thank duoc roi gan 50 lan moi duocTrích:
Được post bởi Chipsmobile
tat mo may vi tinh 45 lan luon muon chay may vi tinh luon
moi duoc
Lưu ý post bài tiếng việt có dấu nha bạn
thank duoc roi gan 50 lan moi duocTrích:
Được post bởi Chipsmobile
tat mo may vi tinh 45 lan luon muon chay may vi tinh luon
moi duoc
Lưu ý post bài tiếng việt có dấu nha bạn
anh làm được mà không ấn thank em 1 cái:D chán thế
ai mà làm theo cách của bác ấy mà ok thì thank you bác ấy một cái.
càc bác cho mình hỏi mình làm đúng như trên mà sao mình chạy ở chế độ usb mình chọn file ppm,cnt đều bình thường nhưng file mcu lại ko thấy gì hết trong khi chạy ở chế độ fbus thì chọn 3 file đều bình thường vậy? có phải máy tính mình bị lỗi ko vậy? xin lỗi vì đã spam
Làm như thế thật chưa anh là chưa làm ( giỏi spam :D)
P/s: chọn tự động không chọn bằng tay đcTrích:
Cáp phù hợp cho từng loại phone ví dụ DKU-2
Nokia_Connectivity_Cable_Driver_rel_6_85_10_0_eng. msi
Bản mới nhất download ở đây
Nokia PC suite Việt hóa
File gốc mà bạn muốn chạy ( Nguyên bộ .exe nhé)
Bây giờ chúng ta tiến hành
9300i của mình nó khởi động bị treo nên PCsuite khong nhận-->không chạy bằng DKU2 được, chạy bằng cáp 9300 thì nó báo lỗi:
MCU: C:\Program Files\Nokia\Phoenix\Products\RA-8\RA8_5500.1501
Booting phone...
MCU ID: 0x2142
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A0
Boot is ready...
FLASH ID0: 22FA00EC <=> SAMSUNG (SEC) -> K8S6415ETA Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0xFA22EC00
Flash loader is C:\Program Files\ODEON\JAF\Flash\m_amd.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x8130; Loader chk: 63
Error Loading loader!
mong các bác chỉ giáo thêm
thanks ban
kết hợp cả USB và F-BUS là ok test by meTrích:
Được post bởi hanbaoquan
em đang chạy bộ nbox,em nghe nói nbox có thể active lên jaf được phải ko các anh?vậy làm cách nào để nbox lên thành jaf dc vay
Trích:
Được post bởi longanh
* Bạn có thể Mua Thêm Pkey về setup Phần Mềm JAF lên rồi chạy Giao Diện JAF = N-BOX với Pkey
* Nếu hỏng có T thì lấy Pkey Crack về sai chung với N-BOX
Chạy bằng USB thì chỉ chạy được dòng BB5 bây giờ muốn chuyển chạy bằng FBUS thì làm như thế nào? Anh em chỉ giúp. Mình đang rất cần để chạy đời DCT4. Thank's
em chưa rõ lắm ở bước 10.mình cắm cáp vào và chọn chế độ pc sute ở đâu vậy anh?em cắm vào máy chẳng báo gì hết.em đã cài ok hết,chỉ có mỗi vậy thôi.AE giúp đỡ,thanks!
nếu mấy bạn còn sống thì bật nguồn lên thì PC Suite nó tự động nhận sau đó mở Tool Jaf lên chọn mục USB như Mod đả hướng dẩn là Flash , còn máy của bạn chết thì chọn thêm mục Dead USB sao đó chọn file + Flash + mở nguồn là được mặc dù lúc này PC Suite sẻ không báo phone nhưng vẩn Flash được , còn PC Suite ở đâu thì bạn down về Setup nó ra là có rồi nó nằm ở duới góc tay phải của bạn đó
nge các bác lói vạy em cung biết chút chút
mình đả làm theo hương dẫn nhưng khi ket nối lại báo như vâyậy:
JAF version 1.98.62
Detected PKEY: xxxxxx
Card life counter: 99.13%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
Detected P-KEY: 9001DE6F
P-key nokia module version 01.02
Init usb communication...
