Thông tin bộ phận bán hàng  THÔNG TIN LIÊN HỆ BỘ PHẬN BÁN HÀNG & DỊCH VỤ CỦA HOÀNG THÔNG MOBILE Tại Đây!



IPBox For ALL IPhone 2G 3G 3Gs 4 4s 5 5c 5s IPBox NEW For ALL IPhone 2G --> 5s (All iOS version ): Remove lock code - Fix Disable - No need restore !!! HOT HOT
Slim-sim support iphone 6 plus , 6, 5, 5s, 5c, 5, 4s for OS 8.0.2 Slim-sim support iphone 6 plus , 6, 5, 5s, 5c, 5, 4s for OS 8.0.2
R Sim unlock iphone 4s, 5, 5s, 5c R Sim unlock iphone 4s, 5, 5s, 5c !!!
Nhận thay mặt kiếng cảm ứng Iphone - Samsung Nhận thay mặt kiếng cảm ứng Iphone - Samsung
Heicard nanosim unlock for Iphone 5 Heicard nanosim unlock for Iphone 5, 5C , 5S
Bảng giá thiết bị unlock và chạy phần mềm tại HOANG THONG MOBILE Bảng giá thiết bị unlock và chạy phần mềm tại HOANG THONG MOBILE
Bảng giá dịch vụ unlock online Dịch vụ unlock online - WWW.UNLOCKONLINE.VN


SHARE BÀI VIẾT NÀY :
+ Trả lời bài viết
Trang 1 của 2 1 2 CuốiCuối
Kết quả 1 tới 10 của 17
  1. #1
    Product Supporter HoangThong_hotrokythuat5's Avatar
    Ngày tham gia
    Jan 2009
    Bài viết
    284
    Cám ơn !!!
    1
    Thanked 187 Times in 78 Posts

    Mặc định Flash nokia thành công bằng BB5 Easy Service Tool (BEST) Nokia Dongle anh em post tại đây nhé

    Mở hàng nè flash tiếng việt n95 8g



    Connect phone on selected interface...

    Phone found!
    Series 60 Device detected!
    read info... - Ok

    Read and Check phone data...
    ----------------------
    RAP_BOOT: 0B01010202010000
    RAP_PUB: 14C0000759860058C7D7C936DEAA734EAC62F55B
    CMT_ROOT: CAEEBB65D3C48E6DC73B49DC5063A2EE
    RAP_PAPUB: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
    APE_ROOT: BA8710A7E1CD5A2909B9A875DB27AA24
    ----------------------
    Live Test Ok!
    ----------------------
    CMT Flash ID: 327E0001 < SPANSION => 71NS128P
    APE Flash ID: 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
    ------------------------
    SDD Key status : SD Data is Ok
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Done!

    Reading Phone Info....
    Connected phone - Nokia N95 8GB
    Software ver : V 06wk41v64.20 01-10-09 RM-320 (c) Nokia
    IMEI : 352946020082366
    Ape Ver : 35.0.001
    APE Var : 35.0.00118.01
    APE ADSP: 256
    DSP Ver : aino.ICPR62_08w28p2
    APE Test: rm421_eno_2008wk02v0.030
    PPM :
    CNT : RM320_31.0.002_U01 r RM421_002_000_M040
    Product SN : MTG113819
    Product code : 0561948
    Base Prd.code: 0558708
    Module code :
    Long Prod.SN : 0
    Hardware info=======
    HWID : 3000
    Retu : 15
    Tahvo : 22
    Batery: 3843 mV
    Camera:
    CMT BT:
    APE BT: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
    APE HW: 1
    LCDVer:
    RF ic :
    Lock info ===========
    IMEI : 352946020082366
    IMEI spNet : 3A 25 49 06 02 80 32 06
    IMEI svNet : 33 25 49 06 02 80 32 16 F4

    Conf key : 0000000000000000
    Provider key : 2440700000000000
    Provider : AT&T;U.S.A. (3650)
    Counters : Key 0 [3] , Fbus 0 [10]
    Blocks : 7

    LOCK STATUS :
    =============================
    BLK : 1
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS : All Open
    =============================
    CRT308 Backup Created...

    User Code : 12345
    UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

    Done!

    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : RM-320_35.0.001_PR.C0R
    PPM : RM-320_35.0.001_PR.v18
    CNT : RM320_31.0.002_025_xxx_U01_uda.fpsx
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Manual mode selected
    Backup CRT308 data...
    CRT308 Backup Created...
    Check communication with phone....
    ADL Boot req
    Communication verify done... Preparing...
    Gathering phone info...
    RAP_BOOT: 0B01010202010000
    RAP_PUBLIC: 14C0000759860058C7D7C936DEAA734EAC62F55B
    CMT_ROOTKEY: CAEEBB65D3C48E6DC73B49DC5063A2EE
    RAP_PAPUBKEY: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
    APE_ROOTKEY: BA8710A7E1CD5A2909B9A875DB27AA24
    Check communication with phone...
    CMT Loader len: 214912, CHK: 6F71
    Sending CMT boot....
    APE Loader len: 1573888, CHK: 2831
    Sending APE boot....
    Boot done
    TIME : Boot time : 00:00:13
    Reboot....
    Reopening the connection...
    Waiting for response: 30
    Waiting for response: 29
    Waiting for response: 28
    Waiting for response: 27
    Waiting for response: 26
    Waiting for response: 25
    Waiting for response: 24
    Waiting for response: 23
    Waiting for response: 22
    Waiting for response: 21
    Waiting for response: 20
    Waiting for response: 19
    Waiting for response: 18
    Waiting for response: 17
    Waiting for response: 16
    Waiting for response: 15
    ADL Server confirm flashmode!
    ADL : Auth Ok
    ADL : ASIC CMT select Ok
    ADL : ASIC APE select Ok
    ===Flashing [MCU]===
    Erase : Processing RM-320_35.0.001_PR.C0R
    Found 3 areas to erase
    Erasing area 0x00080000 - 0x007CF385, NOR, CMT
    Result: 0000
    Erasing area 0x00000000 - 0x0005FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00880000 - 0x00FDFFFF, NOR, CMT
    Result: 0000
    Found 8 areas to erase
    Erasing area 0x00000200 - 0x0000AFFF, NAND, APE
    Result: 0000
    Erasing area 0x0000B800 - 0x000AFFFF, NAND, APE
    Result: 0000
    Erasing area 0x00000000 - 0x00000FFF, NAND, APE
    Result: 0000
    Erasing area 0x0000D800 - 0x0000E9FF, NAND, APE
    Result: 0000
    Erasing area 0x00080000 - 0x000BFFFF, NAND, APE
    Result: 0000
    Erasing area 0x000E0000 - 0x0045FFFF, NAND, APE
    Result: 0000
    Erasing area 0x004C0000 - 0x0073FFFF, NAND, APE
    Result: 0000
    Erasing area 0x00A40000 - 0x06F3FFFF, NAND, APE
    Result: 0000
    Partitioning : Ok [5]
    TIME : Erase time : 00:01:25
    Write : Processing RM-320_35.0.001_PR.C0R
    Total 441 [68/373/0] blocks to write, writing...
    CMT : Writing Hash CERT [NOLO]
    CMT : Writing Hash CERT [KEYS]
    CMT : Writing Hash CERT [PRIMAPP]
    CMT : Writing Hash CERT [PASUBTOC]
    CMT : Writing Hash CERT [PAPUBKEYS]
    CMT : Writing Hash CERT [UPDAPP]
    CMT : Writing Hash CERT [DSP0]
    CMT : Writing Hash CERT [MCUSW]
    APE : Writing Hash CERT [X-LOADER]
    APE : Writing Hash CERT [KEYS]
    APE : Writing Hash CERT [PRIMAPP]
    APE : Writing Hash CERT [X-LOADER]
    APE : Writing Hash CERT [KEYS]
    APE : Writing Hash CERT [PRIMAPP]
    APE : Writing Hash CERT [SOS+XZIP]
    APE : Writing Hash CERT [PASUBTOC]
    APE : Writing Hash CERT [PAPUBKEYS]
    APE : Writing Hash CERT [SOS+UPDAPP]
    APE : Writing Hash CERT [SOS+CORE]
    APE : Writing Hash CERT [SOS+ROFS]
    TIME : Write time : 00:05:29
    MCU Write done
    ===Flashing [PPM]===
    Erase : Processing RM-320_35.0.001_PR.v18
    Found 1 areas to erase
    Erasing area 0x05140000 - 0x06F3FFFF, NAND, APE
    Result: 0000
    Partitioning : Ok [5]
    TIME : Erase time : 00:00:00
    Write : Processing RM-320_35.0.001_PR.v18
    Total 55 [0/55/0] blocks to write, writing...
    APE : Writing Hash CERT [SOS+ROFX]
    TIME : Write time : 00:00:44
    PPM Write done
    ===Flashing [CNT]===
    Erase : Processing RM320_31.0.002_025_xxx_U01_uda.fpsx
    Found 1 areas to erase
    Erasing area 0x06F40000 - 0x0F87FFFF, NAND, APE
    Result: 0000
    TIME : Erase time : 00:00:00
    Write : Processing RM320_31.0.002_025_xxx_U01_uda.fpsx
    Total 210 [0/210/0] blocks to write, writing...
    TIME : Write time : 00:02:53
    CNT Write done
    =================
    ADL : End flashing
    ADL : Close CMT session Ok
    ADL : Close APE session Ok

