode:Started Phone Security Analysis...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 79u_11w31.4
MCU Date 16-08-11
Product RM-774 (Nokia 701)
Manufacturer (c) Nokia
IMEI 358272040230347
Mastercode 752474040
Reading Security Block...
Security block OK and saved to "RM-774_358272040230347_2011-10-04_022815.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
"EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!
Standalone SX4 operationCode:RPL Creation started...
Processing CMT Part...
[Nokia USB Phonet]: Port opened OK!
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-774_358272040230347_2011-10-04_022831.SecurityBlock.PM"
"EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Exists, That is good...
Storing Additional Data...
Checking Superdongle Key...
Encrypting Superdongle Key...
Storing Superdongle Key...
Checking CMLA Key...
Storing CMLA Key...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 3BC33C8B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.24.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC006000000032, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0060 (Samsung), Size: 1024MBytes, VPP: Not Supported
RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.24.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FEB3BB7481D3E5D0EAC907335A4402A071493D53
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
Storing PARTNERC...
Restarting MCU...
RPL Saved OK
Copying our loaders will affect in cracks/clones in market shortly and maybe Broadcom Unlocking business destroy.Code:SX4 Authorization / SD Repair Procedure Started....
[Nokia USB Phonet]: Port opened OK!
"EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Exists, That is good...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 79u_11w31.4
MCU Date 16-08-11
Product RM-774 (Nokia 701)
Manufacturer (c) Nokia
IMEI 358272040230347
Mastercode 752474040
Reading Security Block...
Security block OK and saved to "RM-774_358272040230347_2011-10-04_022851.SecurityBlock.PM"
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button
At least firmware 1.74 needed (update isn't needed at all).
Don't forget to have installed latest v1.16 installer (http://www.karwos.hk/CycloneBoxInstaller.exe), so Autoupdate module will do the job.
Best Regards,
Cyclone Team
Hi, firmware v01.77 was just loaded to server.
Added new Blackberry MEP-175683-003 (MTS Moscow, North-West GSM, KB Impuls BeeLine) and
Added free SuperBB5 (sl3direct) routines.
STAY TUNED.
Best Regards,
Cyclone Team
Cyclone Box v1.0.0.11671 Released
Hi, new update is released.
- Added PA_SIMLOC30 Original Nokia RPL Write support in SIMLOCK2 format
- The NCK length is now automatically recognized upon RPL write, so correct NCK array lenght might be assumed
- Minor changes and bugfixes
Autoupdate should do the job, in case of any problems (or interrupted update) you can manually download exe from http://www.karwos.hk/updater/Cyclone.exe and place in C:\Program Files\Cyclone Box\
Best Regards,
Cyclone Team http://forum.gsmhosting.com/ubb/cool.gif
Hi, new firmware v01.78 was just loaded at server.
What's new?
- Added support for Blackberry MEP-06041-016, WORLD'S FIRST
- Added support for Blackberry MEP-42490-001, WORLD'S FIRST
Upgrade your box using Box Maintenance and Enjoy ;-)
More to come,
Best Regards,
Cyclone Box Team
CycloneBox Firmware 01.79 Firmware is Ready on server
Added Latest BlackBerry Security Mep
-MEP-06041-017 (Worlds First)
Update your Box from Maintenance tool
PS
We know that you guys are waiting for something ,So we will be back again in few hours ;)
Stay Tune
br
Cyclone Box team
Cyclone Box Broadcom Unlocker Released
Hi, new update for Cyclone Box is ready.
Added support for reading Unique Data files for Broadcom 21351 based Nokia Phones (X2, C3, .. and more of them).
After read Unique Data you can:
- Unlock SP locks by reading LBF data
- Backup FULL RPL (including superdonlge) 100% Nokia-Like
- Repair corrupted Superdongle keys
- Authorize your phone with SX4 emulation inside box
- Detailed Security Analysis
- Downgrade this phones
- More ...
X2 Example Uni Data read and Security operation
Quote:PS1: Server connection and 10 credits (with 100 credits threshold) required to perform Broadcom Uni Data dump.Trích:
Started Phone Security Analysis...
[Nokia X2-00 USB Phonet]: Port opened OK!
MCU Version V 04.90
MCU Date 28-09-10
Product RM-618 (Nokia X2-00)
Manufacturer (c) Nokia
IMEI 352699049966024
Mastercode 554352325
Reading Security Block...
Security block OK and saved to "RM-618_352699049966024_2011-11-12_132245.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
WARNING: "48400406073ECC4443B83B4151F972ABA08B3D66.C000 3160 " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia X2-00 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
New ROM Detected
CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000
CMT_EM_ASIC_ID: 00005361
CMT_PUBLIC_ID: 48400406073ECC4443B83B4151F972ABA08B3D66
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT_BOOT_ROM_CRC: DE56D582
CMT_SECURE_ROM_CRC: BDDE7A3A
CMT Ready!
BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.11.24.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020003000000131, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020003000000131, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.07 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Cyclone Server (1.0.0.676), Cyclone Box Team 2008-2011 - Ready.
If phone doesn't powering into Local Mode now for some reason do following:
1. Re-insert battery
2. Power it on, when asked use Ovi/Pc Suite Mode
Readed OK, Saving to "48400406073ECC4443B83B4151F972ABA08B3D66.C000 3160 "
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!
PS2: After reading uni data, all operations is standalone (just likely previous basing upon cached data)
PS3: Server charged credits, but my phone got disconnected during hash read operation, and hash not readen. What to do, what to do? If your account has been charged, the data generated at server are cached too... That means you can repeat process again (previously charging battery, i.e.), server transaction will be succeeded and no credits charged.
Box firmware v01.82 is required to use this update.
Software and loaders should be automatically updated.
In case if you have aborted your update process, and now having problem with running app - you can download http://www.karwos.hk/updater/Cyclone.exe and place it in your Cyclone directory...
MORE COMING !!!