Found
Init usb flashing...
Error init usb flashing...
vậy là sao ???????????????
sau nhìu thời gian mò, cày bừa, đục đẽo, update cái thằng Nokia PC Suite lên bản mới nhất thì cho ra một thành quả rất ok:
Found CMT ULO server in flash file...
ADL->Loader: Update Application Loader -> Single Chip
Loader len: 245312, CHK: 0x9963
ADL -> Sending loader...
.................................................. .................................................. ............................
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 1577, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw...
Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
Erasing cmt zone 00020000 - 0007FFFF ... Erase result: 0000
Erasing cmt zone 00080000 - 000DFFFF ... Erase result: 0000
Erasing cmt zone 00100000 - 001FFFFF ... Erase result: 0000
Erasing cmt zone 00200000 - 0031FFFF ... Erase result: 0000
Erasing cmt zone 00320000 - 0105FFFF ... Erase result: 0000
Erasing cmt zone 01060000 - 01067FFF ... Erase result: 0000
Erasing cmt zone 01068000 - 0107FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_v...
Erasing cmt zone 01080000 - 015FFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_v_black...
Erasing cmt zone 01600000 - 01FDFFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Sending CMT HASH for PMM_CONF
Sending CMT HASH for SBIF_CONF
Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_v...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_v_black...
Writing 128k page converted flash...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: V 06.60
21-05-08
RM-217
(c) Nokia.
APESW: (null)
VariantSW: (null)
Prodcode: 0547991
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 0 seconds...
Done!
Done!
cho em xin phan huong dan su dung jaf bang tieng viet.thank truoc.
em có con 7210c kô có cáp chạy em chạy thử bằng jaf nhưng kô được chạy bằng mt box thì nó chạy nửa chừng đứng luôn giờ máy ngủ nguồn mất rồi , vậy cho em hỏi chạy dct4 bằng usb có được kô cách chạy nó thế nào các bác chỉ giúp em với tks!,
cần gì rùm gà,làm như mình nhé
1. Cài đặt PC suite
2. Cài đặt JAF 1.98.63 lúc nó hỏi có cài driver JAF thì chọn No nhé.
3.- Nếu máy die ( Hoặc máy còn sống nhưng vẫn muốn flash ở chế độ die phone ) cắm cáp vào chọn Manual FLash + Factory Set + Dead USB + Use Ini ( chọn file flash thích hợp) và ấn Flash, khi hiện chữ Init usb communication... thì ấn nút nguồn lên lúc này phone sẽ nhận với PC và tự driver va flash.
4- Bạn
làm lại b3 cái nữa la ok.Thân.
cho em hỏi, em dùng ufs chạy tool jaf crack có chạy đường usb được không
các bác co mình hỏi mình làm như hướng dẫn trên nhưng khi chọn phai MCU lại ko thấy gì nhưng PPM và CNT lại thấy bình thường vậy cá bác?
Trích:
Được post bởi duong le
* Lúc bạn mở file mcu nếu thấy không hiện file thì bạn bấm dấu * vào mục file name và bấm enter .
thanks bác! em làm theo bác ok rùi!:DTrích:
Được post bởi anhduongvn
Cảm ơn mọi ngơời đã hướng dẫn Có điều sau khi flash xong thì không có bộ sưu tâp mặc dù đã chạy đủ 3 file. Đây là log 3110c:
JAF version 1.98.61
Detected PKEY: 9000CA13
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.8.0
Changing mode...Done!
Detected P-KEY: 9000CA13
P-key nokia module version 01.02
Init usb communication...
Not found!!!
Detected P-KEY: 9000CA13
P-key nokia module version 01.02
Init usb communication...
Reading...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 9000CA13
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 9000CA13
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-237\
Searching for default location of ini...
Checking path: \Products\RM-237\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-237\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-237\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-237\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.ppm_mea2
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.image_mea2
APE Variant file: NONE
Languages in ppm: English,Arabic,French
Changing flashing settings...
