1 số mã code cho các đời máy .

Phone's codes
Alcatel
Master Codes
- 25228352
- 25228353
- 83227423 (TH3/4,BH4,BF5,BG3,BF3/4..)
###337*07# - master reset (with SIM)
###847# - factory reset (with SIM)
Alcatel 835 formating - **0102#

Samsung
*2767*3855# - FULL E2P RESET
*2767*2878# - CUSTOM E2P RESET
#*7337# - UNLOCK
*2767*688# - UNLOCK
*#0523# - CONTRAST
*#9998*523# - CONTRAST
*#8999*8378# - Service Menu (X100)

Philips
#20021208# ok - 630 without SIM (erase flash)
*#7728*# - RSAV DONE
*#3849*# - ??? reboot
*#3851*# - ??? reboot
Philips 568 *01763*737381# - reset
Pantech
*01763*737381# - master reset (user data, user code) without SIM
*01763*8371# - SW version
*01763*6371# - UNLOCK
*01763*3641# - Menu

Panasonic
*01763*737381# - master reset (user data, user code) A100, A101, A102,G50, G51, G70, GD55..
*369#(*) - MENU
7, 4, 6, menu, menu - lock menu
*#9999# - 5 sec after power on - SW version (GD75, GD67, GD87..)
LG
2945#*# - service menu (code reset)(W3000 G5300 C1200 G7100...)
2945#(*)- hold (LG 500,600)
B1200 *+pwr, 6,6,8 Service Menu
B1300 *+pwr, 1,5,9 Service Menu
Security Removing Code For Lg 8110,8120.
47328545454#
Or
277634#*#

Sony-Ericsson
> * < < * < * - Service menu

< * * < - Lock menu

VK Mobile
*#79# - SW version
*#85*364# (*) - hold menu
855855# without SIM (VG107)
85558555#(*)-hold
4268#(*)-hold (VG207)

Voxtel
0124 - master code
0718#(*)- hold - menu (ST11, SC10, V100 without SIM)
4268#(*)- hold - show code (ST11, SC10 without SIM)
*789(#)- hold - menu (V50, V300, RX100 without SIM)

Motorola
(T190, T191, T205) master code
- 19980722
- 20010903
**********
P2K test menu:
*#06#, menu, menu, 048263*
Test comands:
32*116*1*0*0 - read phone code
32*118*1*0*0 - read security code
18*0 - factory reset, phone code off
18*1 - master reset
54*18*1 - full phone reset
10*0*6 - select 900/1800
32*279*1*0*8 - model
32*383*1*0*0 - flex version
Hard reset MPX200, MPX220 - blue button + power on

Nokia
*#7370925538# (valet code reset) 6230
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]

Fly Bird
S688 - #*301#02# send - with SIM
menu:
7 - 10 - ok,
#*8000#, #*3676# (reboot repair)
V09, S1180 - *, 3 times down, 3 times up - service menu

Enol
*#987*00# - Service menu
*#987*99# - Full reset
*#900# - SW version

Maxon
*#9922# - menu, reset (without SIM)
*#9900# - Software Version
*#9901# - Software Version (PBatch)
S60 Siries (SX1, 6600, N-Gage..)
*#7780# - factory default
*#7370# - full factory defaults (all user data reset)
SX1 formating - * + # + power on
6600 formating - 3 + * + send + power on
Sendo X1 formating - 5 + power on

Mitsubishi
*65512890 (*-hold) format FFS (Eclipse)
* 3926 - (*-hold) test mode
* 5806 - (*-hold) SW version
*(hold) 787090 - trium 320 unlock menu

không có simen hả anh ơi

thank rat huu it

bạn có mã số của toshiba cdma A5511 cho mình xin với mình đang rat cần nó nè

vẫn còn thiếu nhưng dù sao cũng cảm on nhiều

nhìn chả hiểu j cac mã này công dung chưa bit nhưng cam on nhieu khi nao hoi sau hi`

Có lòng rất hay thanks..

Còn gì nữa không bạn? Thanks

được đấy bạn . Cứ vậy phát huy bạn nhé .

motorola w220
display problem
*#**367628#+send key master reset

*#**778337#+send key E2p reset


and other same code for all


O2x1
reset password *#9999#
Hang talk and power button together

[??]secret motorola mpx200 codes engineering menu, test mode, logs, etc.

Enter in the top secret 'Engineering Mode' on your MPx200 entering:
*#**364# on your keypad then press the Green Button

other interesting codes are:
* # * * 3 7 2 # FQC (test mode)
* # * * 3 6 4 # Engineering menu
* # * * 2 6 6 * 0 # Set as data COM port
* # * * 2 6 6 * 1 # Set as log COM port
* # * * 7 9 7 # Time to failure timer & Power down code
* # * * 2 2 6 3 * 0 # Set to default Band
* # * * 2 2 6 3 * 1 # Disable GSM Band
* # * * 2 a2 6 3 * 2 # Disable DCS Band
* # * * 2 2 6 3 * 3 # Disable EGSM and DCS Band
* # * * 2 2 6 3 * 4 # Disable PCS Band
* # 9 9 9 # which displays the command log
* # * * 8 3 7 # Version info (some roms doesnt have implemented)

Remember guys play at your own risk
<!-- / message -->


L6 i-mode Codes

--------------------------------------------------------------------------------

This Mitsibushi codes work with L6 i-mode

hold * 65512890 for reset
hold * 5806 sw version
hold * 487989 NS lock menu
hold * 482896 CP
hold * 574243 NS
hold * 967678 SP
hold * 362628 IMSI
hold * 787090 Lock net level
hold * 787292 Lock net level
TSM30

FULLRESET CODE
##*#9374 and press ok , b ::Service Codes::
##**9987 <OK>



Alcatel
Master Codes
- 25228352
- 25228353
- 83227423 (TH3/4,BH4,BF5,BG3,BF3/4..)

###337*07# - master reset (with SIM)
###847# - factory reset (with SIM)

Alcatel 835 formating - **0102#



Samsung


*2767*3855# - FULL E2P RESET
*2767*2878# - CUSTOM E2P RESET
#*7337# - UNLOCK
*2767*688# - UNLOCK
*#0523# - CONTRAST
*#9998*523# - CONTRAST
*#8999*8378# - Service Menu (X100)
For zv10 unlocking
*7465625*228#
Tested !




Philips

#20021208# ok - 630 without SIM (erase flash)
*#7728*# - RSAV DONE
*#3849*# - ??? reboot
*#3851*# - ??? reboot
Philips 568 *01763*737381# - reset


Pantech
*01763*737381# - master reset (user data, user code) without SIM
*01763*8371# - SW version
*01763*6371# - UNLOCK
*01763*3641# - Menu


Panasonic

reset(format) **7370# tryed and tested on my x700
*01763*737381# - master reset (user data, user code) A100, A101, A102,G50, G51, G70, GD55..
*369# - MENU

7, 4, 6, menu, menu - lock menu
*#9999# - 5 sec after power on - SW version (GD75, GD67, GD87..)

