[nokia6030]dính lỗi nhờ ae cho ý kiến!!!
Em có con máy nokia 6030 em click bật nút nguồn lúc đc lúc không,mặc dù em đã câu tắt công tắc nguồn rùi nhưng vẫn vậy.Em đem ra BOX check thì box không nhận nhưng info thì đc em chọn file flash cho em nó thì jaf báo lỗi thế này ạh! nhờ các bác ai gặp qua rùi cho em xin ý kiến khắc phục.
Log em nó đây ạh!
MCU ID: 0xFFFF
Can't find boot file...
Failed! Aborting!
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Administrator\Desktop\RM-74\rm74__5.400
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Administrator\Desktop\RM-74\rm74__5.400
PPM Flash file: C:\Documents and Settings\Administrator\Desktop\RM-74\rm74__5.40v
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,Vietnamese,Chinese S,Chinese T
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Administrator\Desktop\RM-74\rm74__5.400
PPM Flash file: C:\Documents and Settings\Administrator\Desktop\RM-74\rm74__5.40v
CNT Flash file: C:\Documents and Settings\Administrator\Desktop\RM-74\rm74__5.40.image_v_128
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,Vietnamese,Chinese S,Chinese T
Backing up PM Field 208 as RPL...
Setting local mode...
Reading IMEI...
Reading IMEI data...
Building RPL backup file...
C:\Program Files\ODEON\JAF\ProgData\358081015332263_imei_back up_961310.rpl
Done!
Backup imei OK!
MCU: C:\Documents and Settings\Administrator\Desktop\RM-74\rm74__5.400
Booting phone...
Incorect MCUID!
Causes:
1. Cable is not good -> check for 68k resistor b/w bsi-gnd in connector and 3.3k resistor in serial with bsi line
MCU ID: 0xFFFF
This MCU ID is not supported in chosen flash file...
Error booting phone...