Searching for default location of ini...
Checking path: \Products\RM-237\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-237\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.ppm_v
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.image_v
APE Variant file: NONE
Languages in ppm: English,Chinese T,Vietnamese
Backing up CRT...
Detected P-KEY: 9000CA13
P-key nokia module version 01.02
Init usb communication...
Failed to backup CRT...
Detected P-KEY: 9000CA13
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 02.33.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting.......................................... .......................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 1543, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.mcusw...
Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
Erasing cmt zone 00020000 - 0007FFFF ... Erase result: 0000
Erasing cmt zone 00080000 - 000DFFFF ... Erase result: 0000
Erasing cmt zone 00100000 - 001FFFFF ... Erase result: 0000
Erasing cmt zone 00200000 - 0031FFFF ... Erase result: 0000
Erasing cmt zone 00320000 - 0105FFFF ... Erase result: 0000
Erasing cmt zone 01060000 - 01067FFF ... Erase result: 0000
Erasing cmt zone 01068000 - 0107FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.ppm_v...
Erasing cmt zone 01080000 - 0151FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.image_v...
Erasing cmt zone 01520000 - 01FDFFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.mcusw...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Sending CMT HASH for PMM_CONF
Sending CMT HASH for SBIF_CONF
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.ppm_v...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.image_v...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
Phone not found...
Second try...
MCUSW: V 07.21
05-11-08
RM-237
(c) Nokia.
APESW: (null)
VariantSW: (null)
Prodcode: 0553807
Done!
Backing up CRT...
Detected P-KEY: 9000CA13
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
Failed! Aborting!
Failed to backup CRT...
Detected P-KEY: 9000CA13
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 02.33.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting.......................................... .......................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 1543, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.mcusw...
Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
Erasing cmt zone 00020000 - 0007FFFF ... Erase result: 0000
Erasing cmt zone 00080000 - 000DFFFF ... Erase result: 0000
Erasing cmt zone 00100000 - 001FFFFF ... Erase result: 0000
Erasing cmt zone 00200000 - 0031FFFF ... Erase result: 0000
Erasing cmt zone 00320000 - 0105FFFF ... Erase result: 0000
Erasing cmt zone 01060000 - 01067FFF ... Erase result: 0000
Erasing cmt zone 01068000 - 0107FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.ppm_v...
Erasing cmt zone 01080000 - 0151FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.image_v...
Erasing cmt zone 01520000 - 01FDFFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.mcusw...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Sending CMT HASH for PMM_CONF
Sending CMT HASH for SBIF_CONF
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.ppm_v...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-237\rm237__07.21.image_v...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: V 07.21
05-11-08
RM-237
(c) Nokia.
APESW: (null)
VariantSW: (null)
Prodcode: 0514950
Done!
Em chạy như hướng dẫn trên với con N70 nó báo log như vấy nhưng ko lên nguồn hiện chữ NOKIA đen thui ròi từ từ biến mất anh em ai biết nó bị lỗi j giúp em với mấy em lúc đâu bình thường
JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.8.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-84\
Scanning for ini files...
INI file .ini is missing. Continue searching for second ini type...
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.C0
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11
CNT Flash file: NONE
APE Variant file: ?
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50717301.C0
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50717301.C0
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50717301.C0
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50717301.C0
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11
CNT Flash file: NONE
APE Variant file: NONE
Backing up CRT...
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\357927007924122_CRT_backu p_121124.pm
Done!
Backup CRT OK!
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...05wk07v48.1 5.0737.3.0.1
Reading battery value...3808 mV
Init usb flashing...
Reading flashid...
CMT: 277E0001 <=> SPANSION -> Type not in database
APE: 003600EC <=> SAMSUNG (SEC) -> K5E1212ACM
Verifing ADL communication... Status byte 2
Scanning selected flash files...
ADL -> Loader: C:\Program Files\ODEON\JAF\Flash\ADLREVC00.adl
ADL -> Sending loader...
Loader sent...
ADL -> Loader: C:\Program Files\ODEON\JAF\Flash\ADLREVA00.adl
ADL -> Sending loader...