**7370#

**00012*00000000#
**00032*00000000#



LG
2945#*# - service menu (code reset)(W3000 G5300 C1200 G7100...)
2945#- hold (LG 500,600)
B1200 *+pwr, 6,6,8 Service Menu
B1300 *+pwr, 1,5,9 Service Menu

Security Removing Code For Lg 8110,8120.
47328545454#
Or
277634#*#
LG
2945#*# - service menu (code reset)(W3000 G5300 C1200 G7100...)
2945#- hold (LG 500,600)
B1200 *+pwr, 6,6,8 Service Menu
B1300 *+pwr, 1,5,9 Service Menu

Security Removing Code For Lg 8110,8120.
47328545454#
Or
277634#*#

U8180 old ...............49857465454#
U8180 new .............492662464663#
U8330 ...................637664#*#
U8360 ...................*6*41*12##
U8380 ...................525252#*#


ALL LG 2G : 2945#*#
8110 & 8120 : 277634#*#
U8130 & U8138 : 47328545454#
8180 old sw : 49857465454#
8180 new sw : 492662464663#
8330 : 637664#*#
8360 : *6*41*12##
8380 : 525252#*#

LG 8550 885508428679#*#
Phone
Service Menu Code

8110 277634#*#

8120 277634#*#

8130 47328545454#

8138 47328545454#

8180 v10A 49857465454#

8180 v11A 492662464663#

8330 637664#*#

8360 *6*41*12##

8380 525252#*#

8550 885508428679#*#

Phone
Unlock Menu Code

Older phones 2945#*88110#


U880
was told that unlocking code for the phone is "0794070061"
and method is to enter 142358#*#
but when i enter above code instead of asking for nck code it restarts(phone is temporary unlocked with sim inside).
Plz help how to unlock it permanently


After complete Flashing just Enter 142358#*#

Sony-Ericsson
> * < < * < * - Service menu

< * * < - Lock menu


VK Mobile

*#79# - SW version
*#85*364# - hold menu
855855# without SIM (VG107)
85558555#-hold
4268#-hold (VG207)



Voxtel
0124 - master code
0718#- hold - menu (ST11, SC10, V100 without SIM)
4268#- hold - show code (ST11, SC10 without SIM)
*789(#)- hold - menu (V50, V300, RX100 without SIM)



Motorola
c350 english languge
menu
setting
1 1 5 2 6
(T190, T191, T205) master code

- 19980722

- 20010903

**********

P2K test menu:
*#06#, menu, menu, 048263*

Test comands:
32*116*1*0*0 - read phone code
32*118*1*0*0 - read security code
18*0 - factory reset, phone code off
18*1 - master reset
54*18*1 - full phone reset
10*0*6 - select 900/1800
32*279*1*0*8 - model
32*383*1*0*0 - flex version

Hard reset MPX200, MPX220 - blue button + power on


Nokia
*#7370925538# (valet code reset) 6230
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]


Fly Bird
S688 - #*301#02# send - with SIM
menu:
7 - 10 - ok,

#*8000#, #*3676# (reboot repair)

V09, S1180 - *, 3 times down, 3 times up - service menu


Enol
*#987*00# - Service menu
*#987*99# - Full reset
*#900# - SW version




Maxon
*#9922# - menu, reset (without SIM)
*#9900# - Software Version
*#9901# - Software Version (PBatch)




S60 Siries (SX1, 6600, N-Gage..)
*#7780# - factory default
*#7370# - full factory defaults (all user data reset)
SX1 formating - * + # + power on
6600 formating - 3 + * + send + power on
Sendo X1 formating - 5 + power on




Mitsubishi
*65512890 (*-hold) format FFS (Eclipse)

* 3926 - (*-hold) test mode

* 5806 - (*-hold) SW version

*(hold) 787090 - trium 320 unlock menu




Huawei (cdma)

MASTER SECURITY CODE
-309296
-3092
-9296


Pantech HX-550C (cdma)

Full reset (phone code reset)- ##03*934#9367*192#397#7412569746 PWR,
after reset - ##27732726 PWR and select "with uim"





Samsung


#7465625*638*12345678#

::Service Codes::

Alcatel
Master Codes
- 25228352
- 25228353
- 83227423 (TH3/4,BH4,BF5,BG3,BF3/4..)

###337*07# - master reset (with SIM)
###847# - factory reset (with SIM)

Alcatel 835 formating - **0102#



Samsung
*2767*3855# - FULL E2P RESET
*2767*2878# - CUSTOM E2P RESET
#*7337# - UNLOCK
*2767*688# - UNLOCK
*#0523# - CONTRAST
*#9998*523# - CONTRAST
*#8999*8378# - Service Menu (X100)


Philips

#20021208# ok - 630 without SIM (erase flash)
*#7728*# - RSAV DONE
*#3849*# - ??? reboot
*#3851*# - ??? reboot
Philips 568 *01763*737381# - reset


Pantech
*01763*737381# - master reset (user data, user code) without SIM
*01763*8371# - SW version
*01763*6371# - UNLOCK
*01763*3641# - Menu


Panasonic

*01763*737381# - master reset (user data, user code) A100, A101, A102,G50, G51, G70, GD55..
*369# - MENU

7, 4, 6, menu, menu - lock menu
*#9999# - 5 sec after power on - SW version (GD75, GD67, GD87..)





Sony-Ericsson
> * < < * < * - Service menu

< * * < - Lock menu

j300 lcd reset

( -> *1*2*1* )

VK Mobile

*#79# - SW version
*#85*364# - hold menu
855855# without SIM (VG107)
85558555#-hold
4268#-hold (VG207)


VKMobile?

Code 1: *#85*364# (hold * key in few second) --> Enter the hidden menu
Code 2: 3807 # (hold * key in few second) --> Enter the test mode.


Voxtel
0124 - master code
0718#- hold - menu (ST11, SC10, V100 without SIM)
4268#- hold - show code (ST11, SC10 without SIM)
*789(#)- hold - menu (V50, V300, RX100 without SIM)



Motorola
(T190, T191, T205) master code

- 19980722

- 20010903

**********

P2K test menu:
*#06#, menu, menu, 048263*

Test comands:
32*116*1*0*0 - read phone code
32*118*1*0*0 - read security code
18*0 - factory reset, phone code off
18*1 - master reset
54*18*1 - full phone reset
10*0*6 - select 900/1800
32*279*1*0*8 - model
32*383*1*0*0 - flex version

Hard reset MPX200, MPX220 - blue button + power on


Nokia
*#7370925538# (valet code reset) 6230
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]

9210i formatting

remove the battary

Hold down Ctrl + Shift

put in the battary

keep waiting and holding the Ctrl + Shift

when you see the nokia hands logo press ( F )

Fly Bird
S688 - #*301#02# send - with SIM
menu:
7 - 10 - ok,

#*8000#, #*3676# (reboot repair)

V09, S1180 - *, 3 times down, 3 times up - service menu


Enol
*#987*00# - Service menu
*#987*99# - Full reset
*#900# - SW version




Maxon
*#9922# - menu, reset (without SIM)
*#9900# - Software Version
*#9901# - Software Version (PBatch)




S60 Siries (SX1, 6600, N-Gage..)
*#7780# - factory default
*#7370# - full factory defaults (all user data reset)
SX1 formating - * + # + power on
6600 formating - 3 + * + send + power on
Sendo X1 formating - 5 + power on




Mitsubishi
*65512890 (*-hold) format FFS (Eclipse)

* 3926 - (*-hold) test mode

* 5806 - (*-hold) SW version

*(hold) 787090 - trium 320 unlock menu




Huawei (cdma)

MASTER SECURITY CODE
-309296
-3092
-9296

Huawei ETS-668, 678, 688, etc Nam Programming:
Debug Mode: ##44+Menu
Debug Screen: ##33+Menu
CDG2 Test enable: ##234+Menu
CDG2 Test disable: ##432+Menu
China Lang Select: ##123+Menu
Blocking Debug Code: ###888+Menu
Home System Only On: ##461+Menu
Home System Only Off: ##460+Menu


Pantech HX-550C (cdma)

Full reset (phone code reset)- ##03*934#9367*192#397#7412569746 PWR,
after reset - ##27732726 PWR and select "with uim"



NEC

Repair please wait on NEC N2xx

*#3727372#
IMEI *#06#

Version * # 2820 #
hardware reset *73738# (send?)
Lock info * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock
SIM LOCK
*#4960 # (send?) - info
*4960*pass*pass#(send?) -lock
#4960*pass#(send?) -unlock

Lock Status * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock


*#CODE#
CODES :
06 IMEI
7468658 SIM INFO
746255 SIM INFO
7464674 IMSI
2820 SW WERSION
79837 SW + DSP WERSION
49837 ****************
79786 Checksum
28453 Build Levev
737425 SERIAL NUMBER !!!!
73738 -
737247 Reapir History
7463424 SIMM Diagnostics
284538 Build Date
84769 Power ON
497837 Hysteresis
3643278746 Enhanced speed
3648658746 3 Volt Sim
347722 Clear Cause
627538 Market
7320 Network Lock
4960 USIM Card Lock
3210 SP Lock
8140 Coorporate Lock
5830 Unlocking Code !!!
6210 MSISDN - Current Phone Number



TSM

To check lock type in TSM3/4/5/5m?
Turn ON the phone and type: *#9917#

To enter Unlock Code in TSM100?
Type: ****987 + Call

To Enter Unlock Code in TSM100v/TSM30?
Type: ##**9987 + Call


SHARP

sharp reset EEP

1, push at once key 0+3+right option key up+red key (white screen)
2, in sequence push key 0,1,2,3, right option key up,1 (service menu)
3, write 99 and push right option key up
4, write 01 and push right option key up (now start RESET EEPROM)
Wait.....
5, push any key
6, push blue key menu (save)
7, power off


Sharp GX-10 unlock solution

With Sim Card (of locked network) in phone:
*01763*6371# and press M.
In menu go to: SETTINGS->SELECT->SECURITY
then in Security menu:MEP LOCKS->SELECT
insert default security code 0000
In menu go to NETWORK and choose DEACTIVATE
press SELECT and insert 812664697614
Press OK, phone anwser will be: DONE .
phone unlocked

Sarp Gx15/20/30 Tm100

Phone is on test mode
you can see **** on phone display
For finishing unlock folow the next steps :
Press 1 on phone keypad
Press 99
Press right top key
Press 3 FOR UNLOCK
or Press 1 FOR FACTORY DEFAULT
Press roight top key
Wait to see on display format ok
Press right top key 3 times or more until phone is off




MAXON
for MAXON
*#9917#
#9917*network code#
#9917*part IMSI#
#9917*simlock SLPUK#
#9917*IMSI#

SG1000 Master Code Unlock 24681357
SG1000 Security Code Unlock *#*#1705#46 +ok (EEP reset)
this code is for enter in serviçe menu *#*#1705#


for innostream:
*741*7373868# reset ok

heck version *888*837#

Engineering Mode *888*888#

Master Reset *741*737381#

*741*737381#
*741*737382#






THOMSON


the code 49006045
AND TO ENTER CODE PUT 878 wit sim

Sony

Codes for the J-Series
*#06# : Displays IMEI number

*#00xx# : Changes language (xx is your country code)

*#000# ... *#0000000# : Resets language to auto-selection

*#7465625# = *#simlock# : Displays SIM lock status

*#7353273# = *#release# : Display firmware version

*#78737322867973738# = *#superfactoryreset# : Resets personal data (remove SIM card first)

*#73287489263373738# = *#securitycodereset# : Resets security code to 0000 (remove SIM card first)

*09*(PIN code)# : Turns PIN code on

#09*(PIN code)# : Turns PIN code off



Sagem

If you search here in the forum sure you will find the answer , this forum is really a big library then next time i suggest ti you to use the usefull search button.....
For example your IMEI is 35074635268234-2
take the four last digits without the 15th digit
you have 8234 ----> 8+2+3+4 = 17 modulo 10 = 7 then x =7
if your firmware is
DJ3,5C or DJ3,5D or DJ3,5E or DH3,5H then y=5
else if your firmware is
DF4,5E or DF4,5F or DH4,6J or DJ4,6G or DG4,5H or DI4,6G then y=4
else if your firmware is
JC3,6N or JC3,6O or JC3,6L then y=2
Now power on your phone without sim and put : *226632623XY and Ok
Salam


For the last time on this forum...

TEST MODE CAN'T BE ENTERED ON MYX3D, MYX5D, MIX5M, MYX6 SAGEM MODELS !!! SO STOP POSTING STUPID REQUESTS FOR TEST MODE CODE FOR THESE PHONES. STOP MYX6 UNLOCK CODE REQUESTS AS THERE IS NO CALC FOR IT YET AND PROVIDED FIELDS ARE UNUSEFULL.