    Flashing done!
    Total flash time : 00:10:33
    Reboot phone now...

    Reading Phone Info....
    Connected phone - Nokia N95 8GB
    Software Info: V 06wk41v64.20 01-10-09 RM-320 (c) Nokia
    IMEI: 352946020082366
    Ape Version: 35.0.001
    Product code: 0561948
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    AfterFlash operations done... Reconnect, wait...
    Done!

    Elapsed: 00:12:45

    Connect phone on selected interface...

    Phone found!
    Series 60 Device detected!
    read info... - Ok

    Reading Phone Info....
    Connected phone - Nokia N95 8GB
    Software ver : V 06wk41v64.20 01-10-09 RM-320 (c) Nokia
    IMEI : 352946020082366
    Ape Ver : 35.0.001
    APE Var : 35.0.00118.01
    APE ADSP: 256
    DSP Ver : aino.ICPR62_08w28p2
    APE Test: rm421_eno_2008wk02v0.030
    PPM :
    CNT : RM320_31.0.002_U01 r RM421_002_000_M040
    Product SN : MTG113819
    Product code : 0561948
    Base Prd.code: 0558708
    Module code :
    Long Prod.SN : 0
    Hardware info=======
    HWID : 3000
    Retu : 15
    Tahvo : 22
    Batery: 3753 mV
    Camera:
    CMT BT:
    APE BT: HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
    APE HW: 1
    LCDVer:
    RF ic :
    Lock info ===========
    IMEI : 352946020082366
    IMEI spNet : 3A 25 49 06 02 80 32 06
    IMEI svNet : 33 25 49 06 02 80 32 16 F4

    Conf key : 0000000000000000
    Provider key : 2440700000000000
    Provider : AT&T;U.S.A. (3650)
    Counters : Key 0 [3] , Fbus 0 [10]
    Blocks : 7

    LOCK STATUS :
    =============================
    BLK : 1
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS : All Open
    =============================
    CRT308 Backup Created...

    User Code : 12345
    UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

    Done!

    Phone disconected!

    Connect phone on selected interface...

  2. ( HoangThong_hotrokythuat5 ) đã được 2 thành viên cám ơn vì bài viết hữu ích!

    GIA NGUYỄN_MOBILE (27-08-2011), MT BOX (29-06-2011)

  3. #2
    Technical Assistance GIALAI_GSM's Avatar
    Ngày tham gia
    Dec 2009
    Địa điểm
    GIALAI
    Bài viết
    2,866
    Cám ơn !!!
    413
    Thanked 1,155 Times in 713 Posts

    Mặc định

    flash full 5130c = usb ok





    card found: S/N ******
    registered to: avtarkaint

    Connect phone on selected interface...

    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : rm495__07.95.mcusw
    PPM : rm495__07.95.ppm_mh
    CNT : rm495__07.95_v2.image_mh_blu
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Getting product info...
    Dead Mode is Selected
    Waiting for USB device...
    --- Press phone's power button or insert cable & charger! ---
    Connection opened successfully
    Waiting for communication response.
    [BB5 FLASH]: Bootrom Ok!
    RAP_PUB: 230001031EA87D56F5B83690BA22FFDF586ADF35
    CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
    PatchRAWLoader: Patched OK
    Processing RAWLOADER...
    Processing UPDAPP...
    Processing PASUBTOC...
    TIME : Boot time : 00:00:06
    Reopening the connection...
    Waiting for response: 30
    ADL -> [2nd] changing...
    ADL Server confirm flashmode!
    ADL : Check data
    ADL : Data accepted
    ADL : ASIC CMT select Ok
    ===Flashing [MCU]===
    Erase : Processing rm495__07.95.mcusw
    Found 6 areas to erase
    Erasing area 0x00000000 - 0x000006BF, NOR, CMT
    Result: 0000
    Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
    Result: 0000
    Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:02:11
    Write : Processing rm495__07.95.mcusw
    Total 1178 [1178/0/0] blocks to write, writing...
    CMT : Writing Hash CERT [NOLO]
    CMT : Writing Hash CERT [KEYS]
    CMT : Writing Hash CERT [PRIMAPP]
    CMT : Writing Hash CERT [PASUBTOC]
    CMT : Writing Hash CERT [PAPUBKEYS]
    CMT : Writing Hash CERT [UPDAPP]
    CMT : Writing Hash CERT [DSP0]
    CMT : Writing Hash CERT [MCUSW]
    TIME : Write time : 00:00:56
    MCU Write done
    ===Flashing [PPM]===
    Erase : Processing rm495__07.95.ppm_mh
    Found 1 areas to erase
    Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:00:53
    Write : Processing rm495__07.95.ppm_mh
    Total 450 [450/0/0] blocks to write, writing...
    TIME : Write time : 00:00:22
    PPM Write done
    ===Flashing [CNT]===
    Checking content info...
    Check Image : Content size is 128k, use direct write mode
    Erase : Processing rm495__07.95_v2.image_mh_blu
    Found 2 areas to erase
    Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:05:04
    Write : Processing rm495__07.95_v2.image_mh_blu
    Total 528 [528/0/0] blocks to write, writing...
    TIME : Write time : 00:00:26
    CNT Write done
    ADL : End flashing

    Flashing done!
    Total flash time : 00:09:54
    Reboot phone now...

