em mới nhận con 1200 chết nguồn,kẹp dòng ko nhúc nhíc.em khò vô mên thì nó lên được chữ NOKIA rồi đứng im luôn,cũng ko có cả đèn bàn phím nữa.em chưa làm j định chạy pm thôi,bác nào làm qua rồi chỉ em zoi.thanks
Bản in
em mới nhận con 1200 chết nguồn,kẹp dòng ko nhúc nhíc.em khò vô mên thì nó lên được chữ NOKIA rồi đứng im luôn,cũng ko có cả đèn bàn phím nữa.em chưa làm j định chạy pm thôi,bác nào làm qua rồi chỉ em zoi.thanks
Vệ sinh bỏ vào nồi luộc cho em nó 1 xuất xem sao.không được chạy lại pm quăng cái log lên ae xem thử mới biết
vệ sinh sạch rùi chạy cho em nó 1 phát ! rùii quăng log lến ae xem
đợi em nha.giờ em chơi đột kích đã.bác nào chơi thì vào tự do 3 kênh 3 phòng 3 rồi vào bắn 33 với em.(^_^)!!
sac nhàn rỗi quá bạn có chơi fifaonlie 2 không nếu có thi pm nhé
đúng là hết nói nổi.chào thua.Trích:
Được post bởi xecgayhiep
Mình nhận 1 cây e900 màn hình cảm ứng mắc bệnh rất lạ.máy nge gọi bình thường nhưng cứ khi nào máy khóa bàn phím hoặc không để chế độ khóa thì khi tắt đèn màn hình là không thể bấm lên dc nữa nhưng gọi tới vẫn nhận cuộc gọi VÀ NGE GỌI LẠI như thường.mình đã mất cả buổi sáng để cài đặt lại và chạy lại phân mềm mà không dc.mình rất cần sự giúp đỡ của anh em.anh em ai gặp qua rồi thì cho mình xin cách giải quyêt nhé.máy trưa qua sửa chữa.mình chân thành cảm ơn anh em trước.
lập topic khác nhé đã spam rùi đó
Chạy file chuẩn ko được thì thay mấy em diot đường đènTrích:
Được post bởi binhminh86
log của em đây ạ.Getting MCU ID
MCU ID: 0x2292
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.800
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.800
PPM Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.80mr
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.800
PPM Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.80mr
CNT Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh990_nai5.80mr
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.800
Booting phone...
MCU ID: 0x2292
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x28882000
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_st_i.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x4B38; Loader chk: df
Loader is ready...
P-key nokia module version 01.02
MSID: 84DC1B0180F482D991DAA468DD
MSID decoded: 3E4EBAE900DB8157A9000000
FAID: 65F54397F5502733E38552F5
Operation took 0 minutes 17 seconds...
Erasing...
Found 5 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 013AFFFF...
Erasing area: 013B0000 - 013EFFFF...
Erasing area: 017C0000 - 017EFFFF...
Erasing area: 01FC0000 - 01FEFFFF...
Operation took 1 minutes 9 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 14 seconds...
Restarting MCU...
PPM: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.80mr
Booting phone...
Phone didn't answer to request flash routine!
Causes:
1. UPP damaged -> replace UPP
MCU ID: 0xEEEE
This MCU ID is not supported in chosen flash file...
Error booting phone...
giúp em đi các bác
xóa full nạp lại, không hết làm cpu lại nhé! chúc thành công!
có khi nào bị plas ko các bác
heeeeeeeeee con này đónglại cpu chạu mới wa không thì thau cpu lhác đi bị lỗi rồiTrích:
Được post bởi xecgayhiep
em đóng lại cpu, chạy lại thi log đây ạ.vẫn vậyGetting MCU ID
MCU ID: 0x2292
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 5.80
14-11-08
RH-99
(c) NMP
HW version: 2502
PCI version:
UEM version: 1328
UPP version: 8850
LCD version: WIN:MYKS:04
ST7507
PPM version: V 5.80
14-11-08
RH-99
(c) NMP
MR
ADSP SW version: V 5.80\n14-11-08\nRH-99\n(c) NMP\nmr
Production serial number: ILE720260
Product code: 0546885
Module code: 0203402
Basic production code: 0544418
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 353106025001007
IMEI spare to net: 3A 35 01 06 52 00 01 00
IMEI SV to net: 33 35 01 06 52 00 01 60 F8
Master Code: 3623050463
Failed reading simlock data...