Waiting for the phone to boot...
Searching for phone...
Status byte: 0300
Phone is in flash mode...
CMT blocks: 308, APE blocks: 2254
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50717301.C0...
Erasing cmt zone 00000000 - 0052B515 ... Erase result: 0000
Erasing cmt zone 006A0000 - 006BFFFF ... Erase result: 0000
Erasing cmt zone 006DF000 - 006EFFFF ... Erase result: 0000
Erasing cmt zone 00700000 - 007EFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11...
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50717301.C0...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11...
Erasing ape...
Selecting APE flash...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50717301.C0...
Erasing ape zone 00000000 - 0000FFFF ... Erase result: 0000
Erasing ape zone 00010000 - 0001FFFF ... Erase result: 0000
Erasing ape zone 00020000 - 000203FF ... Erase result: 0000
Erasing ape zone 00050000 - 03ECFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11...
Erasing ape zone 01AE0000 - 02AFFFFF ... Erase result: 0000
Erasing ape zone 02B00000 - 03ECFFFF ... Erase result: 0000
Send APE CFG...
Writing ape...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50717301.C0...
Sending APE HASH for KEYS
Sending APE HASH for X-LOADER
Sending APE HASH for PRIMAPP
Sending APE HASH for SOS+LOADER
Sending APE HASH for SOS+XZIP
Sending APE HASH for PASUBTOC
ape->PAPUB_CERTIFICATE_DATA_BB5 block detected
ape->PAPUB_CERTIFICATE_DATA_BB5 block detected
ape->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
ape->PAPUB keys already sent...
Sending APE HASH for SOS*CORE
Processing C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V11...
Rebooting...
Finishing APE session...
Finishing CMT session...
Restarting CMT...
Restarting APE...
Pooling phone...
Phone not found...
Second try...
Phone not found...
Done!
dù sao củng cám ơn bạn rất bổ ich cho AE mới dùng JAF
phần mềm 7.21 của máy gì vậy bạn ơi. bạn phải nói rõ hơn mọi người mới biết đc mà giúp chớ . VD 7.21 cho 3110C hay 6300 BB5 hoặc DCT-4 vvvv.... ???
thank vì những cái đó của anh em bít thêm 1 cách chạy nữa đấy !
JAF version 1.98.64
Detected PKEY: 900266A7
Card life counter: 71.72%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.17.0
Changing mode...Done!
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Found
Init usb flashing...
Reading flashid...
CMT: 004000EC <=> SAMSUNG (SEC) -> KAT00F00RA
APE: 00000000 <=> Flash -> not detected
Done!
Searching for phone...Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Found
MCU SW version: V 07.90
10-07-09
RM-470
(c) Nokia
HW version: 2003
PCI version:
RFIC version:
DSP version:
LCD version: TPO
PPM version: V 07.90
10-07-09
RM-470
(c) Nokia
MR
BT MCM version: 410B-v170
Retu version: 34
Tahvo version: 00
Content Pack version: Content: mr_bd_chrome
V 07.90
10-07-09
RM-470
(c) Nokia
Production serial number: CAO274089
Product code: 0571234
Module code: 0204199
Basic production code: 0590482
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 358238034931364
IMEI spare to net: 3A 85 32 08 43 39 31 06
IMEI SV to net: 33 85 32 08 43 39 31 26 F4
LOCK STATUS:
CONFIG KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Loading INI list...
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Reading product code...
Product Code: 0571234
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-470\
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-470\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-470\
Scanning ini files...
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-470\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-470\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-470\rm470__07.90.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-470\rm470__07.90.ppm_v
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-470\rm470__07.90_ISM_013.image_v_vn_silver
APE Variant file: NONE
Languages in ppm: English,Chinese Simpl,Chinese T,Vietnamese
Done!
Backing up CRT...
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\358238034931364_CRT_backu p_923611.pm
Done!
Backup CRT OK!
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...07.90
Reading battery value...3870 mV
Init usb flashing...
Reading flashid...
