Infinity `SM` software v1.11 released
Service - added Read CRT function for MTK based phones (need Root)
Service - added Bacup SEC function for MTK based phones (need Root)
Installer has two parts:
- InfinityBox_install_SM_v1.11
- InfinityBox_update_SM_ResourcePack_v1.09 (old one). If you have Resource Pack installed earlier you do not need to download and install it again
Download link
Chinese Miracle-2 MTK/Mediatek v2.00 - new CPU support, new features, new options
MTK 6570 CPU support:
with NAND memory
with eMMC memory
Read Info - Complete device info, Security info
Read Firmware - Factory Scatter format [ NAND supported - WorldFirst and unique! ]
Write Firmware - Factory Scatter Format [ NAND supported - WorldFirst and unique! ]
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6750 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6755 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6757 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6763 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6797 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
--- Under Test ---
MTK 6758 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6739 CPU support:
with NAND memory
with eMMC memory
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
Main
- New look and design. All simplified and optimized much, as possible. [ please refer to v2 interface introduction ]
- New core. All code made from scratch.
- New boot chain selection mode - automatic ( via defined user combination ) or manual.
- New connection
- Complete error handling and explanation
- Internal EMIDB cover 99% of existing memory devices on both - NAND and eMMC devices
- Easy end user customization for adding support for new device etc.
Flasher
- Completely new flasher design, which allow customize whole flashing process [ please refer to v2 interface introduction ]
FW Reader
- Completely new core, which allow handle all existing types and flash devices.
Service
- Security repair NOT require reboot to meta, not required CDC drivers or whatever else. All direct.
- Format FS include different mode, optimized for different secure devices type ( with FORMAT, WRITE protection )
- During NVRAM read/write SW also verify it condition and data
MEMORY TOOL activated!
Easy, fast and ultimate solution now come in MTK too!
- Support eMMC and NAND flash IC secure
- Allow READ, WRITE, ERASE partitions
- Show partitions states and info only for eMMC devices
- Allow RE-init PMT ( from scatter )
Other
Lot of other changes from v1 line, which not mandatory to mention
Known issues/warnings/info:
1. [NAND on MT6570] v1712, v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
1. [NAND on MT6570] UBI SPARSE image flashing may take MUCH time (up to 5 minutes and more) for some devices!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-write data, which you want, ignore "EMPTY" states.
4. [MEMORY TOOL] Old protocol secure devices (MT6750/MT6755) - LeEco and similar
In some cases WIPE partition may not work!
5. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND/eMMC devices! Result - stuck after system/userdata partition flashing
6. FileSyhstems flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
7. Device with NV_TYPE2 security may not work yet for repair sec!
Download link
Chinese Miracle-2 MTK/Mediatek v2.00 r2 - MT6739 support, SPUnlock and more
As we told earlier, it was found some kind of problems with v2.00 at some PC and some hardware configuration. Current release should help to fix it. More details please see here - Chinese Miracle-2 MTK/Mediatek v2.00 - new CPU support, new features, new options - GSM-Forum
More details about current release:
- Main
MT6739 CPU supported!
MT6739 moved from TEST to GENERAL support.
Firmwware read
Firmware write
NVRAM read
NVRAM write
Reset Settings / Format FS
Reset FRP
Reset Privacy
MemoryTool
- MemoryTool
Fixed PMT init on some devices
Optimized Expand/Collapse view functions
Fixed DA1804 and DA1712 loaders support for WIPE
Optimized NAND support
- Service
NVRAM module updated
.dynamic page detection
.some types support fixed
.repair security ( security type detection ) updated
FormatFS / Reset settings rebuild
.Activated fully automatic "FULL FACTORY" mode, designed for all modern devices ( include devices with SEC_CONTROL )
."FULL FACTORY" mode set to default
.Some "OLD" agents (DA15xx) may not work
- SP Unlock activated
Support all MTK modern phones, except MT6763 and MT6739.
