1200 chạy pm báo lỗi

nhờ ae xem hộ con 1200 này với.máy mất nguồn e flash thì báo ntn xin ae giúp
MCU ID: 0x2292
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: BF FF BF FF BF FF BF FF BF FF BF FF BF FF BF FF
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\anhtuan\nokia\Products\rh-99\rh99_05.530
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\anhtuan\nokia\Products\rh-99\rh99_05.530
PPM Flash file: NONE
CNT Flash file: D:\anhtuan\nokia\Products\rh-99\rh990_nai5.53mr
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: D:\anhtuan\nokia\Products\rh-99\rh99_05.530
Booting phone...
MCU ID: 0x2292
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.4A.00 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: BF FF BF FF BF FF BF FF BF FF BF FF BF FF BF FF
Flash ID is 0x28882000
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_st_i.fia
Loader version: 04.4A.00 -> Revision: 0007
Loader size is 0x4C30; Loader chk: 39
Loader is ready...
P-key nokia module version 01.02
MSID: 84EC1AC57D670BE72178F37EE3
MSID decoded: 3E4EBAE900001A28A9000000
FAID: 10B929343CC6950EE251CBC7
Operation took 0 minutes 9 seconds...
Erasing...
Found 5 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 013AFFFF...
Error erasing area: 011F0000 - 0120FFFF

Chết con upp

kiểm tra con flash đá nhe xem có được không