xem giùm log 1280

máy mất nguồn , flash báo lổi thế này nhờ ae giúp thanks all


MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 3] - C0855D93
Using device: HTI BOX, FW ver: 00.24
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
Do not disconnect or abort this operation otherwise phone will be damaged.
Device synchronized.
CPU: XGOLD 110
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.19
EBL version : Default_RAM_Bootloader
Set baud rate to: 921.60 Kbps
Flash ID: 0020 88C0 [ST M58MWR064FU,64 Mbits]
Processing file: rm647_005.800
Downloading item CODE:hw_b2_rm647_r05.800.fls, num block: 3, size: 3.99 MB
Erasing area 0x00800000-0x00A0FFFE ...OK
Programming ...
flashing terminated !
Task failed at (08000024)!!!
Last RX buffer: FF 02 00 04 08 02

lúc đầu thì check ok nhưng khi flash bị lổi thì check log như thế này
MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 3] - C0855D93
Using device: HTI BOX, FW ver: 00.24
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
Device synchronized.
CPU: XGOLD 110
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.19
EBL version : Default_RAM_Bootloader
Set baud rate to: 921.60 Kbps
Flash ID: 0020 88C0 [ST M58MWR064FU,64 Mbits]