xin giúp 1202 chạy bằng mxkey

em chạy chú 1202 thay cả nguồn và flash rồi cả upp luôn. cho vô mxkey chạy máy báo lỗi này là gì? các bác chỉ giáo giùm em với. em xin cảm ơn

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9005(07-11-2010), 1.0.0.14948(07-11-2010)
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 00EC 2268 [Samsung K8S3215ETE,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 006A9A2F:DA3BDA66
ASIC type: 11
UEM Imei: 35193203763824
Processing MCU file: rh112_004.030
[DCT4,DCT4 ALGORITHM] size: 2.29 MB
Supported Ids: 2293
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 00EC 2268 [Samsung K8S3215ETE,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 006A9A2F:2984DA60
Area [01000000-0100FFFF] erased in 0.422 s
Area [01010000-013AFFFF] erased in 23.969 s
Area [013B0000-013EFFFF] erased in 1.563 s
Area [017C0000-017EFFFF] erased in 0.109 s
Area [01FC0000-01FEFFFF] erased in 0.109 s
Flash programming ...
Error while programming [14] at 0x01000000, Result: 0872
flashing terminated !
Flashing terminated with error(s) in 3 min 24.750 s
RX Buffer: 0872

thay cáp khác chuyển sang box khác flash lại đi

đẻ em làm cái coi sao. tk bác nhiều

Getting MCU ID

MCU ID: 0x2293
FLASH ID0: 226800EC <=> SAMSUNG (SEC) -> K8S3215ETE Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
PPM Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.00md
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
PPM Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.00md
CNT Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh1120_nai03.00md
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
Booting phone...
MCU ID: 0x2293
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 226800EC <=> SAMSUNG (SEC) -> K8S3215ETE Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Flash ID is 0x6822EC00
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_amd.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x7528; Loader chk: 50
Loader is ready...
P-key nokia module version 01.02
MSID: 84A85DAA0BB2EC275BCCBD2A70
MSID decoded: 3E4EBAE9006A9A2FA8000000
FAID: FDCAD06ECF44D01914320FA2
Operation took 0 minutes 6 seconds...
Erasing...
Found 5 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 013AFFFF...
Erasing area: 013B0000 - 013EFFFF...
Erasing area: 017C0000 - 017EFFFF...
Erasing area: 01FC0000 - 01FEFFFF...
Operation took 0 minutes 25 seconds...
Writing...
Error cmd: 14!
Addr: 01000000

em đưa qua jaf chạy đên đây là đứng chờ hoài là sao ạ? híc em mới làm phần mềm nên mong các bác chỉ giúp

Getting MCU ID

MCU ID: 0x2293
FLASH ID0: 226800EC <=> SAMSUNG (SEC) -> K8S3215ETE Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
PPM Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.00md
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
PPM Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.00md
CNT Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh1120_nai03.00md
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
Booting phone...
MCU ID: 0x2293
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 226800EC <=> SAMSUNG (SEC) -> K8S3215ETE Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Flash ID is 0x6822EC00
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_amd.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x7528; Loader chk: 50
Loader is ready...
P-key nokia module version 01.02
MSID: 84A85DAA0BB2EC275BCCBD2A70
MSID decoded: 3E4EBAE9006A9A2FA8000000
FAID: FDCAD06ECF44D01914320FA2
Operation took 0 minutes 6 seconds...
Erasing...
Found 5 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 013AFFFF...
Erasing area: 013B0000 - 013EFFFF...
Erasing area: 017C0000 - 017EFFFF...
Erasing area: 01FC0000 - 01FEFFFF...
Operation took 0 minutes 25 seconds...
Writing...
Error cmd: 14!
Addr: 01000000

em đưa qua jaf chạy nó báo vậy rồi. em mới chạy phần mềm nên mong các bác chỉ giùm

thay cpu đi anh,,không dc thay flat ok.than

PHP Code:

---

Writing...
Error cmd: 14!
Addr: 01000000 


---

lỗi cpu rồi thay con khác rồi flash nha

1202 mà kiếm cpu cũng hơi bị khó. nên cẩn thận vì cpu 1202 rất dể chết đấy bạn

thay cpu 1200 và chay bàng hwk ok