1110i chết nguồn

Bản in

Show 40 post(s) from this thread on one page

03-07-2012, 16:09
aishikeru

1110i chết nguồn

tình hình em nhận cây 1110i khách báo để qua đêm mất nguồn.em check info oke hết.thế là chạy nhưng ko dc .báo
1st Boot: Ok, DCT4, UPP: 2201 [Rh-93] [2.2.0.0]
2nd Boot: u_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
Algorithm: u_intel.fia, Ver: 4.80.0
Algorithm Ok, MSID: 84A00B172D2AD1FF72B56455F9
Decoded MSID: 3E4EBAE9-00101B78-AA000000
Encoded FAID: 14AC4C23-1E0072AE-F7AA2979
IMAGE: rh93_07.020
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013BFFFF Erased, Time: 00:35
Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:01
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:15
IMAGE: rh930_nai7.02md
Area1: 0x01380000-0x013BFFFF Erased, Time: 00:02
CNT Flashing Completed, Time: 00:01
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

em chạy đủ kiểu .từng file 1 cũng not ok.jaf.ufs.mx key đều báo lỗi ở file cnt.tháo trở đôi bsi vẫn check oke.chả biết sao.các bác cho em xin cao kiến.thanks
03-07-2012, 16:14
MLONG_GSM

cho cái log mx lên chiêm ngưỡng anh .tháo trở đôi sao check dc ta .
03-07-2012, 16:16
manhdung81mobile

ban dùng jaf xóa full nạp lại coi
03-07-2012, 16:22
NGỌC HÒA_GSM

mang wa box khac và cáp khác thử xem
03-07-2012, 16:25
aishikeru

tháo trở đôi ra vẫn check đuơc mới lạ.đã xóa full nạp lại.cáp này vẫn chạy oke rất nhiều em rồi.để em lấy log mxkey
03-07-2012, 16:28
aishikeru

check mx key báo thế la hết

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C0855712
Using device: HTI, FW ver: 00.50, SN: 0000A74D
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)
ASIC ID: 0x2201 [UPP_2M ver: 2]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x5690
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00101B78:2984DA60
ASIC type: 2
UEM Imei: 35769701484190
Flash Imei: 35769701484190
MasterCode: 232B651567
RPL saved to "C:\mobileEx\3.5\data\backup\35769701484190_BACK.r pl"
03-07-2012, 16:32
MLONG_GSM

nhích chân u rồi chạy lại anh .chắc ok .không dc thay con khác thôi
03-07-2012, 16:32
KUNEK_GSM™

thay cong cáp khác xem sao hehe không thì xóa flat
03-07-2012, 16:33
mvu401

thay con nguồn là ok
03-07-2012, 16:33
aishikeru

flash báo

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C0855712
Using device: HTI, FW ver: 00.50, SN: 0000A74D
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)
ASIC ID: 0x2201 [UPP_2M ver: 2]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x5690
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00101B78:2984DA60
ASIC type: 2
UEM Imei: 35769701484190
Flash Imei: 35769701484190
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\35769701484190_BA CK.rpl"
Processing MCU file: rh93_07.020
[DCT4,DCT4 ALGORITHM] size: 1.89 MB
Supported Ids: 0120, 0121, 1021, 1120, 1130, 1131, 1201, 2140, 2142, 2201, 2031, 2030, 2032, 2033
ASIC ID: 0x2201 [UPP_2M ver: 2]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x5690
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00101B78:2984DA60
Area [01000000-0100FFFF] erased in 0.547 s
Area [01010000-013BFFFF] erased in 32.218 s
Area [013C0000-013EFFFF] erased in 1.704 s
Area [017C0000-017EFFFF] erased in 0.031 s
Area [01FC0000-01FEFFFF] erased in 0.031 s
Flash programming ...
Programming completed in 16.563 s
File Processed in 58.328 s
Processing CNT file: rh930_nai7.02md
[DCT4,DCT4 ALGORITHM] size: 163.08 KB
Supported Ids: 0120, 0121, 1021, 1120, 1130, 1131, 1201, 2140, 2142, 2201, 2031, 2030, 2032, 2033
ASIC ID: 0x2201 [UPP_2M ver: 2]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x5690
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00101B78:2984DA60
Area [01380000-013BFFFF] erased in 2.156 s
Flash programming ...
Programming completed in 1.391 s
Content extract fail, continue anyway ...
File Processed in 40.297 s
Processing PPM file: rh93_07.02md
[DCT4,DCT4 ALGORITHM] size: 1.50 MB
Supported Ids: 0120, 0121, 1021, 1120, 1130, 1131, 1201, 2140, 2142, 2201, 2031, 2030, 2032, 2033
ASIC ID: 0x2201 [UPP_2M ver: 2]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x5690
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00101B78:2984DA60
Area [011E0000-011EFFFF] erased in 0.500 s
Area [011F0000-0137FFFF] erased in 13.390 s
Flash programming ...
Programming completed in 12.937 s
File Processed in 34.015 s
Total time for flashing process(boot+erase+write) was 2 min 12.640 s

Show 40 post(s) from this thread on one page