CMT: 004000EC <=> SAMSUNG (SEC) -> KAT00F00RA
APE: 00000000 <=> Flash -> not detected
Verifing ADL communication... Status byte 7
Rebooting to flash mode...
Waiting for the phone to reboot...
Searching for phone...
Error reading phone init data...
Backing up CRT...
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
Failed! Aborting!
Failed to backup CRT...
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Error reading phone init data...
Changing mode...Done!
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Found
Init usb flashing...
Reading flashid...
CMT: 004000EC <=> SAMSUNG (SEC) -> KAT00F00RA
APE: 00000000 <=> Flash -> not detected
Done!
Searching for phone...Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Found
MCU SW version: V 07.90
10-07-09
RM-470
(c) Nokia
HW version: 2003
PCI version:
RFIC version:
DSP version:
LCD version: TPO
PPM version: V 07.90
10-07-09
RM-470
(c) Nokia
MR
BT MCM version: 410B-v170
Retu version: 34
Tahvo version: 00
Content Pack version: Content: mr_bd_chrome
V 07.90
10-07-09
RM-470
(c) Nokia
Production serial number: CAO274089
Product code: 0571234
Module code: 0204199
Basic production code: 0590482
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 358238034931364
IMEI spare to net: 3A 85 32 08 43 39 31 06
IMEI SV to net: 33 85 32 08 43 39 31 26 F4
LOCK STATUS:
CONFIG KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Loading INI list...
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Reading product code...
Product Code: 0571234
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-470\
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-470\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-470\
Scanning ini files...
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-470\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-470\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-470\rm470__07.90.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-470\rm470__07.90.ppm_v
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-470\rm470__07.90_ISM_013.image_v_vn_silver
APE Variant file: NONE
Languages in ppm: English,Chinese Simpl,Chinese T,Vietnamese
Done!
Backing up CRT...
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\358238034931364_CRT_backu p_926611.pm
Done!
Backup CRT OK!
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...07.90
Reading battery value...3892 mV
Init usb flashing...
Reading flashid...
CMT: 004000EC <=> SAMSUNG (SEC) -> KAT00F00RA
APE: 00000000 <=> Flash -> not detected
Verifing ADL communication... Status byte 7
Rebooting to flash mode...
Waiting for the phone to reboot...
Searching for phone...
Error reading phone init data...
Backing up CRT...
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
Failed! Aborting!
Failed to backup CRT...
Detected P-KEY: 900266A7
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Error reading phone init data...
LẦN NÀO CŨNG LÀM ĐẾN BƯỚC NÀY ĐỀU BỊ ZẬY HẾT.GIÚP MÌNH VỚI
anh nao chi cho em cach map loc 1202 voi
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-470Trích:
Được post bởi tinsonmobile24
Chon sai file CNT rồi cha nội, chọn lại là ok ah. Chúc may mắn
up cho cao thủ thấy nè
các huynh ơi, mình có cái 1661 bị mã bảo vệ. vậy mình có thể phá mã bảo vệ bằng USB không?
chạu băng usb có goo không vậy mình chưa thủ khi nào cả không biết có an toàn không pan thì chết mẹ
huhu, seo không ai giúp lính mới này vậy!Trích:
Được post bởi chauttc
sao mình thử mà không đương pc nhận đựoc máy rồi mà vào too ìo thì vẫn ero là sao vật các huynh ơi không chk dựoc luôn
ko đc đâu bạn ơi ! 1661 là DCT4 ko thể chạy qua usb đc ma` bạn, nhưng có thể phá mã bảo vệ bằng cáp cắm chân như 1110, 1200...., đấy bạn ak`, nếu gặp khó khăn gì qua yahoo: anhnet_gsm mình giúp đỡ cho. ok!Trích:
Được post bởi chauttc
sao toi thu mai ma van ko dc.ko nhan thiet bi may.ai bao toi voi
cảm ơn anh rất nhiều
em làm tành công rồi
chạy phà phà luôn
bản hướng dẫn như vậy thì anh em mới rễ hiểu chứ'