1650 mất nguồn lạ

Bản in

07-04-2009, 11:20
thientai9999

1650 mất nguồn lạ

máy 1650 dang sài bình thuòng tự nhiên mât nguòn bo vào mái kích cũng ko có dòng nạp flash cung ko duoc mong các bác giúp dở thank
07-04-2009, 11:23
ThienKim GSM™

Kẹp dòng có nhích ko mà FLASH nếu ko nhích kim cần xem lại con UPP bạn nhé
07-04-2009, 21:12
Bkis.Tranvanvu

kiểm tra chân bin xem sao ,rồi đá 2 con tụ gần chân bin xem sao
13-04-2009, 09:26
chieuNK

kiểm tra chân bin .đóng ic nguồi lại
21-07-2009, 23:04
ongquan_cd2005

kiêm tra công tăc nguôn thư xem
22-07-2009, 10:27
VŨ PRO

Trích:

Được post bởi ongquan_cd2005

kiêm tra công tăc nguôn thư xem

con này cần giúp đỡ vào ngày 7 tháng 4 đó anh. lâu quá rồi
22-07-2009, 14:15
phone7777

ches không dc thì kiểm tra ic nguồn đi, còn flash không dc thỉ xem lai cpu. chúc thành công:D
22-07-2009, 17:23
nhanvnn

mình đã gặp con này rồi, nhưng của mình kẹp nguồn vẫn nhích. minh thay hẳn cpu rồi flash cho nó. ok đấy, bận thử làm như vậy xem, cpu nó chung với 1200,1208..
22-07-2009, 20:13
DUY_GSM

--------------------------------------------------------------------------------

kiêm tra công tăc nguôn thư xem
__________________
tren troi cao toi la vi sao le duoi tran gian toi la ke co 1650 lÀm gì có công tắc nguồn mà kiểm tra bạn
22-07-2009, 20:25
hanghuu

[QUOTE=truongduy;321997]--------------------------------------------------------------------------------

kiêm tra công tăc nguôn thư xem

Ủa 1650 có công tắc nguồn sao ta?:confused:
22-07-2009, 20:27
DUY_GSM

ko mình lộn post nhầm ý mình là 1650 làm gì có công tăc nguồn
11-08-2009, 17:28
texas

minh củng đã từng bị một con như vậy và mình đã thay cpu khác cho nó sau do minh nap pm với vơt cao thế là ok
11-08-2009, 17:46
mobileliem

bó tay, 1650 đới mới hả, làm gì có công tắc nguồn hả trời, bạn coi lại cpu hay ise nguồn đi đi, có lẽ bị hở rôi,
11-08-2009, 17:56
GSM_9x_ND

bài này người ta làm xong lâu rùi các anh ơi
11-08-2009, 18:10
nguyenchithan01

Trích:

Được post bởi truongduy

--------------------------------------------------------------------------------

kiêm tra công tăc nguôn thư xem
__________________
tren troi cao toi la vi sao le duoi tran gian toi la ke co 1650 lÀm gì có công tắc nguồn mà kiểm tra bạn

phát biểu linh tinh
:confused:
14-06-2011, 17:09
thuatnguyen25

em co key 1650 mat nguon em thu test bang JAF thi may bao nhu vay xin cac bac hay giup em voi em xin cam on truoc
Getting MCU ID
Incorect MCUID!
Causes:
1. Cable is not good -> check for 68k resistor b/w bsi-gnd in connector and 3.3k resistor in serial with bsi line

MCU ID: 0xFFFF
Can't find boot file...
Failed! Aborting!
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
PPM Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.80mq
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
PPM Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.80mq
CNT Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm3050_nai5.80mq
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
Booting phone...
Phone didn't answer with TX line low after UEM reset!
Causes:
1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
2. UEM damaged -> replace uem.
MCU ID: 0xDDDD
This MCU ID is not supported in chosen flash file...
Error booting phone...

em moi vao nghe cho em hoi them la 1650 co thay duoc CPU cua 2626 kho .cam on can bac nhieu
14-06-2011, 17:12
thuatnguyen25

em co key 1650 mat nguon em thu test bang JAF thi may bao nhu vay xin cac bac hay giup em voi em xin cam on truoc
Getting MCU ID
Incorect MCUID!
Causes:
1. Cable is not good -> check for 68k resistor b/w bsi-gnd in connector and 3.3k resistor in serial with bsi line

MCU ID: 0xFFFF
Can't find boot file...
Failed! Aborting!
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
PPM Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.80mq
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
PPM Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.80mq
CNT Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm3050_nai5.80mq
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
Booting phone...
Phone didn't answer with TX line low after UEM reset!
Causes:
1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
2. UEM damaged -> replace uem.
MCU ID: 0xDDDD
This MCU ID is not supported in chosen flash file...
Error booting phone...

cho em ho la 1650 co the thay CPU cua 2626 duoc khong
14-06-2011, 17:13
thuatnguyen25

em co key 1650 mat nguon em thu test bang JAF thi may bao nhu vay xin cac bac hay giup em voi em xin cam on truoc
Getting MCU ID
Incorect MCUID!
Causes:
1. Cable is not good -> check for 68k resistor b/w bsi-gnd in connector and 3.3k resistor in serial with bsi line

MCU ID: 0xFFFF
Can't find boot file...
Failed! Aborting!
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
PPM Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.80mq
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
PPM Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.80mq
CNT Flash file: D:\Flash NOKIA\FILE THU CONG\1650\rm3050_nai5.80mq
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: D:\Flash NOKIA\FILE THU CONG\1650\rm305_05.800
Booting phone...
Phone didn't answer with TX line low after UEM reset!
Causes:
1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
2. UEM damaged -> replace uem.
MCU ID: 0xDDDD
This MCU ID is not supported in chosen flash file...
Error booting phone...