máy bị lỗi cặp, e thay cặp khác N101 và flash ok, nhưng ko đồng bộ được, nhờ ae xem dùm cái log. thanks all:o
===Flashing [MCU]===
File : rm769_007.200
Image : hw_f3_rm769_r07.200.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00000000 , Len : 0x00020000
Erasing, wait ...
Erase done
Write , Start : 0x00000000 , Len : 0x00006000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00800000 , Len : 0x00400000
Erasing, wait ...
Erase done
Write , Start : 0x00800000 , Len : 0x003F0000
Flashing , wait ...
Region flash done
Processing Region 3/3
Erase , Start : 0x00C5D000 , Len : 0x00203000
Erasing, wait ...
Erase done
Write , Start : 0x00C5D000 , Len : 0x0019E700
Flashing , wait ...
Region flash done
Check : 0C61
===Flashing [PPM]===
File : rm769_007.20mr
Image : hw_f3_rm769_007.20mr.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00100000 , Len : 0x00700000
Erasing, wait ...
Erase done
Write , Start : 0x00100000 , Len : 0x0050A940
Flashing , wait ...
Region flash done
Check : F8D6
===Flashing [CNT]===
File : rm7690_nai07.20mr
Image : hw_f3_rm7690_nai07.20mr.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00E60000 , Len : 0x00100000
Erasing, wait ...
Erase done
Write , Start : 0x00E60000 , Len : 0x000AE4C0
Flashing , wait ...
Region flash done
Check : DE60
Flashing done, rebooting...
-> Infineon info : Do FullFactory Sets after flashing
Flashing Done!
Init Service mode... Wait...
Init service mode failed!
Try powerup phone manually and connect
Connect phone on selected interface...
còn đây log MXbox
Device synchronized.
CPU: XGOLD 110
Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.24
EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 00EC 2404 - 23280002 [Samsung K5N2833ATM,128 Mbits]
CFI information:
Flash settings: 0/1, size: 0x01000000
2 Block regions:
255 x 0x00010000 = 0x00FF0000
8 x 0x00002000 = 0x00010000
EBL ready !
Processing file: rm769_007.200
Downloading item CODE:hw_f3_rm769_r07.200.fls, num block: 3, size: 5.58 MB
Erasing area 0x00000000-0x00005FFE ...OK
Programming completed in 0.538 s
Erasing area 0x00800000-0x00BEFFFE ...OK
Programming completed in 1 min 9.736 s
Erasing area 0x00C5D000-0x00DFB6FE ...OK
Programming completed in 29.776 s
Checksum verified (0x0C61)
Processing file: rm769_007.20mr
Downloading item CUST:hw_f3_rm769_007.20mr.fls, num block: 1, size: 5.04 MB
Erasing area 0x00100000-0x0060A93E ...OK
Programming completed in 1 min 27.925 s
Checksum verified (0xF8D6)
Processing file: rm7690_nai07.20mr
Downloading item CUST:hw_f3_rm7690_nai07.20mr.fls, num block: 1, size: 700.45 KB
Erasing area 0x00E60000-0x00F0E4BE ...OK
Programming completed in 11.612 s
Checksum verified (0xDE60)
Total time for flashing process(boot+erase+write) was 5 min 14.875 s
đây là log MXbox vẫn not ok)tqd(