    Reading Phone Info....
    Connected phone - Nokia 5130c-2
    Software Info: V 07.95 03-02-10 RM-495 (c) Nokia
    IMEI: 355232036781839
    PPM version : V 07.95 03-02-10 RM-495 (c) Nokia MH
    Product code: 0571965
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    Checking User Certificates...
    Total - 0 certs
    Uploading certificates...
    Writen 21 certs!
    AfterFlash operations done... Reconnect, wait...
    Done!

    Elapsed: 00:10:42

    Connect phone on selected interface...

    Phone found!
    Series 40 Device detected!
    read info... - Ok

    Phone disconected!

    Connect phone on selected interface...
    mobile services
    NHƯ HẠ
    129 Hùng Vương KrôngPa Gia Lai
    yahoo: gialai_gsm

  4. ( GIALAI_GSM ) đã được 2 thành viên cám ơn vì bài viết hữu ích!

    MT BOX (29-06-2011), trong khai (25-06-2011)

  5. #3
    Technical Assistance GIALAI_GSM's Avatar
    Ngày tham gia
    Dec 2009
    Địa điểm
    GIALAI
    Bài viết
    2,866
    Cám ơn !!!
    413
    Thanked 1,155 Times in 713 Posts

    Mặc định

    flash full 6300 ok



    Connect phone on selected interface...
    Check FlashFiles, Please, wait...
    Files Set for Flashing :
    MCU : rm217__07.30.mcusw
    PPM : rm217__07.30.ppm_v
    CNT : rm217__07.30.image_v
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Getting product info...
    Dead Mode is Selected
    Waiting for USB device...
    --- Press phone's power button or insert cable & charger! ---
    Connection opened successfully
    Waiting for communication response.
    [BB5 FLASH]: Bootrom Ok!
    RAP_PUB: 07D001199E626B56FB37F0E35885D1007F382542
    CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1
    PatchRAWLoader: Patched OK
    Processing RAWLOADER...
    Processing UPDAPP...
    -> Error while send data to phone!
    Check battery, connection. Try again
    Connect phone on selected interface...
    -> Error while flashing...
    Check FlashFiles, Please, wait...
    Files Set for Flashing :
    MCU : rm217__07.30.mcusw
    PPM : rm217__07.30.ppm_v
    CNT : rm217__07.30.image_v
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Getting product info...
    Dead Mode is Selected
    Waiting for USB device...
    --- Press phone's power button or insert cable & charger! ---
    Connection opened successfully
    Waiting for communication response.
    [BB5 FLASH]: Bootrom Ok!
    RAP_PUB: 07D001199E626B56FB37F0E35885D1007F382542
    CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1
    PatchRAWLoader: Patched OK
    Processing RAWLOADER...
    Processing UPDAPP...
    Processing PASUBTOC...
    TIME : Boot time : 00:00:05
    Reopening the connection...
    Waiting for response: 30
    ADL -> [2nd] changing...
    ADL Server confirm flashmode!
    ADL : Check data
    ADL : Data accepted
    ADL : ASIC CMT select Ok
    ===Flashing [MCU]===
    Erase : Processing rm217__07.30.mcusw
    Found 9 areas to erase
    Erasing area 0x00000000 - 0x000006BF, NOR, CMT
    Result: 0000
    Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x01060000 - 0x01067FFF, NOR, CMT
    Result: 0000
    Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:01:48
    Write : Processing rm217__07.30.mcusw
    Total 944 [944/0/0] blocks to write, writing...
    CMT : Writing Hash CERT [NOLO]
    CMT : Writing Hash CERT [KEYS]
    CMT : Writing Hash CERT [PRIMAPP]
    CMT : Writing Hash CERT [PASUBTOC]
    CMT : Writing Hash CERT [PAPUBKEYS]
    CMT : Writing Hash CERT [UPDAPP]
    CMT : Writing Hash CERT [DSP0]
    CMT : Writing Hash CERT [MCUSW]
    CMT : Writing Hash CERT [PMM_CONF]
    CMT : Writing Hash CERT [SBIF_CONF]
    TIME : Write time : 00:01:50
    MCU Write done
    ===Flashing [PPM]===
    Erase : Processing rm217__07.30.ppm_r
    Found 1 areas to erase
    Erasing area 0x01080000 - 0x015FFFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:00:34
    Write : Processing rm217__07.30.ppm_r
    Total 329 [329/0/0] blocks to write, writing...
    TIME : Write time : 00:00:39
    PPM Write done
    ===Flashing [CNT]===
    Checking content info...
    Resetting phone...
    MMC pwd backup saved
    Checking CNT sector PN<>FL
    PN CNT sector : 64 kb
    Loader len: 248320, CHK: 36E3
    ADL -> Sending loader...
    Reset connection...
    ADL : Check data
    ADL : Data accepted
    ADL : ASIC CMT select Ok
    Erase : Processing rm217__07.30.image_ctv_cn
    Found 1 areas to erase
    Erasing area 0x01600000 - 0x01FDFFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:01:06
    Write : Processing rm217__07.30.image_ctv_cn
    Total 292 [292/0/0] blocks to write, writing...
    TIME : Write time : 00:00:33
    CNT Write done
    ADL : End flashing
    Flashing done!
    Total flash time : 00:06:33
    Reboot phone now...
    Reading Phone Info....
    Connected phone - Nokia 6300
    Software Info: V 07.30 07-05-09 RM-217 (c) Nokia.
    IMEI: 356960013897892
    PPM version : V 07.30 07-05-09 RM-217 (c) Nokia. R
    Product code: 0515596
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    Checking User Certificates...
    Total - 0 certs
    Uploading certificates...
    Writen 21 certs!
    AfterFlash operations done... Reconnect, wait...
    Done!
    mobile services
    NHƯ HẠ
    129 Hùng Vương KrôngPa Gia Lai
    yahoo: gialai_gsm

  6. ( GIALAI_GSM ) đã được 2 thành viên cám ơn vì bài viết hữu ích!

