nhờ mọi người xem dùm em log 1208

Using device: HTI, FW ver: 00.50, SN: 00010C7B
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00D35FB3:DA3BDA66
ASIC type: 11
UEM Imei: 35486802927658
Flash Imei: 35486802927658
MasterCode: 4020264541
RPL saved to "C:\mobileEx\3.5\data\backup\35486802927658_BACK.r pl"

Phone type: RH-105
SW version: V 6.00 30-09-09 RH-105 (c) NMP
Imei plain: 35486802927658-3
Product code: 0549905
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: MR
Language Pack:
- not available.

Master code: 7050766002

Imei net: 35486802927658
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000010002

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
tiinhf hình em nó ko lên đượ nguồn , khi kẹp vào máy kẹp nguồn lần đầu mở thì dao động đẹp nhưng không lên em mở lại lần nữa thì máy lại không có dao động gì, em đã thay dao động , làm lại upp , flash , và uem chạy lại phần mềm nhưng tình trạng vẫn như cũ nhờ mọi người giúp dùm em

log đẹp mà bạn, kiểm tra màn hình, not ok làm upp xem sao.

fash lại ver 5.91 xem log trên đẹp rùi not ok thay con dao đông cạnh ic nguồn xem

em thay lun rồi nhưng ko được

đây là log khi em chạy lại


Using device: HTI, FW ver: 00.50, SN: 00010C7B
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\35486802927658_BACK.r pl).
Processing MCU file: rh105_06.000
[DCT4,DCT4 ALGORITHM] size: 2.27 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00D35FB3:2984DA60
Area [01000000-0100FFFF] erased in 0.610 s
Area [01010000-013AFFFF] erased in 35.062 s
Area [013B0000-013EFFFF] erased in 2.906 s
Area [017C0000-017EFFFF] erased in 0.031 s
Area [01FC0000-01FEFFFF] erased in 0.047 s
Flash programming ...
Programming completed in 21.453 s
File processed in 1 min 7.984 s
Processing CNT file: rh1050_nai6.00mr
[DCT4,DCT4 ALGORITHM] size: 139.50 KB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00D35FB3:2984DA60
Area [01380000-013AFFFF] erased in 1.875 s
Flash programming ...
Programming completed in 1.328 s
Extracting Content Pack, File Server fake reply for CUI phone.
Content Pack extracted successfully in 0.140 s
File processed in 21.547 s
Processing PPM file: rh105_06.00mr
[DCT4,DCT4 ALGORITHM] size: 1.20 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00D35FB3:2984DA60
Area [01240000-0124FFFF] erased in 0.687 s
Area [01250000-0137FFFF] erased in 11.516 s
Flash programming ...
Programming completed in 11.547 s
File processed in 31.250 s
Total time for flashing process(boot+erase+write) was 2 min 0.797 s


Phone type: RH-105
SW version: V 6.00 30-09-09 RH-105 (c) NMP
Imei plain: 35486802927658-3
Product code: 0549905
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: MR
Language Pack:
- not available.

Master code: 7050766002

Imei net: 35486802927658
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000010002

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
khi chạy đến file CNT thì chỉ chạy được 90% là nó chuyển sang file PPM

anh em nào ghé qua xin chỉ giáo dùm em

flash ok mà không lên bạn thử thay cái cáp xem sao đã gặp trường hợp trên !

thử sơi cáp khác coi kt luôn cái soc két

kiểm tra chân màn hình cáp xem.thay màn nữa. thay chuẩn thạch anh 26mhz

bị màn hình rồi anh ơi.kiểm tra lại chân đi không dc thì kiểm tra 2 hàng tụ ơ sau MH có bị hư không thay la ok