Best Regards,
Cyclone Box Team
Cyclone Box FREE and STANDALONE Broadcom Hash Read
Broadcom Unlocking (via LBF Hash Read)/SX4 Authorization/SD Repair/etc is now fully FREE and STANDALONE, just simply as previous models.
No internet connection and credits needed.
Just to remind Cyclone is one box which support all of hashes free and standalone now, this includes reading data from RAP3Gv3, RAP3Gv4, RAPUv1, RAPUv21 (world's first), Broadcom, XGold1, and shortly from XGold2 (maybe free, maybe with credits, we'll decide).
No firmware upgrade is needed. Just run Cyclone and it will auto-update main exe + loaders.
Make sure you have latest installer installed, if not, grab one from http://www.karwos.hk/CycloneBoxInstaller.exe
Firmware required, v01.82 (from Nov 12), no upgrade needed if u have one already.
Best Regards,
Cyclone Box Team http://forum.gsmhosting.com/ubb/cool.gifhttp://forum.gsmhosting.com/ubb/cool.gifhttp://forum.gsmhosting.com/ubb/cool.gif
=====================
Installer v1.17
20.12.2011
=====================
- SE Xperia Unlocker introduced (this is 3rd party addon)
Supported Phones :
Xperia X10 Mini - E10i
Xperia X10 Mini Pro - U20
Xperia X8 - E15i
Xperia W8 - E16 - E16i
Xperia X10
Xperia X10i
Xperia X10a
Docomo SO-01B
All These Phones supported without TEST POINT
- Added Real time SE Xperia Unlocker account Creator in 'Credits' tool.
(This is the best option for Online web shop resellers as Addon works without Box)Reseller can generate accounts real time with box)
10 Cyclone credits = 1 Xperia phone log
- BB5 FBUS/USB Loaders v11.40.00 Introduced
- Introduced previous updates (standalone and free Broadcom unlocking, RAPUv21, etc)
- PM Protection is now unticked by default
- PM Protection is automatically unticked during SX4 operations
- Full Erase for New Protocol APE phones fixed (wrong CMT Flash Device Index selected)
-Added New bright skin
- Minor changes and Bugfixes
Download Links
http://www.karwos.hk/CycloneBoxInstaller.exe
Multiupload.com - upload your files to multiple file hosting sites!
Discussion thread
21-12-2011 CycloneBox Installer v1.17 with Xperia Addon and more
br
CycloneBox Team
Cyclone box Firmware version 1.83 2 meps 2012 added world first [Reposted]
Cyclone Box Firmware v01.83 Released
Hi, new firmware is uploaded to server, no need download nothing, just upgrade your box by "box maintenance"
Added 2 World's First MEPs:
MEP-09917-003
MEP-46976-002
Enjoy Cyclonebox,
more to come,
Cyclonebox Team
Cyclone Bomb, Nokia X1-00 / X1-01 Unlock Added Hi, new update for Cyclone Box is released.
What's new?
- Added support for LBF data read for new XGold110 based phones, this is X1-00, X1-01, absolutly WORLD FIRST
- Nokia X1-00, X1-01, 100, 101, 102 flashing added
- 20 Digits is now checked upon XGold1xx Hash Read, as users reported 20 digit phones (i.e. new 1616 from Yoigo Spain). The 20 digits phones will not be readed now, to not loss the computation power of SL3 Clusters.
- When 20 Digits NCK is found upon BB5 LBF read, operation will be canceled (previously - asked whether to continue, or not), same reason as up
- Minor changes and bugfixes
How to update?
Just run Cyclone, autoupdate will replace Cyclone.exe.
Join us on facebook: Cyclone Box | Facebook
More to come,
Best Regards,
Cyclone Box Team
Hi to all! New BOMB Update for Cyclone Box is ready Again!!
What's new ??
- Added support for unlock by LBF read for latest XGold113 Nokia Phones, this is Nokia 100, 101, 102, again WORLD FIRST
- Latest XGold110/113 phones is also supported to full RPL Read (IMEI + Simlock), so afterwards Simlock or IMEI could be fully restored - world's first too... Using RPL method also Keypad/FBUS counter might be resetted.
- Added support for Profile Bits analyze upon LBF dump for XGold1xx, so phones which will not accept code via neither keypad or FBUS handler - Log file will not be readen
- Minor changes and bugfixes
How to update?
1. Run Cyclone Box Software, and autoupdate module will download necessary files. On failure, you can download new exe manually from http://www.karwos.hk/updater/Cyclone.exe and place it at C:\Program Files\Cyclone Box
2. Also Firmware v01.85 is Required. Update your box via Box Maintenance, or just agree upon first Nokia Tool launch.
Join us on facebook: Cyclone Box | Facebook
Best Regards,
Cyclone Box Team
More to come...
Hi, new firmware v 01.87 for Cyclone Box was just uploaded at server.
Added new security MEP-12209-010 WORLD FIRST
Just upgrade your box via Box Maintenance and enjoy.
Join us on facebook: Cyclone Box | Facebook
More to come,
best regards,
Cyclone Team
Hi, new update for Cyclone Box is released.
Added hash reading for LBF for XGold213 based phones. Operation is free, quick and standalone.
And now best, you don't need to know phone CPU platform. Just select USB connection, go to BB5 tab, click good old "Read LBF Data" button, and Cyclone will AUTOMATICALLY detect if this is xgold213, or Texas Instruments based product.
Supported models:
Asha 200 RM-761
Asha 200 RM-762
C1-01 RM-607
C1-01 RM-608
C1-02 RM-643
C1-02 RM-644
C2-00 RM-704
C2-02 RM-692
C2-02 RM-693
C2-05 RM-724
C2-05 RM-725
C2-03 RM-702
C2-06 RM-702
C2-07 RM-692
C2-08 RM-702
X2-02 RM-694
X2-05 RM-772
Operation log:
Release NotesCode:Reading SL3 LOG File...
[Nokia C1-01 USB Phonet]: Port opened OK!
