-
n109 trắng treo
đây là log flash , nhung not ok nho ae chi giáo
MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C0855D93
Using device: USB ROM and HTI, FW ver: 00.50, SN: 0100E867
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.84
Module ver: 1.0.0.21719(09-05-2013), Library ver: 1.0.0.14397(09-05-2013)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.37
EBL version: Quantum_Bootloader_10.37_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI:
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD__back.RPL)
Processing file: rm907__04.10.mcusw
Downloading item CODE:rm907__04.10.mcusw_ebl_psi.fls, num block: 4, size: 26 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.343 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.391 s
Erasing area 0x40280000-0x41B3FFFE ...OK
Programming completed in 30.797 s
Checksum verified (0x5C1B)
Processing file: rm907__04.10.ppm_s3
Downloading item CUST:package_s3.ppm_ebl_psi.fls, num block: 1, size: 4.45 MB
Erasing area 0x41BC0000-0x4203137E ...OK
Programming completed in 5.688 s
Checksum verified (0xE247)
Processing file: rm907__04.10.image_s3_059Q8S5
Downloading item CUST:package_s3_059Q8S5.image.fls, num block: 1, size: 15.75 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 20.250 s
Checksum verified (0x3A03)
Total time for flashing process(boot+erase+write) was 7 min 43.078 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-00 USB Phonet, PORT_ID: 341D180F
Verifying communication to device OK.
Phone type: RM-907 (109)
SW version: V 04.10 16-10-12 RM-907 (c) Nokia
Imei plain: 35635305763069-4
Product code: 059R438
Language Pack:
- not available.
SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
RPL saved to "C:\mobileEx\3.5\data\backup\BB5_RM-907_356353057630694_13_03_14_132324_SIM.RPL"
SIMLOCK seems to be valid
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed
Imei net: 35635305763069
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000004000B
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
Market items is empty, please select the correct products path !
-
