Xin giúp mxkey + USF hwk không check hay flash được!!!!!!!!!!
mình mới dùng mxkey 3.5 rev 2.1 có kết hợp cùng hwk để chạy qua cáp, nhưnh không thể nào buschek hay flash được. còn mxkey chạy qua usb hoàn toàn bình thường. MONG AE AI BIẾT GIÚP ĐỠ!!!!
---------- Post added at 06:53 PM ---------- Previous post was at 06:46 PM ----------
LOG CHAY THỬ 110I SỐNG NGUYÊN ĐÂY : Module ver: 1.0.0.17602(14-06-2011), Library ver: 1.0.0.14060(05-05-2012)
Boot error: 43 5B 5D 04
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
Processing MCU file: rh93_07.020
[DCT4,DCT4 ALGORITHM] size: 1.89 MB
Supported Ids: 0120, 0121, 1021, 1120, 1130, 1131, 1201, 2140, 2142, 2201, 2031, 2030, 2032, 2033
Boot error: 43 5B 5D 04
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
flashing terminated ! :confused:
