1200 mất nguồn cần giúp.

Bản in

05-06-2010, 13:56
kienhoaimobile

1200 mất nguồn cần giúp.

e có cây 1200 khách đem t[í bảo đang dùng thì mất nguồn.e kẹp đồng hồ dòng ấn công tắc on/off kim chỉ hơi nhích 1 tý.cho vào hộp write flash nó báo vậy 1st Boot: Ok, DCT4, UPP: 2292 [Rh-99] [2.0.9.0]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
2nd Boot Error: 4
Platform: 3, Error Data:
B3 72 72 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Process Failed, Repowering Mobile
anh em nào gặp qua xin cho ý kiến.em chek thì máy báo1st Boot: Ok, DCT4, UPP: 2292 [] [2.0.9.0]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Rebooting Mobile
05-06-2010, 14:00
D&Dmobile

làm chân FLas đóng lại bạn ko dc thay luôn con khác
05-06-2010, 14:15
kienhoaimobile

còn bác nào có cao kiến j ko ạ?giúp e với
05-06-2010, 14:23
Ghost_Mobile™

nó lỗi flash rồi còn đâu .lắc lại đi.còn ko được thì thay con khác đảm bảo ok
05-06-2010, 15:28
THAIBINH_GSM

1200 chỉ có bị cpu là nhiều thui làm chân nó đóng lại cái đi
05-06-2010, 15:57
haiquynhmobile

Trích:

Được post bởi kienhoaimobile

e có cây 1200 khách đem t[í bảo đang dùng thì mất nguồn.e kẹp đồng hồ dòng ấn công tắc on/off kim chỉ hơi nhích 1 tý.cho vào hộp write flash nó báo vậy 1st Boot: Ok, DCT4, UPP: 2292 [Rh-99] [2.0.9.0]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
2nd Boot Error: 4
Platform: 3, Error Data:
B3 72 72 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Process Failed, Repowering Mobile
anh em nào gặp qua xin cho ý kiến.em chek thì máy báo1st Boot: Ok, DCT4, UPP: 2292 [] [2.0.9.0]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Rebooting Mobile

gỡ con nguồn ra là chân dán lại trước nếu không được thì mới bung CPU . 80% lỗi UEM
05-06-2010, 17:29
hankute

ban lam lai con flash di ko dc lam con cpu chat chan la 0k doa ban chuc ban thanh cong nha .............................
05-06-2010, 17:55
nguyendatpro82

mình nghĩ nên lắc nhẹ con Nguồn Và U trước đã! cẩn thận coi chung bị phù bo. nên lấy dao mổ nhọn chích nhẹ vào mặt sau trước khi khò!
07-06-2010, 20:04
thuatnguyen25

em co con 1200 bi cham sau ,em lam het cham roi cap nguon thi thay giao dong kim dong len dung yen khoang 2 day roi tra ve ,em thu tét bang JAF nhung duoc bao loi mong cac anh chi them giup em ,em chan thanh cam on ,em trich dan bao loi o duoi

JAF version 1.98.63
Detected PKEY: 90028E5E
Card life counter: 67.70%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.22.0
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-99\

Searching for default location of ini...
Checking path: \Products\RH-99\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-99\
Scanning ini files...
Checking path: \Products\RH-99\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-99\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_03.400
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_03.40aa
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh990_nai3.40aa
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,Dannish,Norwegian,Swedish
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_03.400
Booting phone...
Phone didn't answer with TX line high after power on!
Causes:
1. Phone don't power on -> Check cable
2. TX pin from phone don't make contact -> Check cable
3. UPP damaged -> change UPP
MCU ID: 0xAAAA
This MCU ID is not supported in chosen flash file...
Error booting phone..
07-06-2010, 20:20
ga_online

Trích:

Được post bởi thuatnguyen25

em co con 1200 bi cham sau ,em lam het cham roi cap nguon thi thay giao dong kim dong len dung yen khoang 2 day roi tra ve ,em thu tét bang JAF nhung duoc bao loi mong cac anh chi them giup em ,em chan thanh cam on ,em trich dan bao loi o duoi

JAF version 1.98.63
Detected PKEY: 90028E5E
Card life counter: 67.70%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.22.0
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-99\