    GIA NGUYỄN_MOBILE (27-08-2011), trong khai (25-06-2011)

  7. #4
    Technical Assistance GIALAI_GSM's Avatar
    Ngày tham gia
    Dec 2009
    Địa điểm
    GIALAI
    Bài viết
    2,866
    Cám ơn !!!
    413
    Thanked 1,155 Times in 713 Posts

    Mặc định

    flash full 3110c ok. nhanh gần bằng ATF




    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : rm237__07.21.mcusw
    PPM : rm237__07.21.ppm_v
    CNT : rm237__07.21.image_v_128
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Getting product info...
    Dead Mode is Selected
    Waiting for USB device...
    --- Press phone's power button or insert cable & charger! ---
    Connection opened successfully
    Waiting for communication response.
    [BB5 FLASH]: Bootrom Ok!
    RAP_PUB: 2FB0011445137F5673FE301155BA142970721AA6
    CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1
    PatchRAWLoader: Patched OK
    Processing RAWLOADER...
    Processing UPDAPP...
    Processing PASUBTOC...
    TIME : Boot time : 00:00:05
    Reopening the connection...
    Waiting for response: 30
    ADL -> [2nd] changing...
    ADL Server confirm flashmode!
    ADL : Check data
    ADL : Data accepted
    ADL : ASIC CMT select Ok
    ===Flashing [MCU]===
    Erase : Processing rm237__07.21.mcusw
    Found 9 areas to erase
    Erasing area 0x00000000 - 0x000006BF, NOR, CMT
    Result: 0000
    Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x01060000 - 0x01067FFF, NOR, CMT
    Result: 0000
    Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:01:46
    Write : Processing rm237__07.21.mcusw
    Total 944 [944/0/0] blocks to write, writing...
    CMT : Writing Hash CERT [NOLO]
    CMT : Writing Hash CERT [KEYS]
    CMT : Writing Hash CERT [PRIMAPP]
    CMT : Writing Hash CERT [PASUBTOC]
    CMT : Writing Hash CERT [PAPUBKEYS]
    CMT : Writing Hash CERT [PAPUBKEYS]
    CMT : PAPUBKEYS skip, already sent
    CMT : Writing Hash CERT [UPDAPP]
    CMT : Writing Hash CERT [DSP0]
    CMT : Writing Hash CERT [MCUSW]
    CMT : Writing Hash CERT [PMM_CONF]
    CMT : Writing Hash CERT [SBIF_CONF]
    TIME : Write time : 00:00:45
    MCU Write done
    ===Flashing [PPM]===
    Erase : Processing rm237__07.21.ppm_v
    Found 1 areas to erase
    Erasing area 0x01080000 - 0x0151FFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:00:30
    Write : Processing rm237__07.21.ppm_v
    Total 178 [178/0/0] blocks to write, writing...
    TIME : Write time : 00:00:08
    PPM Write done
    ===Flashing [CNT]===
    Checking content info...
    Check Image : Content size is 128k, use direct write mode
    Erase : Processing rm237__07.21.image_v_128
    Found 1 areas to erase
    Erasing area 0x01520000 - 0x01FDFFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:01:30
    Write : Processing rm237__07.21.image_v_128
    Total 208 [208/0/0] blocks to write, writing...
    TIME : Write time : 00:00:10
    CNT Write done
    ADL : End flashing

    Flashing done!
    Total flash time : 00:04:52
    Reboot phone now...
    mobile services
    NHƯ HẠ
    129 Hùng Vương KrôngPa Gia Lai
    yahoo: gialai_gsm

  8. ( GIALAI_GSM ) được 1 thành viên cảm ơn vì bài viết hữu ích!

    trong khai (25-06-2011)

  9. #5
    Technical Assistance GIALAI_GSM's Avatar
    Ngày tham gia
    Dec 2009
    Địa điểm
    GIALAI
    Bài viết
    2,866
    Cám ơn !!!
    413
    Thanked 1,155 Times in 713 Posts

    Mặc định

    flash full 5220 ok




    Connect phone on selected interface...

    Phone found!
    Series 40 Device detected!
    read info... - Ok

    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : rm411__07.23.mcusw
    PPM : rm411__07.23.ppm_mr
    CNT : rm411__07.23.image_ctv_india_blue
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Manual mode selected
    Backup CRT308 data...
    CRT308 Backup Created...
    Getting product info...
    RAP_BOOT: 0803000302010000
    RAP_PUBLIC: 1810010D9BB358500C903F4B095F45D924FDEE24
    CMT_ROOTKEY: 9DDBFCFE6E73CED7D8C6268C8EB85723
    RAP_PAPUBKEY: D93826B23E9B093BE4DD7304FBAA6778996AE60B
    Checking CNT sector PN<>FL
    PN CNT sector : 128 kb
    ConvertImage: Processing rm411__07.23.image_ctv_india_blue
    ConvertImage: Page Size is 128K, no need convert
    Error on content convert
    Loader len: 307008, CHK: C0CE
    ADL -> Sending loader...
    Update Server code succesfully sent to phone!
    TIME : Boot time : 00:00:04
    Reopening the connection...
    Waiting for response: 30
    Waiting for response: 29
    ADL -> [2nd] changing...
    ADL Server confirm flashmode!
    ADL : Check data
    ADL : Data accepted
    ADL : ASIC CMT select Ok
    ===Flashing [MCU]===
    Erase : Processing rm411__07.23.mcusw
    Found 6 areas to erase
    Erasing area 0x00000000 - 0x000006BF, NOR, CMT
    Result: 0000
    Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
    Result: 0000
    Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:02:36
    Write : Processing rm411__07.23.mcusw
    Total 1289 [1289/0/0] blocks to write, writing...
    CMT : Writing Hash CERT [NOLO]
    CMT : Writing Hash CERT [KEYS]
    CMT : Writing Hash CERT [PRIMAPP]
    CMT : Writing Hash CERT [PASUBTOC]
    CMT : Writing Hash CERT [PAPUBKEYS]
    CMT : Writing Hash CERT [UPDAPP]
    CMT : Writing Hash CERT [DSP0]
    CMT : Writing Hash CERT [MCUSW]
    TIME : Write time : 00:01:05
    MCU Write done
    ===Flashing [PPM]===
    Erase : Processing rm411__07.23.ppm_mr
    Found 1 areas to erase
    Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:01:06
    Write : Processing rm411__07.23.ppm_mr
    Total 461 [461/0/0] blocks to write, writing...
    TIME : Write time : 00:00:22
    PPM Write done
    ===Flashing [CNT]===
    Erase : Processing rm411__07.23.image_ctv_india_blue
    Found 2 areas to erase
    Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:05:37
    Write : Processing rm411__07.23.image_ctv_india_blue
    Total 648 [648/0/0] blocks to write, writing...
    TIME : Write time : 00:00:31
    CNT Write done
    ADL : End flashing

    Flashing done!
    Total flash time : 00:11:21
    Reboot phone now...