Phone type: RH-99, Software version: 5.80, Language Pack: MR
User code: ÿ#
Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RH-99.ini
Saved INI not found, loading INI list...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\
Searching for default location of ini...
Checking path: \Products\\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.800
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.800
PPM Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.80mr
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.800
PPM Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.80mr
CNT Flash file: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh990_nai5.80mr
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Reading IMEI...
Reading IMEI data...
IMEI data corrupt...
Failed to backup imei...
MCU: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.800
Booting phone...
MCU ID: 0x2292
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x28882000
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_st_i.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x4B38; Loader chk: df
Loader is ready...
P-key nokia module version 01.02
MSID: 84DC1B0180F482D991DAA468DD
MSID decoded: 3E4EBAE900DB8157A9000000
FAID: 65F54397F5502733E38552F5
Operation took 0 minutes 12 seconds...
Erasing...
Found 5 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 013AFFFF...
Erasing area: 013B0000 - 013EFFFF...
Erasing area: 017C0000 - 017EFFFF...
Erasing area: 01FC0000 - 01FEFFFF...
Operation took 1 minutes 9 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 14 seconds...
Restarting MCU...
PPM: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh99_05.80mr
Booting phone...
MCU ID: 0x2292
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x28882000
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_st_i.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x4B38; Loader chk: df
Loader is ready...
P-key nokia module version 01.02
MSID: 849D458F0E1C9E4A279824024A
MSID decoded: 3E4EBAE900DB8157A8000000
FAID: C4223CE3DED96D6FDAF8A24B
Operation took 0 minutes 11 seconds...
Erasing PPM...
Found 2 interval(s) to erase
Erasing area: 01240000 - 0124FFFF...
Erasing area: 01250000 - 0137FFFF...
Operation took 0 minutes 22 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 7 seconds...
Restarting MCU...
CNT: D:\File phan mem NoKiA\Nokia-1200\1200_RH-99_v5.80\RH-99\rh990_nai5.80mr
Booting phone...
MCU ID: 0x2292
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x28882000
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_st_i.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x4B38; Loader chk: df
Loader is ready...
P-key nokia module version 01.02
MSID: 848D0D818D1250B7B069FB212A
MSID decoded: 3E4EBAE900DB8157AA000000
FAID: 6AFE936B55AB80614B2846CD
Operation took 0 minutes 12 seconds...
Erasing Content Pack...
Found 1 interval(s) to erase
Erasing area: 01380000 - 013AFFFF...
Operation took 0 minutes 3 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 1 seconds...
Restarting MCU...
Operation took 0 minutes 1 seconds...
Flashing Done!
Operation took 2 minutes 50 seconds...
After flash processing...
Waiting for phone to boot...
Reading...
Phone type: RH-99, Software version: 5.80
IMEI: 353106025001007
Product Code: 0546885
Resetting PPC...
Setting FULL FACTORY......Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 4 seconds...
Done!
Done!
Powering the phone...
Unlocking...
IMEI: 353106025001007
Failed! Aborting! Asic 00
Done!
Causes:
1. UPP damaged -> replace UPP
MCU ID: 0xEEEE
This MCU ID is not supported in chosen flash file...
Error booting phone...
em này của bác upp lỗi rùi kiếm con upp chuẩn thay vao ok thui chúc vui
Lấy băng keo dán chân vpp rồi flash lại là ok liền.
em đem cho 1 cao thủ pm chạy thì lên được chữ contarsever va có cả đèn bàn phím.thấy bảo lỗi u.chắc phải thay quá.
thay con upp đi xem thế nào anh.