nhờ các bác xem giúp nó báo lỗi gì
MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C08593E1
Using device: HTI, FW ver: 00.50, SN: 0100BCDF
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20814(05-05-2012), Library ver: 1.0.0.14060(05-05-2012)
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8981 [Intel NU48F256,256 Mbits] page size: 128 K type: NOR area: 01000000-02FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0008206B:DA3BDA66
ASIC type: 11
UEM Imei: 35521103028216
Flash Imei: 35521103028216
MasterCode: 7752567362
RPL saved to "C:\mobileEx\3.5\data\backup\35521103028216_BACK.r pl"
Phone type: RM-394 (Nokia 1680c-2)
SW version: V 06.82 26-09-08 RM-394 (c) Nokia
Imei plain: 35521103028216-8
Imei OTP: 35521103028216
Cellular system: GSM
ASIC ID: 0x3162, type: 11
Ppm Id: V
Language Pack:
- not available.
Master code: 7736630201
Camera config: GR0103D1012601022C00, ver: XXX.XXX
warning: DCC corrupted !
Imei net: 35521103028216
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 000000000001000B
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