    Reading Phone Info....
    Connected phone - Nokia 5220 XpressMusic
    Software Info: V 07.23 17-07-09 RM-411 (c) Nokia
    IMEI: 356840021127906
    PPM version : V 07.23 17-07-09 RM-411 (c) Nokia MR
    Product code: 0576023
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    Settings After Flash Defaults...
    FullFactorySet...OK!
    ProductTuneSet...OK!
    SwUpgradeSet...OK!
    Checking User Certificates...
    Total - 0 certs
    Uploading certificates...
    Writen 21 certs!
    Set phone to Normal mode...
    AfterFlash operations done...
    Done!

    Elapsed: 00:12:21

    Connect phone on selected interface...
    mobile services
    NHƯ HẠ
    129 Hùng Vương KrôngPa Gia Lai
    yahoo: gialai_gsm

  10. ( GIALAI_GSM ) đã được 2 thành viên cám ơn vì bài viết hữu ích!

    MT BOX (29-06-2011), trong khai (25-06-2011)

  11. #6
    Technical Assistance GIALAI_GSM's Avatar
    Ngày tham gia
    Dec 2009
    Địa điểm
    GIALAI
    Bài viết
    2,866
    Cám ơn !!!
    413
    Thanked 1,155 Times in 713 Posts

    Mặc định

    FLASH 1280 RM647 OK

    [IMG][/IMG]


    Core version : 1.17 , Rev : 2.3

    Selected FlashSettings : Manual
    Files Set for Flashing :
    MCU : rm647_03.600
    PPM : rm647_03.60mr
    CNT : rm6470_nai03.60mr

    Infineon flashing...
    Booting phone now....
    Sync Ok , A2
    CPU ID : XGOLD , A200341100
    Boot Ok , 01
    PBL : SE0_091125 F11
    Algo Ok , 01
    SBL mode Ok
    SBL : Default_RAM_Bootloader
    EPP CFG [Bering]...
    FLASH ID : 0020000000C08800
    FLASH ID : ST, M58WR064
    Boot Done!

    ===Flashing [MCU]===
    File : rm647_03.600
    Image : hw_b2_rm647_r03.600.fls
    Cert block found, sending....
    Cert sent
    Found 3 region(s)
    Processing Region 1/3
    Erase , Start : 0x00800000 , Len : 0x00210000
    Erasing, wait ...
    Erase done
    Write , Start : 0x00800000 , Len : 0x00210000
    Flashing , wait ...
    Region flash done
    Processing Region 2/3
    Erase , Start : 0x00C60000 , Len : 0x001E8840
    Erasing, wait ...
    Erase done
    Write , Start : 0x00C60000 , Len : 0x001E8840
    Flashing , wait ...
    Region flash done
    Processing Region 3/3
    Erase , Start : 0x00FFC000 , Len : 0x00000040
    Erasing, wait ...
    Erase done
    Write , Start : 0x00FFC000 , Len : 0x00000040
    Flashing , wait ...
    Region flash done
    Check : 4445
    ===Flashing [PPM]===
    File : rm647_03.60mr
    Image : hw_b2_rm647_003.60mr.fls
    Cert block found, sending....
    Cert sent
    Found 1 region(s)
    Processing Region 1/1
    Erase , Start : 0x00210000 , Len : 0x00118700
    Erasing, wait ...
    Erase done
    Write , Start : 0x00210000 , Len : 0x00118700
    Flashing , wait ...
    Region flash done
    Check : 5870
    ===Flashing [CNT]===
    File : rm6470_nai03.60mr
    Image : hw_b2_rm6470_nai03.60mr.fls
    Cert block found, sending....
    Cert sent
    Found 1 region(s)
    Processing Region 1/1
    Erase , Start : 0x00EB0000 , Len : 0x0004C5C0
    Erasing, wait ...
    Erase done
    Write , Start : 0x00EB0000 , Len : 0x0004C5C0
    Flashing , wait ...
    Region flash done
    Check : 86E6

    Flashing done, rebooting...
    -> Infineon info : Do FullFactory Sets after flashing
    Flashing Done!

    Init Service mode... Wait...

    Afterflash settings...
    SW ver : V 03.60
    01-04-10
    RM-647
    (c) Nokia
    IMEI : 355351041056712
    PCode : 0592248
    Settings After Flash Defaults...
    FullFactorySet...OK!
    ProductTuneSet...OK!
    SwUpgradeSet...OK!
    All done!

    Connect phone on selected interface...

    Phone found!
    Series 40 Device detected!
    read info... - Ok
    mobile services
    NHƯ HẠ
    129 Hùng Vương KrôngPa Gia Lai
    yahoo: gialai_gsm

  12. #7
    Technical Assistance GIALAI_GSM's Avatar
    Ngày tham gia
    Dec 2009
    Địa điểm
    GIALAI
    Bài viết
    2,866
    Cám ơn !!!
    413
    Thanked 1,155 Times in 713 Posts

    Mặc định

    flash N95 RM159 Ok by BEST

    card found: S/N 104C:0118
    registered to: HTFONE_KRONGPA

    DLL not found...
    Connect phone on selected interface...

    UFS S/N 91UATUBT boot - Ok

    Connect phone on selected interface...

    Core version : 1.18 , Rev : 3.0

    Selected FlashSettings :
    Files Set for Flashing :
    MCU : RM-159_35.0.002_PR.C0R
    PPM : RM-159_35.0.002_PR.v18
    PPM2 : RM159_31.0.002_039_U01_uda.fpsx
    Check FlashFiles, Please, wait...
    -> SWversion check skipped : Dead mode selected

    Backup enabled, Will read Certificates now...
    Setting FlashMode
    FlashMode set Ok

    1st boot Ok, C0

    APE part info :
    APE ASICID : 24200705
    APE MODE ID : 00
    APE PUB ID : 595CE5A2EB727A58EFC800B9AE8D8245C706A754
    APE R_HASH : BA8710A7E1CD5A2909B9A875DB27AA24

    CMT part info :
    CMT ASICID : 000000010000022600010006400C192101011103
    CMT EM0 ID : 00000295
    CMT EM1 ID : 00000B22
    CMT PUB ID : 07A00118B85C00581A2F191A349EAF3AB899BC45
    CMT MODE ID : 00
    CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT ROM ID : F2C6EBADC86E6189

    CMT : Sending 2nd loader...
    Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
    CMT Loader sent, Boot Ok
    MCU Configuration
    FLASHID : 00350001 , CMT , NOR
    CMT Flash ID : 00350001 < SPANSION => 72NS128N
    FLCNT : 00000000000000000000000000000000000000
    FLASHID : 0000FFFF , CMT , MMC , EXT
    CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
    Sending ALGO....
    Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
    CMT Algo sent
    CMT PAPUB : 129A39D9A3B031CA0124E1E90F5A17ED3EFC896F00
    Transmission mode : Dual (Ddr, TX2)

    APE : Sending 2nd loader...
    Use : omap2420_m1_2nd.fg , Rev : 0.0 Ver : 1.39.0
    APE Loader sent, Boot Ok
    FLASHID : 004000EC , APE , NAND
    APE Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
    ALGO : OMAP2420 UNISTORE-II-1.5.1 AL
    FLMCID : 00FFFF00000000
    Sending ALGO....
    Use : teflon_sam_nand_xsr151_m1.fg , Rev : 0.0 Ver : 1.52.0
    APE Algo sent
    APE PAPUB : 129A39D9A3B031CA0124E1E90F5A17ED3EFC896E00
    Transmission mode : Dual (Ddr, TX2)

    Boot Done!

    CMT : Read NPC certificate...
    Cert size : 30600 byte(s)
    IMEI : 354835014500384
    CMT : Read CCC certificate...
    Cert size : 30600 byte(s)
    CMT : Read HWC certificate...
    Cert size : 16384 byte(s)
    CMT : Read VARIANT certificate...
    Cert size : 16384 byte(s)
    APE : Read NPC certificate...
    Cert size : 8192 byte(s)
    IMEI : 354835014500384
    APE : Read CCC certificate...
    Cert size : 8192 byte(s)
    APE : Read HWC certificate...
    Cert size : 8192 byte(s)
    APE : Read VARIANT certificate...
    Cert size : 0 byte(s)
    Cert Read done!

    Init Service mode... Wait...

    Init Service Mode Failed!
    NPC Certificate saved...
    CCC Certificate saved...
    HWC Certificate saved...
    NPC Certificate saved... (APE)
    CCC Certificate saved... (APE)
    HWC Certificate saved... (APE)

    RPL saved : C:\Program Files\InfinityBox\BEST\Backup\Cert\354835014500384 _CRT.rpl

    Setting FlashMode
    FlashMode set Ok

    1st boot Ok, C0

    APE part info :
    APE ASICID : 24200705
    APE MODE ID : 00
    APE PUB ID : 595CE5A2EB727A58EFC800B9AE8D8245C706A754
    APE R_HASH : BA8710A7E1CD5A2909B9A875DB27AA24

    CMT part info :
    CMT ASICID : 000000010000022600010006400C192101011103
    CMT EM0 ID : 00000295
    CMT EM1 ID : 00000B22
    CMT PUB ID : 07A00118B85C00581A2F191A349EAF3AB899BC45
    CMT MODE ID : 00
    CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT ROM ID : F2C6EBADC86E6189

    CMT : Sending 2nd loader...
    Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
    CMT Loader sent, Boot Ok
    MCU Configuration
    FLASHID : 00350001 , CMT , NOR
    CMT Flash ID : 00350001 < SPANSION => 72NS128N
    FLCNT : 00000000000000000000000000000000000000
    FLASHID : 0000FFFF , CMT , MMC , EXT
    CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
    Sending ALGO....
    Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
    CMT Algo sent
    CMT PAPUB : 129A39D9A3B031CA0124E1E90F5A17ED3EFC896F00
    Transmission mode : Dual (Ddr, TX2)

    APE : Sending 2nd loader...
    Use : omap2420_m1_2nd.fg , Rev : 0.0 Ver : 1.39.0
    APE Loader sent, Boot Ok
    FLASHID : 004000EC , APE , NAND
    APE Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
    ALGO : OMAP2420 UNISTORE-II-1.5.1 AL
    FLMCID : 00FFFF00000000
    Sending ALGO....
    Use : teflon_sam_nand_xsr151_m1.fg , Rev : 0.0 Ver : 1.52.0
    APE Algo sent
    APE PAPUB : 129A39D9A3B031CA0124E1E90F5A17ED3EFC896E00
    Transmission mode : Dual (Ddr, TX2)

    Boot Done!

    Partitioning....
    Partitioning Ok...
    Transmission mode : Dual (Ddr, TX2)
    Erase : Processing RM-159_35.0.002_PR.C0R
    Found 3 areas to erase, erase group
    Asic : CMT , Sub : NOR
    CMT , NOR , Area : 0x00080000 - 0x007B1641
    CMT , NOR , Area : 0x00000000 - 0x0005FFFF
    CMT , NOR , Area : 0x00880000 - 0x00FDFFFF
    Using TimeOut : 7 min ( 430 sec )
    Erasing, wait.....
    CMT : Group erase Ok
    Found 8 areas to erase, erase group
    Asic : APE , Sub : NAND
    APE , NAND , Area : 0x00000200 - 0x0000AFFF
    APE , NAND , Area : 0x0000B800 - 0x000AFFFF
    APE , NAND , Area : 0x00000000 - 0x00000FFF
    APE , NAND , Area : 0x0000D800 - 0x0000E9FF
    APE , NAND , Area : 0x00080000 - 0x000BFFFF
    APE , NAND , Area : 0x000E0000 - 0x0045FFFF
    APE , NAND , Area : 0x004C0000 - 0x0073FFFF
    APE , NAND , Area : 0x00A40000 - 0x0633FFFF
    Erasing, wait.....
    APE : Group erase Ok
    TIME : Erase time : 00:00:36
    Transmission mode : Dual (Ddr, TX2)
    Write : Processing RM-159_35.0.002_PR.C0R
    CMT: Writing Hash CERT [NOLO]
    CMT: Writing Hash CERT [KEYS]
    CMT: Writing Hash CERT [PRIMAPP]
    CMT: Writing Hash CERT [PASUBTOC]
    CMT: Writing Hash CERT [PAPUBKEYS]
    CMT: Writing Hash CERT [UPDAPP]
    CMT: Writing Hash CERT [DSP0]
    CMT: Writing Hash CERT [MCUSW]
    APE: Writing Hash CERT [X-LOADER]
    APE: Writing Hash CERT [KEYS]
    APE: Writing Hash CERT [PRIMAPP]
    APE: Writing Hash CERT [X-LOADER]
    APE: Writing Hash CERT [KEYS]
    APE: Writing Hash CERT [PRIMAPP]
    APE: Writing Hash CERT [SOS+XZIP]
    APE: Writing Hash CERT [PASUBTOC]
    APE: Writing Hash CERT [PAPUBKEYS]
    APE: Writing Hash CERT [SOS+UPDAPP]
    APE: Writing Hash CERT [SOS+CORE]
    APE: Writing Hash CERT [SOS+ROFS]
    Total writen 428 blocks
    TIME : Write time : 00:06:27


    Partitioning....
    Partitioning Ok...
    Transmission mode : Dual (Ddr, TX2)
    Erase : Processing RM-159_35.0.002_PR.v18
    Found 1 areas to erase, erase group
    Asic : APE , Sub : NAND
    APE , NAND , Area : 0x04C40000 - 0x0633FFFF
    Erasing, wait.....
    APE : Group erase Ok
    TIME : Erase time : 00:00:00
    Transmission mode : Dual (Ddr, TX2)
    Write : Processing RM-159_35.0.002_PR.v18
    APE: Writing Hash CERT [SOS+ROFX]
    Total writen 54 blocks
    TIME : Write time : 00:00:53


    Transmission mode : Dual (Ddr, TX2)
    Erase : Processing RM159_31.0.002_039_U01_uda.fpsx
    Found 1 areas to erase, erase group
    Asic : APE , Sub : NAND
    APE , NAND , Area : 0x06340000 - 0x0FA3FFFF
    Erasing, wait.....
    APE : Group erase Ok
    Erase CRTFL : SOS-USER
    APE : CRTFL erase Ok
    TIME : Erase time : 00:00:03
    Transmission mode : Dual (Ddr, TX2)
    Write : Processing RM159_31.0.002_039_U01_uda.fpsx
    Total writen 3032 blocks
    TIME : Write time : 00:06:08


    Init Service mode... Wait...

