2610b không flash được pm
ae giúp máy 2610b đả unlock xong mình nhận khách nạp tiếng việt nhưng mcu và cnt thì được nhưng không nạp được pm , đây là log của nó.
MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 3] - C0859271
Using device: HTI BOX, FW ver: 00.17
Driver: usbuhci:usbhub:usbccgp:WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.17841(12-07-2011), Library ver: 1.0.0.11875(12-07-2011)
ASIC ID: 0x3168 [UPP_8M ver: 6.4]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0001 2C7E [AMD S29NS128N,128 Mbits] page size: 128 K type: NOR area: 01000000-01FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00C76F58:3B8ADA60
ASIC type: 11
UEM Imei: 01168400138434
Flash Imei: 01168400138434
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\01168400138434_BA CK.rpl"
Processing MCU file: rh86_87__05.65.mcusw
[DCT4,DCT4 ALGORITHM] size: 8.62 MB
Supported Ids: 3040
ASIC ID: 0x3168 [UPP_8M ver: 6.4]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0001 2C7E [AMD S29NS128N,128 Mbits] page size: 128 K type: NOR area: 01000000-01FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00C76F58:1821DA60
Area [01000000-0101FFFF] erased in 0.718 s
Area [01020000-018DFFFF] erased in 50.032 s
Area [01EE0000-01FDFFFF] erased in 6.235 s
Flash programming ...
Programming completed in 2 min 0.750 s
File Processed in 3 min 8.797 s
Processing CNT file: rh86_87__05.65.image_v
[DCT4,DCT4 ALGORITHM] page size: 64 K size: 1.19 MB
Supported Ids: 3040
ASIC ID: 0x3168 [UPP_8M ver: 6.4]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0001 2C7E [AMD S29NS128N,128 Mbits] page size: 128 K type: NOR area: 01000000-01FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00C76F58:C5A4DA78
Area [01B80000-01EDFFFF] erased in 19.422 s
Converting UCP blocks to 128 K.
Flash programming ...
Programming completed in 15.578 s
Content extract fail, continue anyway ...
File Processed in 1 min 13.031 s
Processing PPM file: rh86_87__05.65.ppm_v
[DCT4,DCT4 ALGORITHM] size: 2.44 MB
Supported Ids: 3040
Boot error: CC CC CC 00
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
flashing terminated !
Task failed at (0800002A)!!!
Last RX buffer: 02 00
ae xem hướng dẩn giùm mình mới tập chạy phần mềm nên không rành lắm. Thanks ae trước.