Read codes and Direct Unlock mode supported
MT6570 eMMC ONLY devices supported
- Core
Fixed memory leak issues and problems with booting on some systems
Optimized different OLD agents support for MODERN devices ( DA16xx and DA17xx line )
SW more faster now
EMI handler for MT6570 and MT6797 fully automated and complete
Improved EMI lookup support for MT675x devices
EMIDB updated
Hint/Error explain module updated
MT6758 support under test
MT6771 support under test
- Flasher
Fixed break issue, when just one file selected for flashing.
HWInfo compatibility status shown in log in both cases ( succes or failed )
- FW reader
MT6739 support
New types of firmwares supported
Optimized NAND reading on DA18xx line loaders
Read Firmware size now shown in log
- New models included
Limited MEIZU support
Limited Oppo support
Limited Gionee support
Limited BQ support
Some basic "generic" secure devices support optimized
Known issues/warnings/info :
1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-Write data, which you want, ignore "EMPTY" states.
4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
Download link
Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features
Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826
RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826
Flashing protocol updated
Updated LOD tools ( flashing / customizing )
Spreadtrum SC6533/G:
Protocol updated
Support for REV2 bootrom mode activated
FW reading revised
Updated LOD tools ( flashing / customizing )
Spreadtrum SC6530/6531/A/C/E:
Revised Repair security feature
Flashing revised
-> Activated "Format FFS" during BINARY dump writing
-> Use that feature, if device not allow make direct format ( some C/E revision devices )
User code read revised - activated 2nd mode : from DUMP
-> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code.
Activated AUTO fixer for memory dumps
Internal loaders updated
Spreadtrum other:
Protocol updated
PAC handling revised
Improved Flashing procedure for SC7701/SC7702 devices
Improved Flashing procedure for SC6825/SC8825 devices
Known issues[*]/warnings[!]/info[I]:
1. [I] AUTO fixer for memory dumps
-> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout )
-> Just select binary dump in flashing tab or any other operation, which require file select.
2. [*] In some cases Format FFS may fail on E and C rev
-> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS.
Download link
Infinity `SM` software v2.00 released
Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
`SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.
Infinity `SM` software v2.00 news:
- many internal stability improvements
- FRP unlock engine re-written
- FRP unlock procedure updated
- security area write for MTK based devices
- security area write for Exynos based devices
- Smart-Card firmware should be updated to use this software release
- "SM ResourcePack" should be installed to get all released functions working
At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.
List of supported models and features for previous software release - Infinity `SM` software - general information, models, functions etc. - GSM-Forum
Test reports are here - Success test reports with Infinity SM software - GSM-Forum
Download link
Infinity `SM` software v2.02 released
Service changes:
- Downgrade modem procedure released. This operation may be dangerus so use at own risk and only if you are really know you need it !
- rebuild Reset FRP procedure
Internal changse:
- a lot of changes related to use server functions
- bug fixes and internal improvements
Download link
Infinity `SM` software v2.00 released
Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
`SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.
Infinity `SM` software v2.00 news:
- many internal stability improvements
- FRP unlock engine re-written
- FRP unlock procedure updated
- security area write for MTK based devices
- security area write for Exynos based devices
- Smart-Card firmware should be updated to use this software release
- "SM ResourcePack" should be installed to get all released functions working
At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.
Latest released version: 2.03
Curent price: 70 Infinity credits
List of supported models and features for previous software release - Infinity `SM` software - general information, models, functions etc. - GSM-Forum
Test reports are here - Success test reports with Infinity SM software - GSM-Forum
Download link
Infinity `SM` software v2.04 released
Flasing - add Reset userlock / pin / pattern / password in FRP ON + OEM ON mode options
Many bug fixed
How to use Reset User lock options:
- see phone version in Recovery menu
- download COMBINATION file according to the phone version
- check checkbox and add your COMBINATION file
- flash phone
- after write COMBINATION file wait phone is turned on
- phone on in recovery mode, reboot phone
- you have access to phone data
after backup user data - reflash phone
Download link
Infinity Chinese Miracle-2 MTK/Mediatek v2.01 - LEGACY support and other features
Important:
- Software installed to new folder /CM2MT2/ and designed to support new models
Legacy core support activated:
MT6571
MT6572
MT6580
MT6582
MT6589
MT6592
MT6595
MT6597
MT6732
MT6735
MT6737
MT6752
MT6753
MT6795
MT8127
MT8163
MT8321
MT8732
MT8735
MT8752
Identify: full device info, security info
Flash Factory Firmware
Read Factory Firmware
Reset Settings / Format FS
Reset FRP
Repair Security (Flash Mode, Direct)
SP unlock
MemoryTool - complete device control, service, repair, forensic etc.