MCU Version V 06.07
MCU Date 13-10-11
Product RM-607 (Nokia C1-01)
Manufacturer (c) Nokia
IMEI 359763042577981
Mastercode 266565212
XGold213 Detected
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on [Nokia C1-01 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_2.5_M1S1
[EBL] : Ready Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00898982, Intel, Size:
1. You should have installed latest installer from http://www.karwos.hk/CycloneBoxInstaller.exe (this one released at October 2011)
2. Autoupdate will work, if not, download new exe manually from http://www.karwos.hk/updater/Cyclone.exe
3. If you encountering Autoupdate problems, check firewall.
4. After updating, make sure on bottom-right statusbar you have "No updates avaiable". This updates also downloading XMM2130 loaders from server, so make sure before you start LBF'ing XGold213, you get "No updates avaiable" - this will ensure your 100% success reading LBF data.
5. New firmware v01.88 is required. Update box using Box Maintenance. Please be patient during upgrade progress and don't disconnect your box. We have increased update tries credit numbers from 3 to 5, because of some users problems with update process.
Join us on facebook: Cyclone Box | Facebook
Best Regards,
Cyclone Team
Hi, new Firmware for Cyclone Box Classic was just uploaded to server.
Firmware: Cyclone Nokia/Blackberry Application v01.89, (Mar 29 2012 16:06:54, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Added support for new Blackberry MEPs:
MEP-09292-009
MEP-11534-009
Just use Box Maintenance to upgrade your box.
You have 5 tries to do that.
What else... server was rewritten almost from scratch few days back. That means uptime should be 99.9% right now, we eliminated major overload problems out there.
Join us on facebook: Cyclone Box | Facebook
Best Regards,
More to come,
Cyclone Box Team
http://forum.gsmhosting.com/ubb/icons/icon8.gif Cyclone Box USB 3.0 Bootloader v3.00 Released
Hi, new Bootloader for Cyclone Box is ready!
What's new?
- Built from scratch
- More startup stability
- Much better smartcard initialization routines
- 2x faster (previous boot main fw update - ~20secs, new one ~11secs)
- USB 3.0 Compatibility == 4x faster from Initial Bootloader!
Upgrade box using new bootloader, usb 3.0 mode
USB 2.0 ModeTrích:
Box Maintenance procedure started at 16:21:42
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Bootloader: Cyclone Classic Common Bootloader v3.00, (Apr 6 2012 16:14:55)
Service Tag: 0D1BB140D1F7F2475586D877E7357B6E
Connecting to Cyclone Server
Cyclone Server (2.0.0.4), Cyclone Box Team 2008-2011 - Ready.
========= Box Info =========
Box SN: C000xxx
HW Revision: B, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2009, wk23 / wk19
Set: Classic Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
Paired Card SN: xxx
First Name: xxx
Surname: xxx
Nickname: xxx
Address: xxx
Country: xxx
E-Mail: xxx
Reseller: GPGIndustries, China
Warranty Start Date: 2012-02-16
Warranty Period (months): 6
Warranty Stop Date: 2012-08-16
Warranty active: Yes
============================
Updating Security Area...
Security Area Updated, Took: 0.31s
Updating Main Firmware...
Main Firmware Updated, Took: 6.240s
Updating COM Emulator Firmware...
COM Emulator Firmware Updated, Took: 0.390s
Updating Secure Bootloader...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Firmware: Cyclone Nokia/Blackberry Application v01.89, (Mar 29 2012 16:06:54, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Boot Agent: Cyclone Secure BootAgent Server v3.01 (C) KarwosSoft 2010 wk41
Bootloader is already Up-to-date
Secure Bootloader Update Skipped
Disconnected from Cyclone Server
Box Maintenance finished successfully
Just upgrade your box using Box Maintenance.Trích:
Box Maintenance procedure started at 16:24:19
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Bootloader: Cyclone Classic Common Bootloader v3.00, (Apr 6 2012 16:14:55)
Service Tag: 0D1BB140D1F7F2475586D877E7357B6E
Product: Classic
Connecting to Cyclone Server
Cyclone Server (2.0.0.4), Cyclone Box Team 2008-2011 - Ready.
========= Box Info =========
Box SN: xxx
HW Revision: B, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2009, wk23 / wk19
Set: Classic Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
Paired Card SN: xxx
First Name: xxx
Surname: xxx
Nickname: xxx
Address: xxx
Country: xxx
E-Mail: xxx
Reseller: GPGIndustries, China
Warranty Start Date: 2012-02-16
Warranty Period (months): 6
Warranty Stop Date: 2012-08-16
Warranty active: Yes
============================
Updating Security Area...
Security Area Updated, Took: 0.94s
Updating Main Firmware...
Main Firmware Updated, Took: 11.575s
Updating COM Emulator Firmware...
COM Emulator Firmware Updated, Took: 0.749s
Updating Secure Bootloader...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Firmware: Cyclone Nokia/Blackberry Application v01.89, (Mar 29 2012 16:06:54, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Boot Agent: Cyclone Secure BootAgent Server v3.01 (C) KarwosSoft 2010 wk41
Bootloader is already Up-to-date
Secure Bootloader Update Skipped
Disconnected from Cyclone Server
Box Maintenance finished successfully
Join us on facebook: Cyclone Box | Facebook
CYCLONE BOX - POWER ON AND UPGRADE!
Stay tuned http://forum.gsmhosting.com/ubb/cool.gif
Best Regards,
Cyclone Team
Cyclone 2012 New Release Installer v1.20 CycloneBox Reloaded Launched and new Installer v1.20 http://www.gsmsaigon.vn/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 900x2092.http://www.siroya.org/images/Cyclone-Box-Reloaded.jpg
Cyclone Box Reloaded
Some More Basic Information :
- USB Bus powered only, 5V @ 500mA (2.5W)
- USB 1.0, 1.1, 2.0 and 3.0 Compatible
- Supported Operating Systems: All NT based Windows OS (including x86 and x64 platforms - drivers signed for 64bit) - this includes Windows NT, Windows Xp, Windows Vista, Windows 7, and upcoming
ones
- Lightweight construction
- Smartcard Connector
- Nokia Flashbus / FBUS RJ48 connector with TX and RX signalling LED. Pinout is UFS/JAF compatible (no need adapters anymore, plug it straight).
- Based on well-tested AVR32 technology in Cyclone Classic, powered by 66MHz 32bit RISC cpu
- Built-in VPP generator for old NOR based phones
- USB signalling led (USB transaction signalling)
- VBAT singalling led (power-up status of Flashbus port)
- Works also as USB dongle for USB-only operations, if USB connectivity with Nokia phones is needed
- Operates 100% standalone (after initial registration)
New CycloneBox Installer v1.20 (03.05.2012)
Things which introduced in new Version
- New Faster and reliable Hw introduced(Cyclone Box Reloaded)
- New Loaders v11.50.00 added
- FastMM v4.99 Introduced
- MEP-40488-004 added
- Xgold113 (Dual-sim) RPL write support added- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
- "News" added in main window
- "New Super Easy Downgrade" BB5 method added (Backup,flash,downgrade,restore rpl all just in one click)Tick in before-flash tasks
- Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar - working, red progressbar - error, yellow-paused, etc
- Boot recovery added for all boxes during box wizard
- Added COD->NCK verification upon data generation
- After COD->NCK calculation, NCK codes are automatically stored inside COD file
- New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)
- Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.
Improvements
- No need anymore to tick "Old USB flashing method" manually, it's detected automatically
- When Windows 7 is detected, software is not hidden to tray
- Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
- Automatic smartcard refill when empty addded
- Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured about our software quality and security - no hidden trojans (as happened before with other products).
- Splash updated
- Box Registration module removed (box wizard introduced)
- Box Maintenance module removed (box wizard introduced)
- Card Maintenance module removed (box wizard introduced)
- The paths is now updated on each sw startup
- Only one copy of Cyclone Box application can be launched now, this improves stability
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- Skin Stack Updated to v7.62
Bug Fixes
- Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)
- Fixed Windows7 Save Paths/Settings problem
- BB5 loader problems when skin enbled (ROM refused...etc)
- Access violation on exit fixed
- CBUS Lost Handle Fixed
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- libeay/ssleay libraries updated to latest one, much more fast and stable
- NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
- Fixed tray issues
- Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
- Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did contain Superdongle/Simlock data only)
- XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much confusion
- "security problem #1" solved on those who copied cyclonebox.dll before
- Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)
- Minor changes and bugfixes
Important Notes
1. If you are using old (Classic) Cyclone Box and having old Card serial number (2009,2010) and after latest
bootloader upgrade, your box can't enter into bootloader mode, your box boot need Recovery. This will be proceeded AUTOMATICALLY, just use Box Wizard.
2. Box Maintenance, Box Registration, Card Maintenance are removed from this release
3. Your box having 3 update credits from now
4. Box Firmware v02.01 is required, so this update could be operational
5. Use "Box Wizard". This is one-click tool for box repair (boot recovery), upgrade, activation, registration, smartcard upgrade/initialization, and so on.
6. If you are using Windows 7, autoupdate in old version may fail (fixed already). In case download installer directly, or run SW with Admin privileges.
7. ALWAYS fresh installer you could find at:
http://www.karwos.hk/CycloneBoxInstaller.exe
8. Autoupdate after updating EXE should ask you for downloading and installing latest installer. If something will fail during Autoupdate process, just look at 7 and download Installer manually.
CycloneBox Classic and Reloaded Official Website
CYCLONE BOX - RELOADED
Cyclone Team Official Facebook page
www.facebook.com/cyclonebox
http://www.siroya.org/images/blue.jpg
WHAT ???????
YOU STILL DONT HAVE CYCLONEBOX RELOADED !!!
GET IT NOW JUST IN 59 USD ONLY
Some More Mind Bl0wing Updates on the way , So Stay tune as always ;)
BR
Cyclone Team
[20-05-2012]CycloneBox Reloaded BlackBerry Module Updated
http://www.cyclonebox.com/images/cyclone-banner.png
Firmware v02.02 Released for Classic and Reloaded boxes!
-BlackBerry MEP-11534-010 Added (FIRST IN THE WORLD)!
- Support for MEP-09292-008 Fixed!
Just use “Box Wizard” to upgrade your box Firwmare!
Stay Tuned , Coming back Shortly with More Hot Stuff http://forum.gsmhosting.com/ubb/wink.gif
BR
CycloneTeam
http://forum.gsmhosting.com/ubb/icons/icon8.gif Cyclone HOT Update, Nokia N9 SECURITY FUNCTIONS ADDED!!
Hi to all,
- Nokia N9 Security Code Read Added WITHOUT DATA LOSS, WORLD FIRST !!!
- Nokia N9 Phonet connectivity added, WORLD FIRST, you can now safetly read info from your phone like from normal BB5 phones...
- Nokia N9 SX4 Authorization Added, WORLD FIRST
- Nokia N9 Security Repair Added (SX4+PM), WORLD FIRST
- Nokia N9 Read ASK file via FBUS Added, WORLD FIRST
- Nokia N9 PM Read Added, WORLD FIRST
- Nokia N9 PM Write Added, WORLD FIRST
- Nokia N9 Factory Defaults Setting added without flashing, WORLD FIRST
- Nokia N9 Mode Change added (can switch to LoCAL/TEST mode now, WORLD FIRST)
- Nokia N9 Selftests Added, WORLD FIRST
- Nokia N9 Reset FBUS/KEY NCK Counter Reset ADDED, WORLD FIRST
- Nokia N9 Send NCK via FBUS Added, WORLD FIRST
- N9 OMPA3630 Boot Support Added
- Factory BB5 RPL Writing Fixed
- DCT4 BT Flashing Fixed on some BT HW (i.e. 12/11 for 6230i, thx Pulka for reporting)
- Fixed PM Read on some Phones
- Minor Changes and Bugfixes
Just run Cyclone and autoupdate module will update your installation.
