06-11-2009 New Cyclonebox Firmware Released

New Cyclonebox Nokia firmware is uploaded to our server.

Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application


Upgrade your box as usual using Box Maintenance functions.
To enter box bootloader mode which allows firmware rewriting, re-plug it from USB socket.
Completly Fixed problem when box failed to start sometimes after upgrade (Box is not in needed mode), and other little fixes too.
To all users who had non-starting box since last upgrade (especially HW A110/A111 owners), please upgrade it with current firmware and post results.

Also Added LED-progress upon Main Firmware Boot ; this will help to diagnose bootup problems in future; meanings of LED blinking upon startup below
- Code Optimizations
- RTOS Code Updated to 6.0.0
- GCC Compiler Updated to 4.3.2
- Device Framework Updated to 1.5.0
- Little Bugfixes

Firmware 01.0A LEDs Meaning upon Main Firmware startup
GREEN, BLUE, RED, ORANGE Firmware Starting - Initializing Interrupts and PLL Clocks (at this stage check 12MHZ Crystals)
GREEN, RED, ORANGE Initializing HW Modules, RTC (at this stage check RTC Clock)
RED, ORANGE Doing Security Checkup (Should not hang here)
ORANGE Initializing USB Stack (Check crystals, USB Cable Length, etc)
NO LEDS Firmware Booted