    Init Service mode Failed! Skip AfterFlash
    Connect phone on selected interface...

    mobile services
    NHƯ HẠ
    129 Hùng Vương KrôngPa Gia Lai
    yahoo: gialai_gsm

  13. ( GIALAI_GSM ) được 1 thành viên cảm ơn vì bài viết hữu ích!

    MT BOX (29-06-2011)

  14. #8
    Technical Assistance GIALAI_GSM's Avatar
    Ngày tham gia
    Dec 2009
    Địa điểm
    GIALAI
    Bài viết
    2,866
    Cám ơn !!!
    413
    Thanked 1,155 Times in 713 Posts

    Mặc định

    flash 6303i RM638 Ok by BEST

    Core version : 1.18 , Rev : 3.0

    Selected FlashSettings :
    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : rm638__06.61.mcusw
    PPM : rm638__06.61.ppm_v
    CNT : rm638__06.61.image_v_0594467_002
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Manual mode selected
    Backup CRT308 data...
    CRT308 Backup Created...
    Check communication with phone....
    ADL req restart
    Communication verify done... Preparing...
    Gathering phone info...
    Check communication with phone...
    Reboot....
    Connection opened successfully
    Waiting for communication response...
    [BB5 FLASH]: Bootrom Ok!
    ASIC ID: 000000010000022600000001020C192102054100
    EM0 ID: 00001040
    EM1 ID: 00001030
    PUBLIC ID: 28400109C8860E492043573E27F3D8A04771F63F
    ASIC MODE ID: 00
    ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
    ROM ID: 67E82268F29CEA60
    Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 11.4.0
    Processing RAWLOADER...
    FLIC : 003000EC
    Req : XSR 1.6
    Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 11.4.0
    Boot Done!
    TIME : Boot time : 00:00:04
    Reopening the connection...
    Waiting for response: 30
    ADL: Check mode
    Select ASIC [C900]
    ADL: phone is in flash mode

    Backup enabled, will read all certificates...
    Reading NPC certificate...
    IMEI : 358302033769694
    Reading CCC certificate...
    Reading HWC certificate...
    Reading R&D certificate...
    Reading VARIANT certificate...
    Cert Read done!

    NPC Certificate saved...
    CCC Certificate saved...
    HWC Certificate saved...
    SimLock Data saved...
    SimLock Key saved...
    WMDRM_PD Data saved...

    RPL saved : C:\Program Files\InfinityBox\BEST\Backup\Cert\358302033769694 _2nd.rpl

    ===Flashing [MCU]===
    Erase : Processing rm638__06.61.mcusw
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00
    Write : Processing rm638__06.61.mcusw
    CMT: Writing Hash CERT [ADA]
    CMT: Writing Hash CERT [KEYS]
    CMT: Writing Hash CERT [PRIMAPP]
    CMT: Writing Hash CERT [PASUBTOC]
    CMT: Writing Hash CERT [PAPUBKEYS]
    CMT: Writing Hash CERT [RAP3NAND]
    CMT: Writing Hash CERT [UPDAPP]
    CMT: Writing Hash CERT [DSP0]
    CMT: Writing Hash CERT [MCUSW]
    CMT: Writing Hash CERT [MCUSW1]
    CMT: Writing Hash CERT [GENIO_INIT]
    CMT: Writing Hash CERT [ISA+DYNSW]
    Total writen 125 blocks
    TIME : Write time : 00:00:34
    MCU Write done
    ADL: Request programm status
    NAND status : 00000003 / 00000003 / 00000000

    ===Flashing [PPM]===
    Erase : Processing rm638__06.61.ppm_v
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:00
    Write : Processing rm638__06.61.ppm_v
    Total writen 31 blocks
    TIME : Write time : 00:00:09
    PPM Write done
    ADL: Request programm status
    NAND status : 00000003 / 00000003 / 00000000

    ===Flashing [CNT]===
    Erase : Processing rm638__06.61.image_v_0594467_002
    Partitioning....
    Partitioning Ok...
    Erasing....
    Erasing Ok...
    TIME : Erase time : 00:00:01
    Write : Processing rm638__06.61.image_v_0594467_002
    Total writen 66 blocks
    TIME : Write time : 00:00:20
    CNT Write done
    ADL: Request programm status
    NAND status : 00000003 / 00000003 / 00000000

    ADL: Close_Session
    Content: 000300000000030000000300000000
    ADL: Reboot

    Flashing done!
    Total flash time : 00:01:07
    Reboot phone now...

    Reading Phone Info....
    Connected phone - Nokia 6303i classic
    Software Info: V 06.61 08-02-10 RM-638 (c) Nokia
    IMEI: 358302033769694
    PPM version : V 06.61 08-02-10 RM-638 (c) Nokia V
    Product code: 0594434
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    Settings After Flash Defaults...
    FullFactorySet...OK!
    ProductTuneSet...OK!
    SwUpgradeSet...OK!
    Checking User Certificates...
    Total - 34 certs
    Data exist, skip certificate repair...
    AfterFlash operations done... Reconnect, wait...
    Done!

    Elapsed: 00:01:27
    Connect phone on selected interface...

    Phone found!
    Series 40 Device detected!
    read info... - Ok

    mobile services
    NHƯ HẠ
    129 Hùng Vương KrôngPa Gia Lai
    yahoo: gialai_gsm

  15. ( GIALAI_GSM ) được 1 thành viên cảm ơn vì bài viết hữu ích!

    MT BOX (29-06-2011)

  16. #9
    3G MOBILE NGUYÊNQNGAI's Avatar
    Ngày tham gia
    May 2008
    Địa điểm
    86 phan đình phùng quảng ngãi
    Tuổi
    33
    Bài viết
    1,473
    Cám ơn !!!
    197
    Thanked 705 Times in 324 Posts

    Mặc định X7 rm_707 full factory ok by best



    card found: S/N 1927:0118
    registered to: 3g mobile

    Connect phone on selected interface...

