Đã ai unlock được Motorola 3G M1000 thì chỉ cho em với. Thank.
Bản in
Đã ai unlock được Motorola 3G M1000 thì chỉ cho em với. Thank.
use Smartclip + testpoint -> ok
Đến lúc anh mua thiết bị rồi đó. :DTrích:
Được post bởi vinhmap
cẩn thân banh sác..Trích:
Được post bởi juses80
Cái này bạn dùng smart-clip là ok .Nhưng bạn phải chế cáp lại,lấy cáp USB của sharp GX-30.Sau đó làm theo hướng dẫn:Trích:
Được post bởi vinhmap
Unlock procedure for M1000
Models with boot versions up to 0.6.1.2 could be unlocked simply by pressing "Unlock" button on *. (standard unlock procedure for P2K models)
Boot version 0.6.1.2 needs to be unlocked via Remove RSA option.
Power the phone ON;
Connect the phone to a powered clip;
Launch SmartMoto;
Press Search button in SmartMoto;
Program should detect the handset;
Go to Unlock tab;
Press Remove RSA;
Phone enters boot mode, message "Waiting" appears on the bottom of the screen;
Press 1 and 2 keys simultaneously in upper part of the handset and SmartMoto will continue the process;
Program will show a popup window with description of procedure to follow:
Remove phone battery
Ensure that USB cable is plugged to the phone
Press phone keys 1 and 2 simultaneously
While holding Button 1 and Button 2, insert battery
Release button 1 and 2
Message "Waiting" should appear on the bottom of phoneТs display
Press and release phone keys 1 and 2 simultaneously once more
Message "Waiting" should disappear, press 'OK' to continue
SmartMoto finishes removing RSA, the handset turns ON;
Now phone requires being unlocked with Unlock button of *;
Connect the phone to the powered clip
Press UNLOCK button on the clip
Phone reloads. Within 5-10 seconds message "Waiting" appears on the bottom of the phoneТs display
Press 1 and 2 keys simultaneously in upper part of the handset. Message "Waiting" disappears, phone enters boot mode (if you don't press these 2 keys during message "Waiting" is displayed, the clip will give red E/G led and you will have to start with step 1 again)
After 1 and 2 keys have been pressed E/G green led will blink and phone reboots. Meanwhile E/G will give frequent green blinking and phone will turn on.
Do not disconnect cell phone from * while green led indicator blinks!
Green E/G led glows.
The cell phone is unlocked.
Models with higher boot version will require Testpoint procedure to be unlocked.
Please be aware that TP procedure for M1000 and data cable differs from other P2K models.
Testpoint unlock procedure for M1000
Disassemble the phone;
Connect USB-data cable;
Connect Testpoint A to Testpoint B;
Press Button 1 and Button 2 simultaneously;
While holding Button 1 and Button 2 insert battery;
Release Button 1 and Button 2 for 1 second;
Press and release again Button 1 and Button 2 simultaneously;
Press Search button in SmartMoto;
SmartMoto should detect УS Blank Paragon POGФ or УS Blank Rainbow POGФ;
Disconnect Testpoint;
Go to Unlock tab of SmartMoto.
Select required model from the list;
Press Unlock via Testpoint;
Assemble the handset, itТs ready for use.
Chúc bạn thành công :p :p :p
Thao tác cực kì đơn giản, nhưng cẩn thận cọng cáp. Sơ xuất là hối ko kịp
vậy là phải độ lại cáp hả anh vậy sẵn up pinout của nó luôn đi anh thanks :)Trích:
Được post bởi Start307
bảo trọng :DTrích:
Được post bởi langa
rất chi là tuyệt vờiTrích:
Được post bởi trieubk
em cũng đang cần pinout để xử chú này đây
thank!
M1000 PHOMA thì ok nhưng là DOCOMO thì unlock được chưa vậy các anh :confused: