em có con x1-01 lắp sim 2 vào thì nó báo take invalid sim out...nhung lắp sang sim 1 thì vẫn dùng binh thường... bác nào gặp qua chỉ em với...thaks all
em đã chạy lại phần mềm
em có con x1-01 lắp sim 2 vào thì nó báo take invalid sim out...nhung lắp sang sim 1 thì vẫn dùng binh thường... bác nào gặp qua chỉ em với...thaks all
em đã chạy lại phần mềm
bạn cho vào box chạy lại cho e nó cái xem thế nào, nếu nót ok thì quang cái log lên ae coi sao.
************************************************** ****
TIME STARTS HERE
************************************************** ****
Sending PBL 19456 bytes...
PBL Successfully Sent...
Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer: Samsung Electronics Corp.
Flash Chip Type: K8S6415ETC 64 Mbit (4Mb x 16) NOR
Extended Information: Multiple Bank / Burst / 1.8v
Processing Image File: C:\Documents and Settings\03203522264\Desktop\X1-01 RM-713 v07.50 ppm_mr Full\rm713_007.500
FIRMWARE Image Found...
Number of Sections: 03
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 03
FIRMWARE Erase Block: 0x00000000~0x0001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 24576 bytes
Data Checksum: 55FD
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 03
FIRMWARE Erase Block: 0x00800000~0x00BFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 4128768 bytes
Data Checksum: AA06
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 03
FIRMWARE Erase Block: 0x00C5D000~0x00E5FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1697536 bytes
Data Checksum: C1B9
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...
Processing Image File: C:\Documents and Settings\03203522264\Desktop\X1-01 RM-713 v07.50 ppm_mr Full\rm713_007.50mr
PPM Image Found...
Number of Sections: 01
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x00100000~0x006120BE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 5316800 bytes
Data Checksum: 93CE
Uploading Data Blocks to phone...
PPM Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...
Processing Image File: C:\Documents and Settings\03203522264\Desktop\X1-01 RM-713 v07.50 ppm_mr Full\rm7130_nai07.50mr
CONTENT Image Found...
Number of Sections: 01
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x00E60000~0x00F0E53E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 714048 bytes
Data Checksum: 111B
Uploading Data Blocks to phone...
CONTENT Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...
Exit Flash Mode Done...
Time Elapse : 00:04:21
************************************************** ****
You must Factory Reset the phone to enable the
ringtones and other customized settings to work
************************************************** ****
Waiting For Phone to go Online...
5, 4, 3, 2, 1...
MCU: V 07.50 29-11-11 RM-713 (c) Nokia
IMEI: 359321042014842
Product Serial Number: 62A10E7AH
Product Code : 059G464
Module Code : 0204727
Basic Production Code: 059L8X6
PPM SW Version : V 07.50 29-11-11 RM-713 (c) Nokia MR
ADSP Version : p V 07.50\n29-11-11\nRM-713\n(c) NMP\nmr
MCU SW Version : V 07.50 29-11-11 RM-713 (c) Nokia
HW Version : 1000
UEM Version : 1328
UPP Version : 8850
LCD Version : TPO:BARACOAv82 HX5081
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC : 11
PROVIDER : Default Test Operator
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : PASSED
FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK
log của nó đấy ... em chạy bằng atf
BẠN LÀM THEO HÌNH NÀY ĐÃ OK VÀI CÂY http://upanh.ssc.im/images/905sieuth...2011121835.jpg
hinh nho qua anh oi]
Bạn thay con ic sim 2 trước kok được thì làm con màu đen theo hình
uk các bác còn cách nào lữa ko giúp em với
bạn làm gì rồi hay hỏi để đó thuib
em chạy phần mềm ui
em dang có 1 con
nhưng ko pít làm từ dâu
bạn phải vào chế độ chọn 2 sim ok
nhưng chạy lại phần mềm ùi mà...các bác
chạy ver 7.50 xem sao bạn
haha được ùi các bác ơi ...chạy lại phần mềm phát lữa ok ui..hjhj .thaks các bác đã nhiệt tình giúp đỡ nhé .....thaks tất cả mọi người