-
Trích:
Được post bởi
HoangThong_hotrokythuat5
a làm ơn cho e hỏi là hôp nbox với mx key bây g khoản bnhie6u vây khỏi cáp luôn chỉ hai thứ do thôi
-
-
MCN fix Firmware china U18 OK máy chập nguồn thay con CPU hết chập nhưng lỗi phần mềm kẹp nguồn lên giao động nhưng không lên nguồn format cũng không lên. tìm file không có. dùng mcn read file ra rồi witer lại lên nguồn OK
[IMG]http://www.****.vn/highslide/graphics/warning.gif[/IMG]
[IMG]http://pic.****.vn/Qupload/pic/****.vn_1%2810%29.png[/IMG]
Welcome to use McnBox!
Selected COM4
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN20110119D110D
Firmware V1.10
Checksum 812B-B3BE
Box Connected!
Ready working at COM4
-------------------------------
Start Scanning...
->......
Results:
CPU: MT6223.
VCC:17,GND:18 20,RXD:23,TXD:24
[V:17 G:18 20 R:23 T:24] Apply to Box
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6223 Ver: 8A05 SW:8A00
CPU ID: 0D4E0C00
Please select Boot5
Initialize Boot4 ...
Flash(Nor) Type [ST] M30L0T7000T0,M36L0T7050T0
Flash(Nor) Code 002088C4(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud...
Set Baud:921600 Done.
Start Reading(Nor)...
The phone information:
J23_PCB01_GPRS_MT6223_S00.SW_V00_03_SHANGLUTONG.BI N
Phone has been encrypted
Read Done !
Time used: 4 mins 13 s
File Saved: E:\J23_PCB01_GPRS_MT6223_S00.SW_V00_03_SHANGLUTONG .BIN
The File Information:
J23_PCB01_GPRS_MT6223_S00.SW_V00_03_SHANGLUTONG.BI N
File has been encrypted
>>
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6223 Ver: 8A05 SW:8A00
CPU ID: 0D4E0C00
Please select Boot5
Initialize Boot4 ...
Flash(Nor) Type [ST] M30L0T7000T0,M36L0T7050T0
Flash(Nor) Code 002088C4(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Checking baud...
Set Baud:921600 Done.
Proceding MTK6223 CPU encryption...
Auto Proceeded 2
OK
Start Writing(Nor)...
Write Done !
Time used: 5 m 27 s
-
Firmware V1.15
Checksum
Software V3.27
Box Connected!
Ready working at COM26
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6268 Ver: 8B01 SW:8B01
Initialize Boot6 ...
Flash(Nand) Type [ST] NAND01GR3B
Flash(Nand) Code 002000A1(00000015)
Flash(Nand) Size 0x08400000 Hex Bytes
Start formatting (Nand) ...
Formatting Nand Flash...2000000--5FFFFFF
Format (nand) Done!
Phone should be Switched on
Phone detected, wait...
SN to be changed...
Write imei Fail
Phone should be Switched on
Phone detected, wait...
SN to be changed...
Done, IMEI-2: 98003700428947-2
Phone should be Switched on
Phone detected, wait...
SN to be changed...
Done, IMEI-1: 98003700422705-0
-
MT6268 mang infinyti GPG Spidmen đều không được. Vác MCN ra 1 phát ầm ầm luôn! hi hi
-
co bac nao chi giup em mcn cap moi phai dung nhu the nao em dung khong wen