TEST MODE CAN BE ENTERED ON MW/MC9XX, MW/MY30XX, MYX3, MYX5:

FOR MW/MC9XX:
*0287257X WHERE X IT'S AN NUMBER BEETWEN 0 AND 9

FOR MW/MY30XX:

WITH DX4,X FIRMWARE
*2266326234Y WHERE Y=LAST FOUR IMEI DIGITS(WITHOUT CHECK DIGIT) ADDED MOD 10. MOD 10 MEANS THE REST BY DIVISION OF 10.

WITH DX3,X FIRMWARE
*2266326233Y WHERE Y=LAST FOUR IMEI DIGITS(WITHOUT CHECK DIGIT) ADDED MOD 10. MOD 10 MEANS THE REST BY DIVISION OF 10.

FOR MYX3, MYX5:
*226632623XY WHERE Y=LAST FOUR IMEI DIGITS(WITHOUT CHECK DIGIT) ADDED MOD 10. MOD 10 MEANS THE REST BY DIVISION OF 10. X IT'S FIRMWARE DEPENDENT AND CAN BE A NUMBER BETWEEN 0 AND 9.

U CAN ACCESS FIEL 94 ? THAT'S PERFECT ! WRITE TO FIELD 94 VALUE 0X01 AND U'LL PHONE (M51 AND ABOVE MODELS) WILL BE IN PERMANENT TEST MODE.

best regards,
.:hack3r2k:.

