[Xin giúp] mx- box k chạy dc dòng máy N7610

chạy các máy khác ok, 7610 thì k
scan thì ok, log đây:

Phone type: RH-51 (Nokia 7610)
SW version: V 2006_wk41 11-10-06 RH-51 (c) Nokia.
Imei plain: 35707000703999-5
Cellular system: GSM
ASIC ID: 0x1081, type: 5
Ppm Id: 01
Language Pack:
English,German,French (France)

ImageFileVersion: 7.0642.0
ProductProfile: default.pp
Imei net: 35707000703999
Version: SIMLOCKLIB VERSION 2.29
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000000005

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
ImageFileVersion: 7.0642.0
ProductProfile: default.pp

bus check thì báo lỗi

MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 5] - C0853831
Using device: HTI BOX, FW ver: 00.17
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
ASIC ID: 0x1081 [UPP_WD2 ver: 3.1]
SecondaryBoot: w3_2nd.fia [WD2 BT2] version: 4.76.0 revision: 0.7 size: 0x10D8
Supported Ids: 1080, 1081
Error flash config request!i:

(trong khi đó box JAF vẫn chạy đc bình thường)

mình nghĩ do cài đặt sai gì đó
AE nào biết xin giúp
thank!