nokia 105 rm-908 tại sao chạy lại phần mềm bằng box ATF báo lỗi thế nhỉ?
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done
Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...
************************************************** ****
TIME STARTS HERE
************************************************** ****
Sending PBL 19456 bytes...
PBL Successfully Sent...
Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer: Spansion Electronics Corp.
Flash Chip Type: 64 Mbit (4Mb x 16) NOR
Extended Information: Mirrorbit / Multi-Bank / 1.8v
Processing Image File: C:\Documents and Settings\Administrator\My Documents\Downloads\rm-908\rm908_004.350
Data Block Found...
Number of Sections: 03
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 03
IMAGE Erase Block: 0x00000000~0x0001FFFE
ERROR: Erase IMAGE Block Failed !!!
Flashing ERROR
ERROR : PHONE READ INFO FAILED
em đã thử mấy file rồi vẫn bị thế :(( ai giúp e với