Qantech
sp unlocking
*01763*737381#


CDMA Secrets And GSM Secrets

CDMA CODES
<<SAMSUNG>>
Samsung sph-n240, n400, a460, a500, etc Nam Programming :
Nam Set: ##Spc
Test Mode: 47*869#1235
Debug Menu: ##33284,ok
Service Menu: Menu+8+0 (#889)
Reset (Life time, Clear Memory, etc): ##786,ok
A-key: ##2539,ok
Label Selection: ##3882,ok
Label(Home, Work, etc) : **523,ok
NGG Setting (Gateway, etc.): ##2769737,ok
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok
Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming :
Nam Set: 47*869#08#9
Nam Set: Menu+60
Test Mode: *759#813580
Test Mode: 5809540*45680
A-key: Menu+0, 25##
External Audio: Menu+0, ####
Debug Menu: Menu+8, 0415 or Spc
Debug Menu: Menu+9, 0415 or Spc
Brief NAM Programing: Menu+40,626 (not all version)
LCD Contrast: Menu+45 (not all version)
SIO Mode: Menu+49
SIO Mode: Menu+69
Samsung a300, a530, a610, a620, a660, a670, etc Nam Programming :
Nam Set: Menu, 6, *
Nam Set: ##3238, ok
Nam Set: ##SPC (##000000), ok
Service Menu: Menu, 9, *
Test Mode: 47*68#13580
Test Mode: 47*869#1235
Samsung X, E, V, S-series (korean), e250, v420, s250, etc Nam Programming :
Nam Set: 6548#0**4#6
Nam Set: 47*869#08#9
Nam Set: 74153697193
Test Mode: 5809540*45680 (88 - efs clear)
Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415
Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415
Samsung N356 (India version) Nam Programming :
Test Mode: Menu, 5, down arrow, *
Test Mode: **00## (in some flashes)
Samsung i700, etc Nam Programming :
Nam Set: Go to start and select "PHONE" from the drop down menu, dial #83587
Samsung i300, etc Nam Programming :
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. Enter OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice
<<KYOCERA>>
Qualcomm qcp-800 Nam Pogramming :
Nam Set: Menu+3+0+Spc
Field Test: Menu+7+0+Fsc
Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming :
Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc
CAI Change: ##7738,ok
Enable TTY: ##889,ok
Life Timer, PRL, etc: ##786,ok
A-key: ##2539,ok
A-key: 2539,ok
Tips:
On some kyocera handsets the factory service module has not been disabled
and the phone can be programmed without the spc by inputting.
Nam Set: ##333333 menu (service)
<<SANYO>>
Sanyo 4900, 5150, 5300, 8100, etc Nam Programming :
Nam Set: ##Spc+Ok+Key Down+Ok
Advanced Setup: ##3282+Ok+Key Down+Ok+Msl
A-key: ##2539+Ok+Key Down+Ok
Version: ##**837+Ok+Key Down+Ok
Debug Menu: ##FSC+Ok+Key Down+Ok
Airtime menu: ##8463+Ok+Key Down+Ok
Change CAI: ##7738+Ok+Key Down+Ok
Vocoder: ##8626337+Ok+Key Down+Ok
Reverse Logistic: ##786+Ok+Key Down+Ok
Set IP Address: ##2769737+Ok+Key Down+Ok
TTY On/Off: ##889+Ok+Key Down+Ok
Ready Link: ##4636+Ok+Key Down+Ok
Browser Init On/Off: ##4682+Ok+Key Down+Ok
Picture Token: ##25327+Ok+Key Down+Ok
Unknown Code: ##5282277+Ok+Key Down+Ok
(SPC=000000, FSC=040793)
Sanyo scp-A011, smp-A017, etc Nam Programming :
Nam Set: F9(3 beep) + 0*72696#767
<<NOKIA>>
Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming :
Nam Set: *3001#12345#
Software Version: *#837#
Software Version: *#9999#
Esn Number: *#92772689#
Restart Phone: *#75681#
Restart Phone: *#75682#
Nokia 8887 Nam Programming :
Nam Set: *3001#12345#
Version: *#0000#
Evrc: *#8378#
Esn/Data/Timer: *#92772689#
SID: *#743#
Nokia 8587 Nam Programming :
Nam Set: *#626#7764726#
A-Key: #8159357022#4579# (26 digits)
A-Key: #8159357022#4547# (20 digits)
Version: *#0000#
Version: *#837#
Vocoder: *#3872#
Change language: Menu 5, 3, 1
Change DM mode: *#7678#
Debug Screen: *#8378#
Debug: *#8380#
Field Test Menu: *#83788#
SPC Unlock, Factory Reset :
Full Factory Reset: *#7370#
Resets all settings including non-user changeable items (like SPC)
NOKIA TEST MODE:
51xx, 61xx, 71xx, 3285, 63xx, etc :
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says "Field Test" and choose SELECT
3) Highlight "Enable" and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to "Field Test" choose SELECT. Press 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
"Field Test" choose SELECT. Press 0 0 and then choose OK.
3360, 6360 :
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says "Field Test" and choose SELECT
3) Highlight "Enable" and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
"Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.
<<AUDIOVOX>>
Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming :
(Power the phone on and wait until the little light on top goes out)
Nam Set: 289+fcn+#+1
Service menu: fcn+00+fsc(000000)
Test Mode: Hold (2,*,Rcl)+Power
Test Mode Commands:
99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code
129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range
Audiovox pcx-3500xl Nam Programming :
Nam Set: ##2726+Send+1998+1+Spc+1
Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming :
Nam Set: ##20022002+Pwr+1+Spc
Audiovox 8610, 8910, etc Nam programming :
Name Set: ##847446, end, 111111
Audiovox-107 Nam Programming :
Nam Set: 45680*47*869#1
Audiovox CMP-3 Nam Programming :
Nam Set: 45680*47*869#1
Dm Mode: Menu, 6, 6
Audiovox 9950 Nam Programming :
Nam Set: ##3282
Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming :
Nam Set: m + # + envelope key + * + 1
Audiovox Thera (Toshiba 2032) Nam Programming :
Thera Nam Programming User Manual - nam_thera.pdf
AUDIOVOX TEST MODE :
9100, 9155:
1) Turn on the phone. As soon the phone comes on and the green light
turns off press RIGHTARROW, 0, 0. The phone will ask for the
"FSC Code", press 000000 then choose OK and press RIGHTARROW,
RIGHTARROW. Your phone is now in test mode.
2) The signal strength is the number on the top right hand side of the screen.
3) To turn off test mode shut of the phone and then turn it back on.
<<MOTOROLA>>
Motorola 7760, 7860, 2260, 8160, etc Nam Programming :
Nam Set: Fcn,0000000000000, Rcl
Nam Set: 7466 3 #, Fcn, Fcn
Test Mode: Fcn, 00**83786633, Sto
Motorola v60c, v120c etc Nam Programming :
Nam Set: 74663#, Menu, Menu, Spc
Nam Set: Menu, 073887, * (type quickly)
Test Mode: Menu, 073887*, Spc
Debug Mode: ##33284
Force the phone into DIGITAL ONLY mode:
1) ##33284 (Debug)
2) RIGHT Softkey (Next) Twice
3) Down arrow 10 times to "PrefMod"
4) RIGHT Softkey (Change) until you see "DigOnly"
5) LEFT softkey (Exit)
6) MENU then LEFT Softkey return to idle screen
7) ##33284 (The last 4 will not display if you have done it correctly)
Motorola t182, c210, etc Nam Programming :
Nam Set: ##1111 end
Nam Set: ##298645665 end
Short Nam: ##073887 sto
Motorola v710, v730, v740, ms150, etc Nam Programming :
Nam Set: 8378*# + press 3 times NATE (spc - 071082)
Test Mode: Menu, 073887*, Spc
Service Menu: #758353266#646#
Motorola StarTac 2004 Nam Programming :
Nam Set: 5759789*#, rec key (3)times (spc - 915037)
Motorola ms200, ms230, etc Nam Programming :
Nam Set: 5759789*# (spc - 915037)
Motorola v6060 Nam Programming :
Nam Set:147*369#456*0#
Motorola Razr V3C Nam Programming:
Nam Set: 74663 # clr clr
Nam Set: #073887* , then SPC
MOTOROLA TEST MODE :
v60, c120, c331, etc:
1) Turn on the phone. Press MENU 0 7 3 8 8 7 *
2) The phone will require you to "Enter a Security Code", press 000000, OK
3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"
choose SELECT. Your phone is now in test mode.