Make sure you have latest installer installed.
Firmware update IS NOT NEEDED for this update.
Few tests, Security Code Read w/o data loss:
[Nokia N9 USB Phonet]: Port opened OK!
Security Code 12345
Attempts 00
SX4 Authorization (Make sure FORCE SX4 SERVER iss TICKED)
[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer (c) Nokia
IMEI 357923041454648
Mastercode 555726146
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Cyclone Server (2.0.0.42), Cyclone Box Team 2008-2012 - Ready.
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button
Disconnected from Cyclone Server
And just basic read info...
[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer (c) Nokia
IMEI 357923041454648
Mastercode 555726146
IMEI Spare 3A75290314546404
IMEI SV 3375290314546404F0000000
CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343
PSN CZG234989
Product Code 059L7Z9
Module Code 0204965
Basic Product Code 059G8V7
PSD 0000000000000000
WLAN MAC 04A82A204D8F
Bootcode 2.0.49
Camera 0b:0125:02
APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, (c) NOKIA.
APE Test V 1.2.122
APE HW 1507
APE BT 00060000060d0020
RETU 11
TAHVO 00
AHNE 21
Asic 0
HW Signature
Simlock Server
Simlock Key 2440700000000000
Simlock Profile 0000000000000003
Simlock Aux
Simlock IMEI
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
[Nokia N9 USB Phonet]: Port opened OK!
Product Code: 059L7Z9
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering DCT4 Products - wait...
5 Products left after filtering. Ready.
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering BB5 Products - wait...
8 Products left after filtering. Ready.
This is Valid BB5 Product
Retrieving Variants for Product RM-696 - wait...
1 Variants Retrieved
No variant found with given Product Code, selecting first one
Join us on facebook: Cyclone Box | Facebook
Stay tuned,
More to come,
Cyclone Team
Cyclone HOT Update, Nokia N9 World's First SECURITY FUNCTIONS ADDED!!
http://www.gsmsaigon.vn/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 760x352.http://cyclonebox.com/images/cyclone-banner.png
!!!!! World First Update !!!!!
- Nokia N9 Security Code Read Added WITHOUT DATA LOSS, WORLD FIRST !!!
- Nokia N9 Phonet connectivity added, WORLD FIRST, you can now safetly read info from your phone like from normal BB5 phones...
- Nokia N9 SX4 Authorization Added, WORLD FIRST
- Nokia N9 Security Repair Added (SX4+PM), WORLD FIRST
- Nokia N9 Read ASK file via FBUS Added, WORLD FIRST
- Nokia N9 PM Read Added, WORLD FIRST
- Nokia N9 PM Write Added, WORLD FIRST
- Nokia N9 Factory Defaults Setting added without flashing, WORLD FIRST
- Nokia N9 Mode Change added (can switch to LoCAL/TEST mode now, WORLD FIRST)
- Nokia N9 Selftests Added, WORLD FIRST
- Nokia N9 Reset FBUS/KEY NCK Counter Reset ADDED, WORLD FIRST
- Nokia N9 Send NCK via FBUS Added, WORLD FIRST
- N9 OMPA3630 Boot Support Added
- Factory BB5 RPL Writing Fixed
- DCT4 BT Flashing Fixed on some BT HW (i.e. 12/11 for 6230i, thx Pulka for reporting)
- Fixed PM Read on some Phones
- Minor Changes and Bugfixes
NOTE :
Just run Cyclone and autoupdate module will update your installation.
Make sure you have latest installer installed.
Firmware update IS NOT NEEDED for this update.
Few tests, Security Code Read w/o data loss :
Trích:
[Nokia N9 USB Phonet]: Port opened OK!
Security Code 12345
Attempts 00
SX4 Authorization (Make sure FORCE SX4 SERVER is TICKED)
Mã:
[Nokia N9 USB Phonet]: Port opened OK! MCU Version Vp 92_11w21 MCU Date 26-05-11 Product RM-696 (Nokia RM-696) Manufacturer (c) Nokia IMEI 357923041454648 Mastercode 555726146 SX4 Status: Not authorized (74) Started mutual authenthication with card... Cyclone Server (2.0.0.42), Cyclone Box Team 2008-2012 - Ready. Receiving Phone Seed 1... Phone Seed 1 Received Sending calculated Data 1, and expecting Seed 2... Calculated Data 1 accepted, Phone Seed 2 Received Sending calculated Data 2 Calculated Data 2 sent, Checking Authorization Status again Authorization successfully finished! Looking for Virgin PM In Database... Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button Disconnected from Cyclone Server
And just basic read info...
