xem giúp log n2680s

máy lắp sim treo phím toàn bộ.
e chạy báo lổi thế này nhờ ae giúp

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C0855D93
Using device: HTI, FW ver: 00.50, SN: 0000B3E9
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\35319403212051_BACK.r pl).
Processing MCU file: rm392__06.17.mcusw
[DCT4,DCT4 ALGORITHM] size: 11.81 MB
Supported Ids: 3160, 3161, 3162, 3164, 3166
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00482F18:3B8ADA60
Area [01000000-0101FFFF] erased in 1.156 s
Area [01020000-01CFFFFF] erased in 1 min 58.234 s
Flash programming ...
Programming completed in 1 min 31.735 s
File Processed in 3 min 38.172 s
Processing CNT file: rm392__06.17.image_v
[DCT4,DCT4 ALGORITHM] page size: 128 K size: 5.25 MB
Supported Ids: 3160, 3161, 3162, 3164, 3166
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00482F18:C5A4DA78
Area [02180000-02E7FFFF] erasing ...
ERROR: Packet Error(0xAA), code 0x4A000001
Error while erasing 0x029E0000-0x029FFFFF, Result: 0100004A
flashing terminated !
Task failed at (08000025)!!!
Last RX buffer: 01 00 00 4A

nhưng log check thi ok thế này


Phone type: RM-392 (Nokia 2680s-2)
SW version: V 06.17 10-03-09 RM-392 (c) Nokia
Imei plain: 35319403212051-5
Imei OTP: 35319403212051
Product code: 0571031
Cellular system: GSM
ASIC ID: 0x3162, type: 11
Ppm Id: V
Language Pack:
- not available.

Master code: 5220276023

Imei net: 35319403212051
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 000000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

ERROR: Packet Error(0xAA), code 0x4A000001
Error while erasing 0x029E0000-0x029FFFFF, Result: 0100004A
flashing terminated !
Task failed at (08000025)!!!
Last RX buffer: 01 00 00 4A
Thay cáp flash lại xem sao.
thông thường máy treo toàn bộ bị con U là nhiều :D

lấy cái cáp chọt (*)(*)(*) hoặc dùng cáp khác thử lại anh
máy treo phím có nghe gọi ok thì coi lại có chập phím nào không ?

dòng đó làm cu chuối lên làm tú tú thôi bạn nhé kt câu ap rồi thao ra vệ sinh sach sẻ đả chứ chạy chết máy là mất cuu luôn đó bạn ko hết lam cpu thôi

không nghe gọi được
con đây log mới chạy lại , không biết bi lổi gì


MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 3] - C0855D93
Using device: POTATO BOX, FW ver: 01.B1
Connection status: UHCI:HUB:USB 1.10 (Full-speed)
Driver: FTDIBUS, ver: 2.0.0.0 , NTMP ver: 2.0.0.1
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\35319403212051_BACK.r pl).
Processing MCU file: rm392__06.17.mcusw
[DCT4,DCT4 ALGORITHM] size: 11.81 MB
Supported Ids: 3160, 3161, 3162, 3164, 3166
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00482F18:3B8ADA60
Area [01000000-0101FFFF] erased in 1.172 s
Area [01020000-01CFFFFF] erased in 1 min 59.703 s
Flash programming ...
Programming completed in 1 min 12.609 s
File Processed in 3 min 26.516 s
Processing CNT file: rm392__06.17.image_v
[DCT4,DCT4 ALGORITHM] page size: 128 K size: 5.25 MB
Supported Ids: 3160, 3161, 3162, 3164, 3166
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00482F18:C5A4DA78
Area [02180000-02E7FFFF] erasing ...
Error while erasing 0x029E0000-0x029FFFFF, Result: 00000000
flashing terminated !

đã flash nhiều box và cáp , nhưng cùng chung kết quả

flash tới đây là báo lổi, nhờ ae giúp

MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 3] - C0855D93
Using device: POTATO BOX, FW ver: 01.B1
Connection status: UHCI:HUB:USB 1.10 (Full-speed)
Driver: FTDIBUS, ver: 2.0.0.0 , NTMP ver: 2.0.0.1
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\35319403212051_BACK.r pl).
Processing MCU file: rm392__06.17.mcusw
[DCT4,DCT4 ALGORITHM] size: 11.81 MB
Supported Ids: 3160, 3161, 3162, 3164, 3166
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00482F18:3B8ADA60
Area [01000000-0101FFFF] erased in 1.172 s
Area [01020000-01CFFFFF] erased in 1 min 59.703 s
Flash programming ...
Programming completed in 1 min 12.609 s
File Processed in 3 min 26.516 s
Processing CNT file: rm392__06.17.image_v
[DCT4,DCT4 ALGORITHM] page size: 128 K size: 5.25 MB
Supported Ids: 3160, 3161, 3162, 3164, 3166
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00482F18:C5A4DA78
Area [02180000-02E7FFFF] erasing ...
Error while erasing 0x029E0000-0x029FFFFF, Result: 00000000
flashing terminated !