anh em coi hộ em cái log flash usp c2-03
em nhận máy vào sài đc 1 lúc là tự tắt nguôn sông tự mở lên lạ em chạy cho em nó phát h trắng mh
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 1], SN: C0874392
Using device: USB Phonet and HTI, FW ver: 00.24, SN: 00015515
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.75
Module ver: 1.0.0.20814(05-05-2012), Library ver: 1.0.0.14060(05-05-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 2DBD857A
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.46
EBL version: Quantum_Bootloader_10.46_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI:
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD__back.RPL)
Processing file: rm702__06.97.mcusw
Downloading item CODE:rm702__06.97.mcusw_ebl_psi.fls, num block: 4, size: 28 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.328 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.343 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.375 s
Erasing area 0x40280000-0x41D3FFFE ...OK
Programming completed in 34.281 s
Checksum verified (0xA701)
Processing file: rm702__06.97.ppm_v
Downloading item CUST:package_v.ppm_ebl_psi.fls, num block: 1, size: 5.26 MB
Erasing area 0x41DC0000-0x42300772 ...OK
Programming completed in 6.515 s
Checksum verified (0x5007)
Processing file: rm702__06.97.image_v_059L5S8
Downloading item CUST:package_v_059L5S8.image.fls, num block: 1, size: 11.88 MB
Erasing area 0x424C0000-0x43E1FFFE ...OK
Programming completed in 17.187 s
Checksum verified (0xCB72)
Total time for flashing process(boot+erase+write) was 9 min 18.297 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...
Phone not found, retrying ...
Warning: Phone did not reboot to normal mode.