4) Signal strength is the 3_rd number down on the left hand side of the screen.
5) To toggle between regular mode and test mode: Press MODE then
quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.
6) To turn off the test mode the phone must be in regular mode, then follow
the above sequence and scroll down to where it says "DISABLE" instead of
"ENABLE" and choose select.
Motorola Bible - bible.txt
<<LG>>
lgc-300, etc Nam Programming :
Nam Set: Menu, 9, Spc
A-key: Press "Sto" 3sec, 2539**
lgc-330w, etc Nam Programming :
Nam Set: Menu, 4, 0, Spc
A-key: 2539**
lgc-510, v111, etc Nam Programming :
Nam Set: Menu, 3, 0, Spc
A-key: 2539**
lgc-500, 800w, etc Nam Programming :
Nam Set: Menu, 9 , 0, Spc
Debug Mode: Menu, 7, 0, Fsc
Debug Mode: Menu, 8, 0, Fsc
A-key: 2539**
Lg LX,VX-series, VX4400, VX6000, etc Nam Programming :
Nam Set: ##Spc
Nam Set: Menu, 0
Advanced Settings: ##2342
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok
A-key: ##2539,ok
Reset (Life time, Clear Memory, etc): ##786,ok
<<SK TELETECH>>
Sky All Models Nam Programming :
Nam Set: #7583538324#626#
Nam Set: *759#364*7388464#
Min simple mode: #758353266#646#
Irm simple mode #758353266#476#
Voice memo: #8767#277#
Test Mode: #7583538324#8378#
A-key: #758353266#2539#
Service Menu: Menu+4+0+Spc
Service Menu: Menu+5+0+Spc
<<WITHUS / MODOTTEL>>
Withus wce-100, 200, 300, etc Nam Programming :
Nam Set: ##948487+Save
Nam Set: ##948482+Save
Nam Set: ##66835+Save
SMS Settings: ##76766
NVM Rebuild: ##777464
<<HYUNDAI>>
Hyundai hwp-110 Nam Programming :
Nam Set: #86904**89397#
DM Mode: ##2740*
(Open phone, inter code, close phone)
Hyundai hgc-120, 130, 200 Nam Programming :
Nam Set: #86904**89397#
Hyundai hgc-310, 600, 610 Nam Programming :
Nam Set: ##20022002+Pwr+1+Spc Code
Field Test: ##20022002+Pwr+1+Master Code
Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming :
Nam Set: ##20022002+Pwr+1+Spc Code
Field Test: ##20022002+Pwr+1+Master Code
A-key: 2539**
Debug Menu: ##27732726+Pwr
Sar Test: ##27752345+Pwr
Baud Rate: ##36**+Pwr
DM Mode Enable: **1004+Pwr
DS Mode Enable: **1005+Pwr
Test Bell/Voice/Led/Dot: ##1122+Pwr
RF Mode: ##2240+Pwr
Ras Ram: ##2774+Pwr
Cmux1: **0481+Pwr
Cmux2: **0482+Pwr
RX Mode Fax: **0492+Pwr
RX Mode Data: **0491+Pwr
RX Mode Reset: **0490+Pwr
<<HUAWEI>>
Huawei ETS-668, 678, 688, etc Nam Programming :
Debug Mode: ##44+Menu
Debug Screen: ##33+Menu
CDG2 Test enable: ##234+Menu
CDG2 Test disable: ##432+Menu
China Lang Select: ##123+Menu
Blocking Debug Code: ###888+Menu
Home System Only On: ##461+Menu
Home System Only Off: ##460+Menu
<<ERICSSON>>
Ericsson A1228c, T61, etc Nam Programming :
Short NAM: 987+Menu
Long NAM: 923885+Menu+Spc
CDMA Mode: 904093+Menu
Analog Mode: 904095+Menu
QNC: 904097+Menu
Debug Screen: 904090+Menu
DM Mode: 904050+Menu
Sony-Ericsson T608 Nam Programming :
Nam Set: 923885, Joystick to the right, 111111
<<EPSILON / COMPAL>>
Epsilon vc-5x Nam Programming :
Nam Set: **147258963##
Programming1: **1232580##
Programming2: **321456987##
Version: **1470963##
Debug: **000000##
Menu_1: **078987##
Menu_2: **1234756##
A-key: 2539**
Reset: **14789##
<<VK MOBILE>>
VK-100C, 110C, 200C, etc Nam Programming :
Nam Set: 153147539741593
Test Mode: 153147539123258 (88 - clear efs)
< <GIGA TELECOM>>
Z510, Z710i(gcd-456) Nam Programming :
Nam Set: Menu+0+Spc
<<AnyDATA>>
AMC450 Nam Programming :
Nam Set: *74269#*748#96148063+SEL
<<ZTE>>
ZTE C150 Nam Programming:
Nam Set: *983*3641#
<<GTRAN>>
Gtran gcp-2000 Nam Programming :
Nam Set: 01#737+Spc
Debug Menu: 01#324+Spc
Debug Mode: 01#727
Test Mode: 01#764+Spc
System Test Mode: 01#768+Spc
Gtran gcp-5000 Nam Programming :
Debug Mode: 01#727+Spc
Test Mode: 01#765
<<PANASONIC>>
PANASONIC TEST MODE :
Panasonic (Most):
1) Turn on the phone. Press #7764726# choose SEND
2) Scroll down to where it says "NAM 1" and choose OK. Scroll down
to "Access To Level 4" choose YES. Scroll down to "Built-In-Monitor"
and choose EDIT.
3) Press 1 and choose OK then choose BACK. The phone will say
"Back To Level 1" choose YES. Now choose EXIT the phone will ask you
"Exit And Save Change" choose YES.
4) Signal strength is the top right number on the screen.
5) To turn off the test mode follow the above sequence except press 0
instead of 1 at the "Built-In-Monitor"
<<SYNERTEK>>
Synertek S200 Nam Programming :
Nam Set: Menu+0+Spc
Debug Mode:
Test vibro/rx/tx: ##5555+Save
Debug Screen: ##33+Save
Debug Screen: ##523+Save
RF Test: ####+Save
Unknown code: ##325+Save
<<SONY>>
Sony CM-M1300, 3300, Z200 Nam Programming :
Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc
How to remove memory card Password
Click Here
GSM CODES
LG
To see version on LG 81X0
277634#*#
To enter unlock code :
2945#*88110#
IMEI (ALL): * # 06 #
IMEI and SW (LG 510): * # 07 #
software version (LG B1200 ): * 8375 #
recount cheksum (LG B1200 ): * 6861 #
factory test (B1200): #PWR 668
unknow (LG 500 ): 8060#*
unknow(LG 200 ) *789# + send
unknow (LG 500 ): 9270#* and 9278#*
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600 ): 2947#*
lg 5300 :2945#*5301#
how to read data calcfor LG510w:
just read button not read cal. data
adress: 0x1000004
size: 0x438
then read.
MAXON
*#9917#
#9917*network code#
#9917*part IMSI#
#9917*simlock SLPUK#
#9917*IMSI#
SG1000 Master Code Unlock 24681357
SG1000 Security Code Unlock *#*#1705#46 +ok (EEP reset)
this code is for enter in serviçe menu *#*#1705#
Mitsibushi
*#06# View IMEI
*#0044# English
*#0049# Deutsch
hold * 4329 Net Monitor1
hold * 621342 Net Monitor2
hold * 5472 M4 Testmode
hold * 5806 SW version
hold * 5807 HW version
hold * 936505 SW and HW version
hold * 482896 CP Lock Menu
hold * 574243 NS Lock Menu
hold * 967678 SP Lock Menu
hold * 362628 IMSI Lock Menu
hold * 787090 Lock net.level
hold * 787292 Lock net.level
Firmware Press and hold C, enter 597, release C
secret menu Press and hold C, enter 987, release C.Press OK
debug mode Press and hold C, enter 397, release C
phase-2 mode Press and hold C, enter 499, release C
Turn off phone Press and hold C, enter 999, release C
Motorola
*#06# Imei Number.
Motorola 8400 Secret Codes
IMEI Nummer *#06#
Telefonbuch“ aus dem Menü l?schen [],[],[],003,[],1,[] und “okay”
Telefonbuch“ im Menü hinzufügen [],[],[],003,[],0,[] und „okay“
Monitormodus [],[],[],113,[],1,[]
Monitormodus deaktivieren [],[],[],113,[],0,[]
Ausgangszustand [],[],[],070,[],0,[]
Motorola 8700 Secret Codes*
IMEI Nummer *#06#
Telefonbuch“ aus dem Menü l?schen [],[],[],003,[],1,[] und “okay”
Telefonbuch“ im Menü hinzufügen [],[],[],003,[],0,[] und „okay“
Monitormodus [],[],[],113,[],1,[]
Monitormodus deaktivieren [],[],[],113,[],0,[]
Ausgangszustand [],[],[],070,[],0,[]
Motorola T 2288 Secret Codes
IMEI Nummer *#06#
Motorola P 7389 Secret Codes
IMEI Nummer *#06#
Motorola L 7089 Secret Codes
IMEI Nummer *#06#
Motorola V 3688 Secret Codes
IMEI Nummer *#06#
Motorola V 3690 Secret Codes
IMEI Nummer *#06#
** Das Zeichen [] erhalten Sie, indem Sie die *-Taste l?nger gedrückt halten
NEC
IMEI *#06#
Version * # 2820 #
hardware reset *73738# (send?)
Lock info * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock
SIM LOCK
*#4960 # (send?) - info
*4960*pass*pass#(send?) -lock
#4960*pass#(send?) -unlock
pass is 8 digits

