x2-02 2sim bị contact sevice
đây là log của em nó xin mấy hynh chỉ giúp em với!!!!
MXKEY [FT SCR2000 0], SN: C0855454
Using device: USB Phonet and HTI, FW ver: 00.50, SN: 0000648A
Connection status: UHCI:HUB:USB 1.10 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.72
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)
Do not disconnect or abort this operation otherwise phone will be damaged.
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 9EF9DDC
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.46
EBL version : Quantum_Bootloader_10.46_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 [Intel NU48F512,512 Mbits]
Processing file: rm694__10.91.mcusw
Downloading item CODE:rm694__10.91.mcusw_ebl_psi.fls, num block: 4, size: 26.25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.344 s
Erasing area 0x40280000-0x41B7FFFE ...OK
Programming completed in 29.078 s
Checksum verified (0x27E3)
Processing file: rm694__10.91.ppm_v
Downloading item CUST:package_v.ppm_ebl_psi.fls, num block: 1, size: 5.51 MB
Erasing area 0x41C00000-0x42181C72 ...OK
Programming completed in 6.531 s
Checksum verified (0x76E8)
Processing file: rm694__10.91.image_v_059D1W0
Downloading item CUST:package_v_059D1W0.image.fls, num block: 1, size: 14.25 MB
Erasing area 0x42300000-0x43E1FFFE ...OK
Programming completed in 17.281 s
Checksum verified (0x2887)
Total time for flashing process(boot+erase+write) was 7 min 3.718 s
Waiting for device boot up ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 9EF9DDC
Phone type: RM-694 (Nokia X2-00)
SW version: V 10.91 08-02-12 RM-694 (c) Nokia
Imei plain: 35196005051734-1
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: V
Language Pack:
- not available.
Master code: 4671226653
SIMLOCK_DATA corrupted!
Market items is empty, please select the correct products path !