Mã:
[Nokia N9 USB Phonet]: Port opened OK! MCU Version Vp 92_11w21 MCU Date 26-05-11 Product RM-696 (Nokia RM-696) Manufacturer (c) Nokia IMEI 357923041454648 Mastercode 555726146 IMEI Spare 3A75290314546404 IMEI SV 3375290314546404F0000000 CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343 PSN CZG234989 Product Code 059L7Z9 Module Code 0204965 Basic Product Code 059G8V7 PSD 0000000000000000 WLAN MAC 04A82A204D8F Bootcode 2.0.49 Camera 0b:0125:02 APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, (c) NOKIA. APE Test V 1.2.122 APE HW 1507 APE BT 00060000060d0020 RETU 11 TAHVO 00 AHNE 21 Asic 0 HW Signature Simlock Server Simlock Key 2440700000000000 Simlock Profile 0000000000000003 Simlock Aux Simlock IMEI Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [1,2] State: OPENED Type: GID Data: FFFF Simlock [1,3] State: OPENED Type: GID Data: FFFF Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [2,2] State: OPENED Type: GID Data: FFFF Simlock [2,3] State: OPENED Type: GID Data: FFFF Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [3,2] State: OPENED Type: GID Data: FFFF Simlock [3,3] State: OPENED Type: GID Data: FFFF Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [4,2] State: OPENED Type: GID Data: FFFF Simlock [4,3] State: OPENED Type: GID Data: FFFF Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [5,2] State: OPENED Type: GID Data: FFFF Simlock [5,3] State: OPENED Type: GID Data: FFFF Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [6,2] State: OPENED Type: GID Data: FFFF Simlock [6,3] State: OPENED Type: GID Data: FFFF Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [7,2] State: OPENED Type: GID Data: FFFF Simlock [7,3] State: OPENED Type: GID Data: FFFF Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Auto Selecting Flash Files on User Request... [Nokia N9 USB Phonet]: Port opened OK! Product Code: 059L7Z9 Scanning avaiable products... Processing C:\Program Files (x86)\Nokia\Phoenix\Products\... Processing C:\Users\karwos\Desktop\DP\... Found 14 products, Filtering DCT4 Products - wait... 5 Products left after filtering. Ready. Scanning avaiable products... Processing C:\Program Files (x86)\Nokia\Phoenix\Products\... Processing C:\Users\karwos\Desktop\DP\... Found 14 products, Filtering BB5 Products - wait... 8 Products left after filtering. Ready. This is Valid BB5 Product Retrieving Variants for Product RM-696 - wait... 1 Variants Retrieved No variant found with given Product Code, selecting first one
Join us on facebook : Cyclone Box | Facebook
Stay tuned,
More to come,
Cyclone Team
Note: Flashing is not supported atm but will be added shortly; hash reading for the unlock the same.
__________________
Hi, new firmware for Cyclone Box is ready.
What's new?
- Added support for Blackberry MEP-14896-006 - FIRST IN THE UNIVERSE http://forum.gsmhosting.com/ubb/biggrin.gif
Just update your box using "Box Wizard".
Firmware v02.04 Released.
Added support for Blackberry MEP-27501-001
Added support for Blackberry MEP-09292-007
Just use Box Wizard to update your box
Stay tuned,
More to come,
Cyclone Box Team
Hello,
What is Cycator?
This is software intended exclusivly for Cyclone Box Users which are also HW repair engineers.
Where from download?
Use Germany Server, it's in 'Cycator' Directory. Use WinRar for unpacking.
How to work with Cycator?
1. Launch Cycator SW.
2. Select Product (we will post list tomorrow, for example Tube is 5800Xm, Picollo is 6300, Picollino is 5130xm, etc). Current revision (11062012) support 69 products and PCB versions.
3. Now you can either select component from list:
and so on... and selected component will be shown on phone PCB.
second option is to write in combobox needed component number (i.e. R1400), or just Nokia Part Number.
Another option is just to point a component by mouse and on bottom-left you will see an exact component name
How it looks?
http://www.karwos.hk/Cycator.png
If the users will be happy, we will be constantly updating Cycator database.
[25.06.2012] Cyclone Box Installer v1.21 Released Hi to all, new Installer for Cyclone Box is ready to download.
What's new?
Small tests:Trích:
=====================
Installer v1.21
25.06.2012
=====================
- New BB5 FBUs/USB Loaders v12.08.00 Added
- Qualcomm Based Products support added (Lumia 800, 610, etc)
- Normal mode Flashing is supported
- Dead-mode flashing is supported
- Downgrade is supported
- Support for Multi-CNT Qulacomm Configurations
- Support secure-erase USER Area - this takes about 15-25 minutes
- Basic read info including battery information etc for Lumia products
- Automatic Variant selection for Lumia products
- Cross-flash is supported, if Public Key hash matches
- After connecting product in Normal mode, Zune drivers must be installed. Take them from C:\Program Files\Cyclone Box\Drivers\ZuneDrivers
- Flashing drivers will be installed automatically, however on some problems just install them manually from C:\Program Files\Cyclone Box\Drivers\LumiaFlashing
- Abort Button improved
- SX4 Default Database updated, added 30 new models
- Nokia Connectivity cables drivers updated to v7.1.78.0
- Minor changes and bugfixes
800 FF
610 FFTrích:
If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:
1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.
Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v257.6
Build: 12
Timestamp: 2012-02-17 14:40:05
OSBL Bootloader Ready
USB&UART Tracing set
[HA Auth] : Elevating permissions to RnD
Requested Auth Elevation Level: RnD
[HA Auth] : Challenge : 08F70ECD76F6E4EE142BE82BA00143C3E4BC91036680A62C2A 3EF07508099060B5BCAD7BA00D151307A006BB
[HA Auth] : Calculating SHA256-ECC Response...
[HA Auth] : ERROR, No HA dongle found, can't elevate, Ignore this message if you flash original Images
ESCO: Processing RM801_12w14_prod_generic_nokia_osbl.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-06 09:40:02
Signer S/N: 1725
Signer User ID: 10275021
Auth Level: Care
Data Encryption: 0
Image Index: 1
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 936.552kB @ 0x000000000007D200
Write taken 0.437s (Average speed: 17556,36kBits/s)
ESCO: Processing RM801_12w14_prod_generic_adsp.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-06 09:37:16
Signer S/N: 1735
Signer User ID: 10275021
Auth Level: None
Data Encryption: 1
Image Index: 3
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "adsp.mbn" (5.368MB)
Flushing...
Flushed OK
Write taken 7.847s (Average speed: 5730,02kBits/s)
ESCO: Processing RM801_12w14_prod_generic_amss.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-06 09:40:01
Signer S/N: 1738
Signer User ID: 10275021
Auth Level: None
Data Encryption: 1
Image Index: 4
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "amss.mbn" (15.961MB)
Flushing...