Searching for default location of ini...
Checking path: \Products\RH-99\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-99\
Scanning ini files...
Checking path: \Products\RH-99\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-99\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_03.400
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_03.40aa
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh990_nai3.40aa
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,Dannish,Norwegian,Swedish
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_03.400
Booting phone...
Phone didn't answer with TX line high after power on!
Causes:
1. Phone don't power on -> Check cable
2. TX pin from phone don't make contact -> Check cable
3. UPP damaged -> change UPP
MCU ID: 0xAAAA
This MCU ID is not supported in chosen flash file...
Error booting phone..

xem lại cable đi bạn ,cable lỗi kìa .ko được thì đóng lại CPU là ok
07-06-2010, 21:33
nguyenviethung1990

Trích:

Được post bởi thuatnguyen25

em co con 1200 bi cham sau ,em lam het cham roi cap nguon thi thay giao dong kim dong len dung yen khoang 2 day roi tra ve ,em thu tét bang JAF nhung duoc bao loi mong cac anh chi them giup em ,em chan thanh cam on ,em trich dan bao loi o duoi

JAF version 1.98.63
Detected PKEY: 90028E5E
Card life counter: 67.70%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.22.0
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-99\

Searching for default location of ini...
Checking path: \Products\RH-99\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-99\
Scanning ini files...
Checking path: \Products\RH-99\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-99\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_03.400
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_03.40aa
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh990_nai3.40aa
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,Dannish,Norwegian,Swedish
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_03.400
Booting phone...
Phone didn't answer with TX line high after power on!
Causes:
1. Phone don't power on -> Check cable
2. TX pin from phone don't make contact -> Check cable
3. UPP damaged -> change UPP
MCU ID: 0xAAAA
This MCU ID is not supported in chosen flash file...
Error booting phone..

bạn chú ý ở dòng cuối kìa JAF nó báo lỗi do cáp hoặc CPU, trước tiên bạn nên kiểm tra cáp không phải cáp thì bạn đào CPU vậy là ok. mà bạn nện lập 1 topic mới đi
07-06-2010, 21:40
haiquynhmobile

(1. Phone don't power on -> Check cable
2. TX pin from phone don't make contact -> Check cable
3. UPP damaged -> change UPP
MCU ID: 0xAAAA
This MCU ID is not supported in chosen flash file... )

1_ check cable bạn thay cable khác

2_ (3. UPP damaged -> change UPP
MCU ID: 0xAAAA) làm lại CPU hoặc thay
08-06-2010, 08:12
thuatnguyen25

em cam on cac bac nhieu nhing em kiem tra lai capb ,lam lai ca CPU roi ma chi thay kim dong giao dong hon mot chut chu chang thay len nguon gi ca,dong may nay em con yeu tay wa mong cac bac chi them xem con cach nao nua ko a!
08-06-2010, 08:30
KHA_MOBILE67

làm chân cpu đóng lại đi bạn ơi..hok hết thì thay cup đi bạn rồi.nạp flash
08-06-2010, 09:00
ga_online

Trích:

Được post bởi thuatnguyen25

em cam on cac bac nhieu nhing em kiem tra lai capb ,lam lai ca CPU roi ma chi thay kim dong giao dong hon mot chut chu chang thay len nguon gi ca,dong may nay em con yeu tay wa mong cac bac chi them xem con cach nao nua ko a!

bạn cho vào BOX check +info chạy lại đi ,tiện quang cái log lên anh em xem giúp cho
07-07-2010, 14:49
thaison_hongngu

1200 bệnh lạ cần ae giúp đở.

em mới nhận một cây 1200 po zin ,mờ nguồn lên dùng được vài giờ thì tự động mất nguồn ,e đả chạy ct lại rồi nhưng vẩn vậy.rất mong được sự giúp đở của ae.
07-07-2010, 21:07
ngoctai_mobile8696

Trích:

Được post bởi thuatnguyen25

em cam on cac bac nhieu nhing em kiem tra lai capb ,lam lai ca CPU roi ma chi thay kim dong giao dong hon mot chut chu chang thay len nguon gi ca,dong may nay em con yeu tay wa mong cac bac chi them xem con cach nao nua ko a!

bạn đong upp chuẩn vào nó cũng khó chết mà,tiếp theo lắc nhe con láh phát ko được nữa thì đổ chân đóng lại mình đã từng gặp rồi
07-07-2010, 22:13
hachanyen

ko được đóng lại cu đi bạn ơi
08-07-2010, 13:19
thaison_hongngu

e nghe nói dòng này mà khò u là dể chết lắm,còn cách nào khác ko các a.
15-07-2010, 03:11
congcoc

em có con 1200 chạy hết mà không lên nguồn mong các pác giúp dỡ