Nhờ ae xem cái log dùm em với
Pac nào biết cho e hỏi sau khi e hạ V từ 7.50 xuống 5.29 giờ e chạy lên ver nào cũng báo vậy là sao a.e ko rành mấy cái này lắm.thanks ae nha.
Backup already exists(C:\mobileEx\3.5\data\backup\XGOLD_RM-713_1E2C7D8F4217C144_IMEI.back)
MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C085CB01
Using device: HTI, FW ver: 00.50, SN: 0100EB03
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21719(09-05-2013), Library ver: 1.0.0.14397(09-05-2013)
Device synchronized.
CPU: XGOLD 110
Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.24
EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 0020 8804 - 23280001 [ST 58LR128U,128 Mbits]
CFI information:
Flash settings: 0/64, size: 0x01000000
2 Block regions:
127 x 0x00020000 = 0x00FE0000
4 x 0x00008000 = 0x00020000
EBL ready !
Processing file: rm713_007.500
Downloading item CODE:hw_b1_rm713_r07.500.fls, num block: 3, size: 5.58 MB
Erasing area 0x00000000-0x00005FFE ...OK
Programming completed in 0.563 s
Erasing area 0x00800000-0x00BEFFFE ...OK
Programming ...
flashing terminated !
Task failed at (08000024)!!!
Last RX buffer: FF 02 00 04 08 02