Flushed OK
Write taken 24.243s (Average speed: 5515,28kBits/s)
ESCO: Processing RM801_12140_prod_760_01_boot.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98022316
Signer Timestamp: 2012-04-20 12:32:28
Signer S/N: 1110
Signer User ID: 508009728
Auth Level: None
Data Encryption: 0
Image Index: 2
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 353.543MB @ 0x0000000010000000
Write taken 139.823s (Average speed: 21209,86kBits/s)
ESCO: Processing RM801_12w14_prod_generic_user_area_erase.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-06 09:36:19
Signer S/N: 1719
Signer User ID: 10275021
Auth Level: None
Data Encryption: 0
Image Index: 6
Asic Index: 0
Type: Image Erase
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Erasing 0x000000003C000000-0x000000077DFFFFFF (29.32GB)
Erase taken 11.232s
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
All ESCO Images Processed Successfully
Reading info...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
MCU Version 1750.0805.8773.12140
MCU Date N/A
Product Lumia Series (Nokia Lumia Series)
Manufacturer (c) Nokia
IMEI 359289045145774
Mastercode 5573422330
Public ID 8F07A22B55784E8C893370340D947D55
Product Code 059M3C1
Basic Product Code 059J2N6
Module Code 0205051
NCSd Version 1.9
HW Version 112.1402.2.3
SW Version 1750.0805.8773.12140
PSN Number 0022D28AB
ESN 00000000
WLAN MAC 6CE9070E42230000
BT ID 6CE9071AEF6B000000000000
Battery Life 35%
Battery Cycle Count 65535
Battery Temperature 38.6C
Battery Voltage 3795mV
Battery Flags 297
Battery Standby Current -6mA
Battery Max Load Current -800mA
Battery Health 860
Battery Average Current -27mA
Battery Remaining Capacity 482mAh
Battery Full Charge Capacity 1394mAh
Read info thread finished, continuing...
Flashing Successfull!
Where from download?Trích:
If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:
1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.
Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
Switching to RAW Mode...
[Nokia USB Connectivity]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v256.0
Build: 1
Timestamp: 2012-02-22 11:37:26
OSBL Bootloader Ready
USB&UART Tracing set
[HA Auth] : Elevating permissions to RnD
Requested Auth Elevation Level: RnD
[HA Auth] : Challenge : 501AFF8D3A1D2B693BD8FEC40C1C55C5CB7F7E7DAF2FF78CEA 254978752CF80142347C1C31C0AB751C001F38
[HA Auth] : Calculating SHA256-ECC Response...
[HA Auth] : ERROR, No HA dongle found, can't elevate, Ignore this message if you flash original Images
ESCO: Processing RM835_12w16_prod_generic_amss.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-13 19:53:21
Signer S/N: 2315
Signer User ID: 10318699
Auth Level: None
Data Encryption: 1
Image Index: 4
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "amss.mbn" (18.229MB)
Flushing...
Flushed OK
Write taken 18.782s (Average speed: 8139,50kBits/s)
ESCO: Processing RM835_12w16_prod_generic_user_area_erase.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-13 19:50:07
Signer S/N: 2312
Signer User ID: 10318699
Auth Level: None
Data Encryption: 0
Image Index: 6
Asic Index: 0
Type: Image Erase
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Erasing 0x000000004C000000-0x0000000795FFFFFF (29.160GB)
Erase taken 0.172s
ESCO: Processing RM835_12160_prod_296_01_boot.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98030051
Signer Timestamp: 2012-04-19 06:27:32
Signer S/N: 953
Signer User ID: 2150079744
Auth Level: None
Data Encryption: 0
Image Index: 2
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 307.683MB @ 0x0000000028000000
Write taken 94.115s (Average speed: 27422,85kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
All ESCO Images Processed Successfully
Reading info...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
MCU Version 1066.0000.8773.12160
MCU Date N/A
Product Lumia Series (Nokia Lumia Series)
Manufacturer (c) Nokia
IMEI 359313043774250
Mastercode 551675110
Public ID 88B3433D92343DDEFFED8DFC7EF2952F
Product Code 059P4D7
Basic Product Code 059L3R3
Module Code 0205127
NCSd Version 1.9
HW Version 112.1569.1.0
SW Version 1066.0000.8773.12160
PSN Number 0468BC2AB
ESN 00000000
WLAN MAC 3C363D77083A0000
BT ID 3C363D75337A0000FFFFFFFF
Battery Life 29%
Battery Cycle Count 65535
Battery Temperature 29.3C
Battery Voltage 3787mV
Battery Flags 312
Battery Standby Current -3mA
Battery Max Load Current -500mA
Battery Health 356
Battery Average Current 142mA
Battery Remaining Capacity 381mAh
Battery Full Charge Capacity 1322mAh
Read info thread finished, continuing...
Flashing Successfull!
ALWAYS FRESH installer you can get at: http://www.karwos.hk/CycloneBoxInstaller.exe
Uninstalling old version is RECOMMENDED before installing this one, however not ordinary.
You don't need to download Installer MANUALLY. It will be downloaded automatically, if you are having some of last Cyclone build with autoupdate module.
Lumia Flashing drivers will be installed automatically (according to your CPU architecture).
However, ZUNE drivers (when you are attaching phone in Normal mode) need's to be installed Manually from C:\Program files\Cyclonebox\Drivers\ZuneDrivers. This you need to ONLY ONCE.
Firmware upgrade is not needed.
Join us on facebook: Cyclone Box | Facebook
Stay tuned,
Cyclone Team
Hi to all,
Cyclone v1.0.1.684Trích:
Support Model:
Asha 200 RM-761
Asha 200 RM-762
C1-01 RM-607
C1-01 RM-608
C1-02 RM-643
C1-02 RM-644
C2-00 RM-704
C2-02 RM-692
C2-02 RM-693
C2-05 RM-724
C2-05 RM-725
C2-03 RM-702
C2-06 RM-702
C2-07 RM-692
C2-08 RM-702
X2-02 RM-694
X2-05 RM-772
- Added FIRST IN THE WORLD, FREE One-Click Contact Service repair for XGold213 Based Phones. No need to buy RPL! Just click, and in 1 second your CS will go (if CS cause is bad simlock, and reason of this is NCK reset by free softs).
