Em nhận con 1200 máy không nhận sjm .e cho thử chạy trương trình thì thì báo lỗi .đây là log của e nó mn xem cho ý kiến .Thanks all
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20251(25-02-2012), Library ver: 1.0.0.13946(25-02-2012)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\35686802313081_BACK.r pl).
Processing MCU file: rh99_05.910
[DCT4,DCT4 ALGORITHM] size: 2.27 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0083132D:2984DA60
Area [01000000-0100FFFF] erased in 1.047 s
Area [01010000-013AFFFF] erased in 1 min 1.015 s
Area [013B0000-013EFFFF] erased in 4.359 s
Area [017C0000-017EFFFF] erased in 0.031 s
Area [01FC0000-01FEFFFF] erased in 0.031 s
Flash programming ...
Programming completed in 18.094 s
File Processed in 1 min 31.907 s
Processing CNT file: rh990_nai5.91mr
[DCT4,DCT4 ALGORITHM] size: 110.59 KB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0083132D:2984DA60
Area [01380000-013AFFFF] erased in 3.235 s
Flash programming ...
Programming completed in 0.891 s
Extracting Content Pack, File Server fake reply for CUI phone.
Content Pack extracted successfully in 0.141 s
File Processed in 20.515 s
Processing PPM file: rh99_05.91mr
[DCT4,DCT4 ALGORITHM] size: 1.13 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0083132D:2984DA60
Area [01240000-0124FFFF] erased in 1.062 s
Area [01250000-0137FFFF] erased in 20.109 s
Flash programming ...
Programming completed in 9.047 s
File Processed in 37.485 s
Total time for flashing process(boot+erase+write) was 2 min 29.922 s
Phone type: RH-99
SW version: V 5.91 27-03-09 RH-99 (c) NMP
Imei plain: 35686802313081-8
Product code: 0546862
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: MR
Language Pack:
- not available.
Master code: 4603201624
SIMLOCK_DATA corrupted!