Lock Status * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock
code for repair n21 n22 n223
*#3727372#
Nokia
Nokia 1610 Secret Codes
IMEI Nummer *#06#
Software Version *#170602112302#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Nokia 2010 Secret Codes
IMEI Nummer *#06#
Software Version *#9999#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Nokia 2110 Secret Codes
IMEI Nummer *#06#
Software Version *#9999#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Nokia 2110e Secret Codes
IMEI Nummer *#06#
Software Version *#170602112302#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Firmware-Datum *#3283# bzw. *#DATE#
Nokia 2110j Secret Codes
IMEI Nummer *#06#
Software Version *#682371158412125#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Firmware-Datum *#3283# bzw. *#DATE#
Nokia 3110 Secret Codes
IMEI Nummer *#06#
Software Version *#0000# bzw. *#9999# bzw. *#3110#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Werkseinstellungen *#7780#
Simlock info *#92702689#
Nokia 3210 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#
Nokia 5110 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#
Provider lock status *#pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4
Nokia 5120 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#
Provider lock status *#pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4
Nokia 5130 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#
Provider lock status *#pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4
Nokia 5190 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#
Provider lock status *#pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4
Nokia 6110 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#
Nokia 6130 Secret Codes
IMEI Nummer *#06#
Software Version *#9999#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Servicemenü *#92772689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
6. Seite insgesamte bisherige Telefonzeit (min)
EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#
Nokia 6150 Secret Codes
IMEI Nummer *#06#
Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
EFR de/aktivieren *#3370#
Half Rate de/aktivieren *#4720#
Testmodus aktivieren *#746025625#
Nokia 7110 Secret Codes
IMEI Nummer *#06#
Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
Nokia 8110 Secret Codes
IMEI Nummer *#06#
Software Version *#8110#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Servicemenü *#92702689#
1. Seite IMEI
2. Seite Herstellungsdatum
3. Seite Kaufdatum
4. Seite Letzte Reparatur/Upgrade
5. Seite Transfer User Data
Testmodus aktivieren *#746025625#
Nokia 8148 Secret Codes
IMEI Nummer *#06#
Tastensperre MENU + *
Lautlos MENU + #
Nokia 8810 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Seriennummer *#92702689#
1. Screen Herstellungsdatum
2. Screen IMEI
3. Screen Kaufdatum
4. Screen Letzte Reparatur
Nokia 9000 Secret Codes
IMEI Nummer *#06#
Software Version *#682371158412125#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Firmware-Datum *#9999#
Nokia PT11 Secret Codes
IMEI Nummer *#06#
Software Version *#9999#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Nokia PT11NF Secret Codes
IMEI Nummer *#06#
Software Version *#170602112302# bzw. *#682371158412125#
1. Zeile Software Version
2. Zeile Datum der Software
3. Zeile Typ des Telefons
Firmware-Datum *#3283#
Panasonic
GD55/G50/G51/G70/A100/A101/A102/X300: with or w/o SIM press *#369# and go to menu ?°SW Version?±
- GD67/GD87/X60/X66/X100/X200/X400/X500: with SIM press *#9999# while phone searching for network
- X200 : with SIM press #02# while phone searching for network
- X6X : Power on the phone with valid sim card and tape this code : 52824**
then tape 746, Menu, Menu then enter your code
Philips
PHILIPS DIGA *#06# IMEI
*#3333*# Blocking list
*#2558*# All time connected
*#3377*# IMEI,FLAGS,SIM LOCK
*#7489*# Security code ???
*#3353*# clear Blocking List
PHILIPS FIZZ *#06# IMEI
*#8377*# Software version
*#1234*# Security code
*#5644*# Service code
PHILIPS SPARK *#06# IMEI
*#2254*# Status register
*#2255*# Some kind of monitor mode during dialing.
*#2558*# Time connected to net.
*#2562*# ??? number of reconnections
*#2565*# Warm restart
*#3333*# BLOCKINGLIST
*#2377*# ???BERR Phone waits random time and reconnects to network.
*#3377*# Information, SIM-lock
*#7378*# SIM info
*#7489*# SECURITY CODE
*#7693*# Sleep mode
*#7948*# Turn off phone
*#8463*# Information on sleep mode
PHILIPS GENIE *#06# IMEI
*#2254*# STATUS REGISTER
*#2255*# Some kind of monitor mode during dialing.
*#2377*# ???BERR reconnect?
*#2355*# Near Cell Mode. U can see parameters of three nearest cells
*#2558*# Time connected
*#2562*# number of reconnections
*#2565*# Warm restart
*#2772*# Base Station Paging Multiframe.
*#2847*# HIDDEN MENU!: 5.5:Closed User Groups
*#3333*# BLOCKING - list
*#3353*# clears Blocking list
*#3377*# SIM LCK
*#4263*# Hs-OK:0 KO:0 , HNS-OK:0 KO:0
*#4377*# ??? battery charging ???
*#7378*# SIM phase
*#7489*# Security code
*#7693*# SLEEP-mode
*#7948*# Turn off
Samsung
E710/715
*#32436837# DAI ON Digital Audio Interference On
*#3243948# DAI OFF Digital Audio Interference Off
*#9324# MONITOR
*#0746# SSMS MEMORY:20
*#0842# vibra on
*#0289# buzzer on
*#4357# HELP (4357) This screen!!!!!!!
*#7777# verze SW
*#8888# verze HW
*#9999# Revize HW
*#0782# cas provozu, zapnit? a vypnit? - LIVE TIMER
*#0523# 41 (80) menu: 12
*#0638# SIM: f23003 F230 030
*#0778# SST size: 10
*#9273696# Java D/L setting
*#92782# Wap user agent
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm - YAMAHA OK
*#0778# Sim Service table
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
E700/S500 100%..... X100/X600???!!!???
#*566335# Wap model ID
#*5663352# java model
#*5663351# model
#*53696# java download mode
#*536963# serial enabl others disabled
#*536962# HTTP enabl WAPSAR disabled
#*536961# WAPSAR enabl HTTP dis
*663867 MF file dumped
*335 All MMS mes deled
*2767*77667# Spain MMS settings
*2767*78667# Portugal