- Memory fragmentation issues fixed during Lumia Flashing
- Cursor problems fixed
- XP Usb support partially fixed
- Minor changes and bugfixes
Note: >>> Just run Cyclone, and autoupdate will fetch new version automatically.
Hi, New update for Cyclone Box is ready.
What's new ?
- USB Booting problem solved
- Improved XGold2 Security Repair
- Improved RAPUv1, RAPUv2 USB Booting
- Minor changes and bugfixes
Update will be fetched automatically.
BR,
Cyclone Team
P/s: bản này update để vá lỗi cho bản Free One-Click Contact Service repair for XGold213 Based Phones.
Hi, firmware v02.05 for Cyclone Box is Released.
New MEPs added:
MEP-12599-004
MEP-12907-003
MEP-17568-004
MEP-24660-002
MEP-26490-001
MEP-26900-001
MEP-27501-002
MEP-27559-001
MEP-27561-001
MEP-29080-001
MEP-40488-001
MEP-46976-001
Stay tuned....
Best Regards,
Cyclone Box Team
[28-08-2012] CycloneBox iphone imei check service restored
iPhone IMEI check service is restored now.
- Service is not free anymore.
- Single check costs you 1 Cyclone Credit.
- Once you've checked your phone, data is cached on server and you can check it again for free.
Example output:
Code:Please Wait...
Code:Cyclone Server (2.0.0.50), Cyclone Box Team 2008-2012 - Ready.
stdClass Object
(
[imei] => 013128003164xxx
[status] => Delivered
[carrier] => AT&T USA
[locked] => Yes
[created] => 1346098925
[delivered] => 1346098982
[details] => stdClass Object
(
[errorCode] =>
[serialNumber] => QR213MTGA4S
[productVersion] => 5.1
[countryCode] => US
[partDescription] => IPHONE 4 16GB BLACK
[appliedActivationPolicyID] => 52
[assetTag] =>
[futureDataA] =>
[futureDataB] =>
[ban] =>
[carrierCode] => AT&T USA
[contractStartDate] =>
[contractEndDate] =>
[deviceFamily] => iPhone
[firstUnbrickDate] => 1.334624276E+12
[initialActivationPolicyID] => 52
[lastRestoreDate] =>
[lastUnbrickDate] => 1.334625193E+12
[macAddress] => 6CC26B9B4E58
[nextTetherPolicyID] => 52
[unbricked] => 1
[unlockDate] =>
[unlocked] =>
[imeiNumber] => 013128003164559
[ctn] => 18329225876
[iccID] => 89014104243590399073
[formattedContractStartDate] =>
[formattedcontractEndDate] =>
[formattedFirstUnbrickDate] => 17/04/12
[formattedLastUnbrickDate] => 17/04/12
[formattedLastRestoreDate] =>
[formattedUnlockDate] =>
[initialActivationPolicyDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
[bluetoothMacAddress] => 6CC26B9B4E57
[nextTetherPolicyDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
[appliedActivationDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
)
)
br
Cyclone Team
Hi, new update for Cyclone Box is ready.
=====================
Installer v1.22
09.11.2012
=====================
- New CPU support added, XGold223 (Asha 308, Asha309)
- Supported operations: Write Flash, Read/Write Certificates, Read RPL, Write RPL, etc...
- Firmware v02.11 Released
- Lumia SmartTP(R) introduced, for testers only (can detect short-circuits between Lumia eMMC Points (MISO,MOSI,CLK,CS), GND, or VCC, it shows also link quality). Use on _POWERED OFF_ PCB! When connecting power, it can show FALSE status! Very helpful during soldering time.
- New BB5 Loaders Added
- Lumia USB Flashing improved
- Latest Blackberry MEPs added
- Improved flashing speed and NPC certs reading time
- Improved CBUS protocol handling (sometimes it wents out of synchronization)
- Fixed BSI spurious glitch problem with ~2.x firmware
- Fixed DCT4 booting problems
- Improved FBUS Local Mode entry
- XGold213xx certificates Backup Added (NPC,HWC,CCC,...)
- XGold213xx Full Flash chip dump to BIN added
- XGold213xx Low-level PMM dump added (can dump PM from dead mobile)
- XGold213xx Low-Level FILESYSTEM dump from dead mobiles added. This dumps full FAT16 user data partition to BIN file for further actions (analysis, recovery, forensics, ...)
- Minor changes and bugfixes
Notes about XGold 223 flashing: Switching to RAW mode is not supported (i.e. flashing from local/test mode, ROM will respons with empty public id (000000...) - very same story as with rapido). Battery reset needed, software will prompt you, but not always. Keep it noticed.
Notes about XGold 223 RPL: Readen RPL is not full RPL backup (missing crypted PM308 data). This phone is very TexasInstruments-Nokia like, but not really. Once loaders with assymetric key hack is not ready, you SHOULDN'T full erase your phone any way.
Autoupdate module SHOULD work, if not here is link: http://www.karwos.hk/CycloneBoxInstaller.exe
Firmware v02.11 is Mandatory
:cool::cool::cool:STAY TUNED:cool::cool::cool:
Best Regards,
karwos
Hi sweeties http://forum.gsmhosting.com/ubb/biggrin.gif
I guess your life been much worser last days isn't it ?
No NaviFirm, is like not having RIGHT hand ....
Where from get your firmwares? How to work? How to life ??!!
But of course Cyclone ALWAYS have solution to THEIR customers..
yes... WORKING navifirm is now updated and built-in into CYCLONE.
No external file download, it will automatically find LandingZone and download
After download it will AUTOMATICALLY appear in BB5/DCT4/WP7 tab
OF COURSE THIS UPDATE IS FREE AND WORKS WITH CYCLONE BOX, KEY, ETC...
Life never been so easier before :P
Some shots:
What to say more ... just run Cyclone and perform AUTOUPDATE, then .. only enjoy http://forum.gsmhosting.com/ubb/smile.gif
STAY TUNED, MORE IS JUST AHEAD OF CORNER!