- Main
Loader database optimized, size reduced.
DA v1820 line support tested and activated
DA v1836 line support tested and activated
Connection level revised
BROM level support optimized
Optimized and changed HighSpeed port selection
FlashEngine revised
NVRAM tool revised
Global option PWM - allow switch SW between two different work modes for RAPHAEL.
> Use second one if first mode give errors at writing f.e. restore NVRAM on F5 like device etc.
> For LEGACY phone it used in MEMORY TOOL ( WRITE / WIPE )
- Service
Repair Security revised
> Old LEGACY types require FORMAT FS/FACTORY RESET for accept changes !
Format FS - new mode activated: Forced Erase
Format FS - fixed WIPE mode
- Core
EMIDB updated
New EMI engine for LEGACY line
> EMI engine support almost all existing LEGACY line
> New types for RAPHAEL included
- FW reader
LEGACY core supported ( unsigned and static signed types are supported )
New types of firmwares supported
Scatter creation optimized
- Other
Settings tab activated ( firmware path settings and other features can be found here )
AutoUpdate ( module files ) feature activated
Many other changes and fixes
Known issues/warnings/info:
1. FileSystem flashing on some SBC-enabled RAPHAEL devices (except SYSTEM/CACHE/USER) may fail ! Solution - exclude them from flashing list.
2. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list !
3. MT6589 supported ONLY up to DAv17xx line, after DAv1728 support has been removed.
4. MT6592 support on DAv18xx loader line broken ( DA issue )
5. EMI/DRAM init module in LEGACY line is almost auto, but in some case require CHANGE EMI setting, if used internal DB ( since much RAMsize/Revision of eMMC/eMCP )
6. MOST of LEGACY phone can be booted via BROM mode from now ( PLAIN, PRL, SBC )
7. NAND support on LEGACY line is not activated yet
Download link
Infinity Chinese Miracle-2 MTK/Mediatek v2.02 - new features, loaders, improvements
- Base
Base - Read info from EMI base (preloader) in manual mode after selection
Base - Info reading improved ( in some cases device info can be empty )
Base - Manual mode selection revised ( Boot fail issues in manual mode )
- MemoryTool
MemTool - Partition types detection improved
MemTool - Interface changes ( partition selection style changed, menu sctructure changed )
MemTool - work with boot1/boot2 section revised for LEGACY line
MemTool - InitPreloader option activated ( LEGACY/RAPHAEL )
MemTool - Flash service regions read/write now allowed ( if they not set as protected - i.e. OTP )
- Flasher
Flasher - Removed "Skip preloader" option, use selection instead ( untick preloader from flashing list )
Flasher - Customization model revised
Flasher - DL Fix / ADL Checksum revised
Flasher - Preloader initialization during flashing revised
Flasher - More accurate PMT/GPT rebuild, for compatibility with SPFT ( PMT invalid issues after servicing with MT2 module )
- Firmware Reader
FWReader - Scatter compatibility for spft optimized (6735, 6737)
FWReader - More types supported for safe read
FWReader - Info reading improved ( in some cases device info can be empty )
FWReader - SW path settings also accepted now on FW read
- Platform changes
Platform - MT6589 support optimized
Platform - MT6592 support optimized
Platform - MT673x support optimized
- Loader database
LoaderDB - New agents included ( BQ, TECNO, INFINIX, VIVO )
- Other
Other - Lot of small fixes and changes, reported by users
Thanks to : gracy_elec, kamal_singla and other our users for providing files and/or testing
Download link