    Phone found!
    Series 60 Device detected!
    read info... - Ok

    Connect phone on selected interface...

    Phone found!
    Series 60 Device detected!
    read info... - Ok

    Reading Phone Info....
    Connected phone - Nokia X7-00
    Software ver : V 92_11w15.4 17-05-11 RM-707 (c) Nokia
    IMEI : 356257048721142
    Ape Ver : 021.013
    APE Var : 021.013.00.01021.013.19.01021.013.C02.01
    APE ADSP: 256
    DSP Ver : 92_11w15
    APE Test: rm707_ENO_11w15v001_prd
    PPM :
    CNT :
    Product SN : M4H271579
    Product code : 059G565
    Base Prd.code: 059F8C6
    Module code : 0204661
    Long Prod.SN : 0
    Hardware info=======
    HWID : 1000
    Retu : 40
    Tahvo : 00
    Batery: 4051 mV
    Camera:
    CMT BT:
    APE BT: HCI Version 20 (rev. 64). LMP Version 44 (rev. 64). Manufacturer 2016.
    APE HW: 256
    LCDVer:
    RF ic :
    Lock info ===========
    IMEI : 356257048721142
    IMEI spNet : 3A 65 52 07 84 27 11 04
    IMEI svNet : 33 65 52 07 84 27 11 04 F9

    Conf key : 0000000000000000
    Provider key : 2440700000000000
    Provider : AT&T;U.S.A. (3650)
    Counters : Key 0 [3] , Fbus 0 [10]
    Blocks : 7

    LOCK STATUS :
    =============================
    BLK : 1
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS : All Open
    =============================
    CRT308 Backup Created

    User code : Crypted
    UserDataExLevel : Low [Gallery]

    Done!

    Resetting selected items...
    Check phone mode...
    Phone in Normal mode
    Seting Test mode... wait...
    Test mode set
    Settings Full Factory Defaults...
    Set OK!
    Settings User Data Defaults...
    Set OK!

    Elapsed: 00:00:29

    Phone disconected!

    Connect phone on selected interface...

    Phone found!
    Series 60 Device detected!
    read info... - Ok

    Set phone in Normal mode...
    Restarting...
    Done!
    TRUNG TÂM BẢO HÀNH SỬA CHỮA DTDD
    3G MOBILE-86 PHAN ĐÌNH PHÙNG THÀNH PHỐ QUẢNG NGÃI
    CUNG CẤP TẤT CẢ DỊCH VỤ ĐTDD _TEL 0964 5252 79

  17. #10
    Technical Assistance GIALAI_GSM's Avatar
    Ngày tham gia
    Dec 2009
    Địa điểm
    GIALAI
    Bài viết
    2,866
    Cám ơn !!!
    413
    Thanked 1,155 Times in 713 Posts

    Mặc định

    fix camera 5130c by USB OK







    Code:
    card found: S/N 104C:0118
    registered to: GIALAI_GSM
    
    Connect phone on selected interface...
    
    Phone found!
    Series 40 Device detected!
    read info...  - Ok
    
    Reading Phone Info....
    Connected phone -    Nokia 5130c-2
    Software ver : V 07.91 29-10-09 RM-495 (c) Nokia            
    IMEI    :      359336035272512
    Ape Ver :      
    APE Var :      
    APE ADSP:      
    DSP Ver :        ICPR72_09w33
    APE Test:      
    PPM     :      V 07.91 29-10-09 RM-495 (c) Nokia             V
    CNT     :      Content: v_red V 07.91 29-10-09 RM-495 (c) Nokia             
    Product SN   :     DSH187293
    Product code :     0571957
    Base Prd.code:     0567772
    Module code  :     0204024
    Long Prod.SN :     0
    Hardware info=======
    HWID  : 1000
    Retu  : 16
    Tahvo : 22
    Batery: 4094 mV
    Camera: 
    CMT BT: 2222-302
    APE BT: 
    APE HW: 
    LCDVer: SHARP
    RF ic : 
    Lock info ===========
    IMEI       : 359336035272512
    IMEI spNet : 3A 95 33 06 53 72 52 01 
    IMEI svNet : 33 95 33 06 53 72 52 41 F7 
    
    Conf key     : 0000000000000000
    Provider key : 2440700000000000
    Provider    : AT&T;U.S.A. (3650)
    Counters   : Key 0  [3] , Fbus 0  [10]
    Blocks      : 7
    
    LOCK STATUS :
    =============================
    BLK : 1
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
     Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS :  All Open
    =============================
    CRT308 Backup Created
    
    User Code : 12345
    MMC pwd  : no any record found
    UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 
    
    Done!
    
    Checking Camera Configuration...
    Check phone mode...
    Phone in Normal mode
    Seting Local mode... wait...
    Local mode set
    
    CAM1 HW : NIMMIIIIRRFF094B2F01
    CAM1 SW ver : 002014
    Updating Camera #1 Configuration...
    Upload done, checking...
    CAM1 SW ver : 002014
    Configuration Ok!
    
    Secondary Camera #2 configuration info not exist
    
    Done!
    mobile services
    NHƯ HẠ
    129 Hùng Vương KrôngPa Gia Lai
    yahoo: gialai_gsm

+ Trả lời bài viết
Trang 1 của 2 1 2 CuốiCuối

Thread Information

Users Browsing this Thread

Hiện có 1 người đang xem bài này . Bao gồm : 0 thành viên và 1 khách

     

Similar Threads

  1. BB5 Easy Service Tool (BEST) Nokia Dongle new update
    By TUYHOAGSM™ in forum Infinity Box
    Trả lời: 8
    Bài viết cuối: 11-06-2014, 11:51
  2. XIN GIÚP TOOL Nokia Best (BB5 Easy Service Tool Crack) MỚI NHÂT!
    By qthangmobile in forum Tool - Soft và phần mềm free!
    Trả lời: 3
    Bài viết cuối: 12-03-2013, 19:49
  3. BB5 Easy Service Tool [BEST] Dongle
    By saigonmobile in forum GIỚI THIỆU THIẾT BỊ - CABLE - GIẢI PHÁP MỚI NHẤT
    Trả lời: 26
    Bài viết cuối: 11-09-2012, 12:49
  4. Trả lời: 5
    Bài viết cuối: 12-01-2012, 20:34
  5. Video hướng dẫn chạy BB5 Easy Service Tool (BEST) Nokia Dongle
    By HoangThong_hotrokythuat5 in forum BB5 Easy Service Tool (BEST) Nokia Dongle
    Trả lời: 10
    Bài viết cuối: 27-09-2011, 09:41

Quyền viết bài

  • Bạn không thể tạo chủ đề mới
  • Bạn không thể gửi trả lời
  • Bạn không thể gửi đính kèm
  • Bạn không thể sửa bài viết của bạn
Lên đầu trang
Tăng like GSM video repair thiet bi sua chua slim sim, heicard, sim ghep unlock dien thoai