Bản in
thay uem lên nguồn hêt contact nhưng ko đồng bộ được nhờ ae giúp
check như thế này , em ko flash được
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 4], SN: C0855D93
Using device: HTI, FW ver: 00.50, SN: 0000B3E9
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14195(13-07-2012)
ASIC ID: 0x3040 [UPP_4M ver: 4.1]
Error sending bootloader !
em flash thấy nó vào test mode mà ko flash được , báo lổi thê
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 4], SN: C0855D93
Using device: HTI, FW ver: 00.50, SN: 0000B3E9
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14195(13-07-2012)
ASIC ID: 0x3040 [UPP_4M ver: 4.1]
Error sending bootloader !
Processing MCU file: rm291__06.80.mcusw
[DCT4,DCT4 ALGORITHM] size: 8.60 MB
Supported Ids: 3040
Boot error: AA 04 00 01
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
flashing terminated !
Xem lại cọng cáp đổi cáp khác rồi flash lại xem.
lắc lại uem đã ok , thanks ae