Nokia E71x chạy fw báo lỗi

Mình chạy bằng USB thì nó báo lỗi như sau

JAF version 1.98.66 beta5
Detected PKEY: 9000DB16
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.29.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-462\

Searching for default location of ini...
Checking path: \Products\RM-462\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-462\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-462\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-462\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-462\rm462_03.28_prd_core.fpsx
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-462\rm462_03.28_prd_v6000_01_piranha_att.fpsx
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-462\rm462_03.28_prd_rofs3erase.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-462\rm462_03.28_prd_vPI01_01_pi01.01.fpsx
Languages in ppm: English,Spanish,French,Portuguese
Backing up CRT...
Detected P-KEY: 9000DB16
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\356875022624113_CRT_backu p_137107.pm
Done!
Backup CRT OK!
Detected P-KEY: 9000DB16
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...08w35.03.28 03.28
Reading battery value...3776 mV
Init usb flashing...
Reading flashid...
CMT: 004000EC <=> SAMSUNG (SEC) -> KAT00F00RA
APE: 00000000 <=> Flash -> not detected
Verifing ADL communication... Status byte 7
Rebooting to flash mode...
Waiting for the phone to reboot...
Searching for phone...
Sending RAW loader...
Using 007.016.022
Elf2flash 09.07.000
CMT RAW loader...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting.......Error booting phone...


Là báo lỗi gì vậy, mình mới học nghề :D, thank

Trích:

---

....Error booting phone...

---

bạn thử bằng cáp ốp lưng xem sao. nó không boot chuẩn kìa

Có MT-BOX chạy con này chắc cú nhất.

Nếu bạn rành phần mềm Phoenix flash nokia flash cực chuẩn ko cần dùng box flash cũng ok dùng bản Cracked có người post rồi,bạn nên seach lại tìm xem

báo lổi file CMT mà mấy pro .
phần cứng rùi ,pác thử làm lại cho flash đi pác (làm thật kỹ nhé )

Trích:

---

Được post bởi HungPhongBR

Nếu bạn rành phần mềm Phoenix flash nokia flash cực chuẩn ko cần dùng box flash cũng ok dùng bản Cracked có người post rồi,bạn nên seach lại tìm xem

---

Thank bạn, nhưng mình dùng Phoenix nokia như bạn nói rồi mà nó vẫn báo Simcard Not valid, máy này xách tay từ Mỹ về
Khi chạy bằng Phoenix nó co log như sau :

Flashing started
Creating product data items list
Product data items list created
Backup not required
Started product mode change
Product mode change complete
Flashing phone
Initializing
Asic CMT: Verifying communication to device...
Getting product info...
Scanning image files...
Failed to open RAW connection
Loading secondary boot code: 14784 bytes
Secondary boot loaded
Loading update server code: 1991782 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Asic CMT: Start programming 89028 KB...
Asic CMT: Partitioning rm462_03.28_prd_core.fpsx
Asic CMT: Partitioning area 1...
Asic CMT: Erasing rm462_03.28_prd_core.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing partition 0x0000000A...
Asic CMT: Erasing rm462_03.28_prd_v6000_01_piranha_att.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing rm462_03.28_prd_vPI01_01_pi01.01.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing rm462_03.28_prd_rofs3erase.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing rm462_03.28_prd_udaerase.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming rm462_03.28_prd_core.fpsx
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming 8%
Asic CMT: Programming 10%
Asic CMT: Programming 12%
Asic CMT: Programming 14%
Asic CMT: Programming 16%
Asic CMT: Programming 18%
Asic CMT: Programming 20%
Asic CMT: Programming 22%
Asic CMT: Programming 24%
Asic CMT: Programming 26%
Asic CMT: Programming 28%
Asic CMT: Programming 30%
Asic CMT: Programming 32%
Asic CMT: Programming 34%
Asic CMT: Programming 36%
Asic CMT: Programming 38%
Asic CMT: Programming 40%
Asic CMT: Programming 42%
Asic CMT: Programming 44%
Asic CMT: Programming 46%
Asic CMT: Programming 48%
Asic CMT: Programming 50%
Asic CMT: Programming 52%
Asic CMT: Programming 54%
Asic CMT: Programming 56%
Asic CMT: Programming 58%
Asic CMT: Programming 60%
Asic CMT: Programming 62%
Asic CMT: Programming 64%
Asic CMT: Programming 66%
Asic CMT: Programming 68%
Asic CMT: Programming 70%
Asic CMT: Programming 72%
Asic CMT: Programming 74%
Asic CMT: Programming rm462_03.28_prd_v6000_01_piranha_att.fpsx
Asic CMT: Programming 76%
Asic CMT: Programming 78%
Asic CMT: Programming 80%
Asic CMT: Programming 82%
Asic CMT: Programming 84%
Asic CMT: Programming 86%
Asic CMT: Programming 88%
Asic CMT: Programming rm462_03.28_prd_vPI01_01_pi01.01.fpsx
Asic CMT: Programming 90%
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Programming 100%
Asic CMT: Verifying communication to device...
USB Flashing succeeded.
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Started product mode change
Product mode change complete
Doing factorysets
Factorysets complete
Reading Dynamic Camera Configuration ID 1
Updating configuration of camera with ID 1
Dynamic Camera Configuration updating failed: 0x84167501 - AudioVisual: No configuration file matching the camera name string 86L10300010406260000 was found.
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.0
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 1 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Product flashing succeeded.


Vậy làm sao unlock nó đây?