anh em dúp 8800 rm 13 nạp phần mêm bị lổi check ok info không được nạp báo lổi log
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9100(23-12-2010), 1.0.0.15151(24-12-2010)
ASIC ID: 0x1052 [TikuEdge ver: 1.1]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22F8 [Samsung K8S2815ETA,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0020 [Samsung KFM1216Q2M,512 Mbits] type: NAND hw: EIJA(E)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: te_amd.fia [TIKU ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x84D8
Supported Ids: 1051, 1052, 2051
Performing Flash Authentication ...OK
UEM ID: 001F8A53:3B8ADA60
ASIC type: 6
UEM Imei: 35664100155413
Flash Imei: 35664100155413
RPL saved to "C:\mobileEx\3.4\data\backup\RPL\35664100155413_BA CK.rpl"
Processing MCU file: rm13_33_11004.170
[TIKU BT2,TIKU ALGORITHM] size: 9.87 MB
Supported Ids: 1052, 2051
ASIC ID: 0x1052 [TikuEdge ver: 1.1]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22F8 [Samsung K8S2815ETA,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0020 [Samsung KFM1216Q2M,512 Mbits] type: NAND hw: EIJA(E)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: te_amd.fia [TIKU ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x84D8
Supported Ids: 1051, 1052, 2051
Performing Flash Authentication ...OK
UEM ID: 001F8A53:092EDA60
Area [00000000-0000FFFF] erased in 0.641 s
Area [00010000-009FFFFF] erasing ...
Error while erasing 0x00150000-0x0016FFFF, Result: 04000000
flashing terminated !
Flashing terminated with error(s) in 1 min 14.141 s
RX Buffer: 0400000000B172
báo như vậy đó thử chạy jaf như vậy luôn