*2767*65667# Netherland
*2767*29667# Czech
*2767*28667# Austria
*2767*48667# Italy
*2767*37667# France
*2767*85667# Uk
*2767*33667# Germany
*2767*73738927# MMS Reset????
*2767*77927# Spain WAP Setting are applied
*2767*78927# Portugal
*2767*29927# Czech
*2767*65927# Netherlands
*2767*28927# Austria
*2767*37927# France
*2767*48927# Italy
*2767*85927# Uk
*2767*33927# Germany
#7263867# Ram Dump On
#*3232# Current Mode - DCD mode
#*3231# DCD en TRACE dis
#*3230# TRACE en DCD dis
#*7247# ??????
#*3683# ??????
#*3777# ??????
#*3779# ??????
#*8645# ??????
#*6428# MIC measuremnt CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6422# MIC dep RXdata CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6421# MIC on CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6420# MIC off CMD: Set, DSPMTCV11, MICHDW in cihard. opt
*#7465625# Stav z?mku
#7465625*28746# Aktivn? z?mek deaktivov?n
*7465625*28746# Automatick? z?mek perzonalizov?n
#7465625*2827# Z?mek Auto CP deaktivov?n
*7465625*2827# Z?mek s?te se mus? aktivovat
#7465625*2877# Z?mek Auto SP deaktivov?n
*7465625*2877# Z?mek s?te se mus? aktivovat
#7465625*28782# Automatick? z?mek podskupiny deaktivov?n
*7465625*28782# Z?mek s?te se mus? aktivovat
#7465625*28638# Automatick? z?mek s?te deaktivov?n
*7465625*28638# Automatick? z?mek s?te perzonalizov?n
#7465625*228# Aktivn? z?mek deaktivov?n
*7465625*228# Aktivn? z?mek perzonalizov?n
#7465625*746* ???????
*7465625*746* ???????
#7465625*27* ???????
*7465625*27* ???????
#7465625*77* ???????
*7465625*77* ???????
#7465625*782* ???????
*7465625*782* ???????
#7465625*638* ???????
*7465625*638* ???????
*#8377466# SW + HW info
*#8888# HW info
*#9999# SW info
*#8999*8376263# komplet info
*#8999*636# IPD info
#*2677# ARM state: None
#*0000# ??????
*#8999*324# Net monitor??
#*6200#
#*6700#
#*6900#
#*7200# neplatn? ?roven pr?stupu
#*6100# command #*6100# Executed
*2767*3700# SGH-E700 BSI
*2767*7100# SGH-S100
*2767*8200# SGH-V200
*2767*7300# SGH-S300
#0111*codigo#
*2767*637#
*2767*688#
*2767*wap#
*2767*media#
*2767*mms#
*2767*226372# Camera Reset
*2767*688# MEP off
*2767*927# WAP
*2767*2878# E2P Custom reset
*2767*3855# E2P Full reset
*2767*2878# Sec reset
#*7828# C??? Midi Ri51
#*5111# PI 0813 33 99 MSI 7 NA 0 18 P99 T00 CffHff
#*2562# nejakej reset
#*2565# no blocking General Defense
#*3353# General defense Code Erased
#*3837# reset ???????
#*3849# reset ???????
#*3851# reset ???????
#*3876# reset ???????
#*7337# reset ???????
#*5376# reset All SMS Deleted
#*7222# Operation Typ: Class C GSM
#*7224# Error!!!!
#*7252# Operation Typ: Class B GSM
#*7271# multi Slot Class 1 GPRS
#*7274# multi Slot Class 4 GPRS
#*2787# CRTP on - Batery options
#*3737# L1 AFC DeltaF -36 NbAfcCorr 0 AdjustFoi 0 CumFoi 0
#*3825# Command #*3825# Executed
#*5133# L1 HO Data Async HO 83 Sync HO 0 HO Fail 0 TCH 40
#*7288# GPRS Detached
#*7287# GPRS Detached
#*7666# SrCell data RAC 255 NMO 255
#*7693# Sleep Deact
#*7284# Class B
#*2256# Calibr - info
#*2286# DATAbattery
#*2527# GPRS switching set to class 4
#*2679# Copycat feat. Activated
#*3940# External looptest 9600bps not avalible in SYSOL2!
#*4263# handsfree mode Activated
#*4700# Half rate deact
#*7352# BVMC Reg vaule Set BMVC to 00H For Cmd set DEBUGBATTERY in cihard.opt
#*8462# Sleeptime sinc SwitchOf
#*2558# Time ON For Cmd set DEBUGBATTERY in cihard.opt
#*3370# EFR Deact
#*3941# External looptest 115200bps not avalible in SYSOL2!
#*5176 L1 Sleep TOI N:5 TOI P:0
#*7462# SIM phase 3
#*7983# Voltage/Freg Deact
#*7986# Voltage Activated
#*8466# Old time
#*2255# Call failed mode: Command not Implemented
#*2285 nic
#*46539 nic
#*5143 nic
#*7629 nic
#*7646 nic
#*7665 nic
#*7633 nic
#*7626 nic
#*5174 nic
#*5175 nic
#*5177 nic
#*5156 nic
#*2282 nic
#*5132 nic
#*7276 nic
#*2355 nic
#*3333 nic
#*3377 nic
#*5187# L1C2G trace Activated
#*6837# Official SW version: 120107A1
#*7524# KCGPRS: +data
#*7562# LOCI GPRS: +data
#*7638# RLC allwazs open ended TBF Actiated
#*7632# Sleep mode Debug: +data
#*7673# Sleep mode RESET
#*2337# Permanent Registrtion Beep: NOT YET IMPLEMENTED
#*2474# For Cmd set DEBUGBATTERY in cihard.opt
#*2834# Audio Pth Mobile Normal
#*3270# DCS support Deact
#*3282# Data Deact
#*3476# EGSM Deact
#*3676# falh volume formated
#*4674# IMSI: +data
#*4760# GSM Activated
#*4864 pro tento model nic
#*5171 data
#*5172 data
#*5173 data
#*7326# Accessorz: vibrator
#*7676# Command #*7676# Executed
#*7683# Sleep variable
#*7762# SMS Bearer CS Activated
#*7957# Command #*7957# Executed
#*8465# Time in L1 +data
#*9278# Command #*9278# Executed
#*9795# WTLS key Reset
#*2252# Current call: +data
#*2836# AVDDSS Managment Deact.
#*3877# Dump of SPY trace: +data
#*7728# RSAV done
sharp reset EEP
1, push at once key 0+3+right option key up+red key (white screen)
2, in sequence push key 0,1,2,3, right option key up,1 (service menu)
3, write 99 and push right option key up
4, write 01 and push right option key up (now start RESET EEPROM)
Wait.....
5, push any key
6, push blue key menu (save)
7, power off
Sharp GX-10 unlock solution
With Sim Card (of locked network) in phone:
*01763*6371# and press M.
In menu go to: SETTINGS->SELECT->SECURITY
then in Security menu:MEP LOCKS->SELECT
insert default security code 0000
In menu go to NETWORK and choose DEACTIVATE
press SELECT and insert 812664697614
Press OK, phone anwser will be:
Sony-Ericssion
*#06# Imei Number.
>*<<*<* Software version.
*#0000# Default English.
<**< unlock Menu

ham vui:D

thanks anh nhé.

có thể nói rõ khi nào dung mã lệnh nào cho tất cả mọi người hiểu được không bạn.Dù sao cũng cảm ơn bạn nhiều

đọc đến mờ cả mắt luôn.THANK anh!

bạn oi có mã reset máy tàu ko bạn ơi cho mình nhé thanks

cảm ơn cát anh nhiều lắm

Trích:

---

Được post bởi hoangsuu@mobile

bạn oi có mã reset máy tàu ko bạn ơi cho mình nhé thanks

---

1122 0000

thank bạn nhiều nhiều

upppppppppppppppppppppppppppp

thanks đã chia sẻ

giờ thì có khi đầy đủ rồi đấy nhỉ



Không Spam bài cũ.Close thread